Sony HDR-FX1000 / HDR-FX1000E (serv.man3) Service Manual ▷ View online
6-20
HDR-FX1000/FX1000E_ADJ
12. 8F Page table
Note 1:
Note 1:
If reading/writing data on pages 8F, set data: 08 to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages 8F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: F. By this data set-
ting, the pages 8F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00
Fixed data-1 (Initialized data)
01 to 05
Fixed data-2
06 to 08
Fixed data-1 (Initialized data)
09
Fixed data-2
0A to 0F
Fixed data-1 (Initialized data)
10
Fixed data-2
11, 12
Fixed data-1 (Initialized data)
13
Fixed data-2
14 to 32
Fixed data-1 (Initialized data)
33
Fixed data-2
34
Fixed data-1 (Initialized data)
35
Fixed data-2
36 to 38
Fixed data-1 (Initialized data)
39
Fixed data-2
3A
Fixed data-1 (Initialized data)
3B
Fixed data-2
3C to 77
Fixed data-1 (Initialized data)
78 to 7A
Fixed data-2
7B to 7D
Fixed data-1 (Initialized data)
7E, 7F
Fixed data-2
80 to 8F
Fixed data-1 (Initialized data)
90, 91
Fixed data-2
92 to A3
Fixed data-1 (Initialized data)
A4, A5
Fixed data-2
A6 to C1
Fixed data-1 (Initialized data)
C2
Fixed data-2
C3 to E1
Fixed data-1 (Initialized data)
E2
Fixed data-2
E3
Fixed data-1 (Initialized data)
E4, E5
Fixed data-2
E6 to FF
Fixed data-1 (Initialized data)
Address
Initial value
Remark
NTSC PAL
29 to 2C
Fixed data-2
2D
Fixed data-1 (Initialized data)
2E
Fixed data-2
2F to 38
Fixed data-1 (Initialized data)
39 to 3E
Fixed data-2
3F, 40
Fixed data-1 (Initialized data)
41 to 44
Fixed data-2
45 to 48
Fixed data-1 (Initialized data)
49
Fixed data-2
4A to 50
Fixed data-1 (Initialized data)
51
Fixed data-2
52 to 58
Fixed data-1 (Initialized data)
59
Fixed data-2
5A to 66
Fixed data-1 (Initialized data)
67
Fixed data-2
68 to 7E
Fixed data-1 (Initialized data)
7F
Fixed data-2
80 to FF
Fixed data-1 (Initialized data)
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2008.11
6-21
HDR-FX1000/FX1000E_ADJ
13. 9D Page table
Note 1:
Note 1:
If reading/writing data on pages 9D, set data: 09 to page:
0, address: 10, and then select pages: D. By this data
setting, the pages 9D can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: D. By this data
setting, the pages 9D can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to 4F
Fixed data-1 (Initialized data)
14. 9E Page table
Note 1:
Note 1:
If reading/writing data on pages 9E, set data: 09 to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages 9E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: E. By this data set-
ting, the pages 9E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
15. 9F Page table
Note 1:
Note 1:
If reading/writing data on pages 9F, set data: 09 to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages 9F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: F. By this data set-
ting, the pages 9F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
16. AD Page table
Note 1:
Note 1:
If reading/writing data on pages AD, set data: 0A to page:
0, address: 10, and then select pages: D. By this data
setting, the pages AD can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: D. By this data
setting, the pages AD can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to 4F
Fixed data-1 (Initialized data)
17. AE Page table
Note 1:
Note 1:
If reading/writing data on pages AE, set data: 0A to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages AE can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: E. By this data set-
ting, the pages AE can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to 7B
Fixed data-1 (Initialized data)
7C, 7D
Fixed data-2
7E to F1
Fixed data-1 (Initialized data)
18. AF Page table
Note 1:
Note 1:
If reading/writing data on pages AF, set data: 0A to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages AF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: F. By this data set-
ting, the pages AF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
19. BE Page table
Note 1:
Note 1:
If reading/writing data on pages BE, set data: 0B to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages BE can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: E. By this data set-
ting, the pages BE can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to CA
Fixed data-1 (Initialized data)
CB to D0
Fixed data-2
D1 to F9
Fixed data-1 (Initialized data)
6-22
HDR-FX1000/FX1000E_ADJ
20. BF Page table
Note 1:
Note 1:
If reading/writing data on pages BF, set data: 0B to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages BF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: F. By this data set-
ting, the pages BF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to 44
Fixed data-1 (Initialized data)
45
Fixed data-2
46 to 63
Fixed data-1 (Initialized data)
64 to 6A
Fixed data-2
6B to BC
Fixed data-1 (Initialized data)
BD
Fixed data-2
BE to FF
Fixed data-1 (Initialized data)
21. C2 Page table
Note 1:
Note 1:
If reading/writing data on pages C2, set data: 0C to page:
0, address: 10, and then select pages: 2. By this data set-
ting, the pages C2 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 2. By this data set-
ting, the pages C2 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
22. C3 Page table
Note 1:
Note 1:
If reading/writing data on pages C3, set data: 0C to page:
0, address: 10, and then select pages: 3. By this data set-
ting, the pages C3 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 3. By this data set-
ting, the pages C3 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
23. C4 Page table
Note 1:
Note 1:
If reading/writing data on pages C4, set data: 0C to page:
0, address: 10, and then select pages: 4. By this data set-
ting, the pages C4 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 4. By this data set-
ting, the pages C4 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
24. C5 Page table
Note 1:
Note 1:
If reading/writing data on pages C5, set data: 0C to page:
0, address: 10, and then select pages: 5. By this data set-
ting, the pages C5 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 5. By this data set-
ting, the pages C5 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
25. C6 Page table
Note 1:
Note 1:
If reading/writing data on pages C6, set data: 0C to page:
0, address: 10, and then select pages: 6. By this data set-
ting, the pages C6 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 6. By this data set-
ting, the pages C6 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to DF
Fixed data-1 (Initialized data)
26. C7 Page table
Note 1:
Note 1:
If reading/writing data on pages C7, set data: 0C to page:
0, address: 10, and then select pages: 7. By this data set-
ting, the pages C7 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 7. By this data set-
ting, the pages C7 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2008.11
6-23
HDR-FX1000/FX1000E_ADJ
27. C8 Page table
Note 1:
Note 1:
If reading/writing data on pages C8, set data: 0C to page:
0, address: 10, and then select pages: 8. By this data set-
ting, the pages C8 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 8. By this data set-
ting, the pages C8 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
28. C9 Page table
Note 1:
Note 1:
If reading/writing data on pages C9, set data: 0C to page:
0, address: 10, and then select pages: 9. By this data set-
ting, the pages C9 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 9. By this data set-
ting, the pages C9 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
29. CA Page table
Note 1:
Note 1:
If reading/writing data on pages CA, set data: 0C to page:
0, address: 10, and then select pages: A. By this data set-
ting, the pages CA can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: A. By this data set-
ting, the pages CA can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
30. CB Page table
Note 1:
Note 1:
If reading/writing data on pages CB, set data: 0C to page:
0, address: 10, and then select pages: B. By this data set-
ting, the pages CB can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: B. By this data set-
ting, the pages CB can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to DF
Fixed data-1 (Initialized data)
31. CC Page table
Note 1:
Note 1:
If reading/writing data on pages CC, set data: 0C to page:
0, address: 10, and then select pages: C. By this data set-
ting, the pages CC can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: C. By this data set-
ting, the pages CC can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to C7
Fixed data-1 (Initialized data)
Click on the first or last page to see other HDR-FX1000 / HDR-FX1000E (serv.man3) service manuals if exist.