Sony DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man3) Service Manual ▷ View online
89
Advanced Playback Operations
If you use a cassette with cassette memory, you can search for the boundaries of a
recorded tape by title. Use the Remote Commander for this operation.
recorded tape by title. Use the Remote Commander for this operation.
Before operation
Set CM SEARCH in
Set CM SEARCH in
to ON in the menu settings. (The default setting is ON.)
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the TITLE
(2) Press SEARCH MODE on the Remote Commander repeatedly until the TITLE
SEARCH indicator appears. The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
(no indicator)
T
PHOTO SCAN
(3) Press . or > on the Remote Commander to select the title for playback.
Your camcorder automatically starts playback of the scene having the title that
you selected.
you selected.
[a] Actual point you are trying to search for
[b] Present point on the tape
[b] Present point on the tape
To stop searching
Press x.
If you use a cassette without cassette memory
You cannot superimpose or search a title.
You cannot superimpose or search a title.
If a tape has a blank portion between recorded portions
The title search may not work correctly.
The title search may not work correctly.
To superimpose a title
See page 119.
See page 119.
3
.
>
2
SEARCH
MODE
TITLE SEARCH
1 HELLO!
2 CONGRATULATIONS!
3 HAPPY NEW YEAR!
4 PRESENT
5 GOOD MORNING
6 WEDDING
2 CONGRATULATIONS!
3 HAPPY NEW YEAR!
4 PRESENT
5 GOOD MORNING
6 WEDDING
TITLE SEARCH
3 HAPPY NEW YEAR!
4 PRESENT
5 GOOD MORNING
6 WEDDING
7 NIGHT
8 BASEBALL
4 PRESENT
5 GOOD MORNING
6 WEDDING
7 NIGHT
8 BASEBALL
[b] [a]
Searching the boundaries of a recorded
tape by title – TITLE SEARCH
tape by title – TITLE SEARCH
90
You can automatically search for the point where the recording date changes and start
playback from that point (date search). Use a cassette with cassette memory for
convenience. Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
playback from that point (date search). Use a cassette with cassette memory for
convenience. Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
Searching for the date by using cassette memory
Before operation
•You can use this function only when playing back a cassette with cassette memory.
•Set CM SEARCH in
•You can use this function only when playing back a cassette with cassette memory.
•Set CM SEARCH in
to ON in the menu settings. (The default setting is ON.)
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the DATE
(2) Press SEARCH MODE on the Remote Commander repeatedly until the DATE
SEARCH indicator appears. The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
(no indicator)
T
PHOTO SCAN
(3) Press . or > on the Remote Commander to select the date for playback.
Your camcorder automatically starts playback at the beginning of the selected
date.
date.
[a] Actual point you are trying to search for
[b] Present point on the tape
[b] Present point on the tape
To stop searching
Press x.
Searching a recording by date
– DATE SEARCH
– DATE SEARCH
3
.
>
2
SEARCH
MODE
DATE SEARCH
1 SEP/ 5/02
2 SEP/ 6/02
3 DEC/24/02
4 JAN/ 1/03
5 FEB/ 11/03
6 APR/ 29/03
2 SEP/ 6/02
3 DEC/24/02
4 JAN/ 1/03
5 FEB/ 11/03
6 APR/ 29/03
DATE SEARCH
1 SEP/ 5/02
2 SEP/ 6/02
3 DEC/24/02
4 JAN/ 1/03
5 FEB/ 11/03
6 APR/ 29/03
2 SEP/ 6/02
3 DEC/24/02
4 JAN/ 1/03
5 FEB/ 11/03
6 APR/ 29/03
[b] [a]
91
Advanced Playback Operations
Searching a recording by date – DATE SEARCH
Note
If one day’s recording is less than two minutes, your camcorder may not accurately find
the point where the recording date changes.
If one day’s recording is less than two minutes, your camcorder may not accurately find
the point where the recording date changes.
If a tape has a blank portion between recorded portions
DATE SEARCH may not work correctly.
DATE SEARCH may not work correctly.
Cassette memory
The tape with cassette memory can hold six recording dates. If you search among seven
or more dates, see “Searching for the date without using cassette memory” below.
The tape with cassette memory can hold six recording dates. If you search among seven
or more dates, see “Searching for the date without using cassette memory” below.
Searching for the date without using cassette memory
(1) Set the POWER switch to VCR.
(2) Press MENU, then select CM SEARCH in
(2) Press MENU, then select CM SEARCH in
to OFF with the SEL/PUSH
EXEC dial (p. 213).
(3) Press SEARCH MODE on the Remote Commander repeatedly until the DATE
SEARCH indicator appears. The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN t (no indicator)
(4) Press . on the Remote Commander to search for the previous date or press
>
on the Remote Commander to search for the next date. Your camcorder
automatically starts playback at the point where the date changes. Each time
you press . or > your camcorder searches for the previous or next date.
you press . or > your camcorder searches for the previous or next date.
To stop searching
Press x.
92
You can search for a still image you have recorded on a tape (PHOTO SEARCH).
You can also search for still images one after another and display each image for
five seconds automatically regardless of cassette memory (PHOTO SCAN). Use the
Remote Commander for these operations.
Use this function to check or edit still images.
You can also search for still images one after another and display each image for
five seconds automatically regardless of cassette memory (PHOTO SCAN). Use the
Remote Commander for these operations.
Use this function to check or edit still images.
Searching for a photo by using cassette memory
Before operation
• You can use this function only when playing back a cassette with cassette memory.
• Set CM SEARCH in
• You can use this function only when playing back a cassette with cassette memory.
• Set CM SEARCH in
to ON in the menu settings. (The default setting is ON.)
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the
(2) Press SEARCH MODE on the Remote Commander repeatedly until the
PHOTO SEARCH indicator appears. The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
(no indicator)
T
PHOTO SCAN
(3) Press . or > on the Remote Commander to select the date for playback.
Your camcorder automatically starts playback of the photo having the date
that you selected.
that you selected.
[a] : Actual point you are trying to search for
[b] : Present point on the tape
[b] : Present point on the tape
To stop searching
Press x.
Searching for a photo
– PHOTO SEARCH/PHOTO SCAN
– PHOTO SEARCH/PHOTO SCAN
3
.
>
2
SEARCH
MODE
PHOTO SEARCH
1 SEP/ 5/02 5:30PM
2 SEP/ 6/02 8:50AM
3 DEC/24/02 10:30AM
4 JAN/ 1/03 11:25PM
5 FEB/ 11/03 4:11PM
6 APR/ 29/03 1:45PM
2 SEP/ 6/02 8:50AM
3 DEC/24/02 10:30AM
4 JAN/ 1/03 11:25PM
5 FEB/ 11/03 4:11PM
6 APR/ 29/03 1:45PM
PHOTO SEARCH
1 SEP/ 5/02 5:30PM
2 SEP/ 6/02 8:50AM
3 DEC/24/02 10:30AM
4 JAN/ 1/03 11:25PM
5 FEB/ 11/03 4:11PM
6 APR/ 29/03 1:45PM
2 SEP/ 6/02 8:50AM
3 DEC/24/02 10:30AM
4 JAN/ 1/03 11:25PM
5 FEB/ 11/03 4:11PM
6 APR/ 29/03 1:45PM
[b] [a]
Click on the first or last page to see other DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man3) service manuals if exist.