DOWNLOAD Sony DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man3) Service Manual ↓ Size: 7.2 MB | Pages: 127 in PDF or view online for FREE

VIDEO  EDIT
  EDIT  SET
    CONTROL
    ADJ  TEST
    ”CUT–IN”
    ”CUT–OUT”
    IR  SETUP
    PAUSEMODE
    IR  TEST
      

RETURN
EXECUTE

ENGAGE
REC  PAUSE

0:08:55:06

[ME

VIDEO  EDIT
  EDIT  SET
    CONTROL
    ADJ  TEST
    ”CUT–IN”
    ”CUT–OUT”
    IR  SETUP
    PAUSEMODE
    IR  TEST
      

EXECUTING

No. 5
  IN
  –60

0:08:55:06

[ME

VIDEO  EDIT
  EDIT  SET
    CONTROL
    ADJ  TEST
    ”CUT–IN”
    ”CUT–OUT”
    IR  SETUP
    PAUSEMODE
    IR  TEST
      RETURN

COMPLETE

0:08:55:06

[MENU] : END

VIDEO  EDIT
  EDIT  SET
    CONTROL
    ADJ  TEST
    ”CUT–IN”
    ”CUT–OUT”
    IR  SETUP
    PAUSEMODE
    IR  TEST
      RETURN

       0

0:08:55:06

[MENU] : END

VIDEO  EDIT
  EDIT  SET
    CONTROL
    ADJ  TEST
    ”CUT–IN”
    ”CUT–OUT”
    IR  SETUP
    PAUSEMODE
    IR  TEST
      RETURN

       0

0:08:55:06

[MENU] : END

Notes
•When you complete step 3, the image used to adjust the synchronization is recorded

for about 50 seconds.

•If you start recording from the very beginning of the tape, the first few seconds of the

tape may not record properly. Be sure to allow about 10 seconds’ lead before starting
recording.

•When the recording unit cannot be operated properly by the i.LINK cable, leave the

connection as it is, and make the A/V connecting cable settings (p. 99). Video and
audio are sent by digital signals.

(1) Insert the tape for playback into your camcorder, and insert a tape for

recording into the VCR.

(2) Press MENU, then turn the SEL/PUSH EXEC dial to set VIDEO EDIT in 

 to

TAPE, then press the dial (p. 217).

(3) Search for the beginning of the first scene you want to insert using the video

operation buttons, then pause playback.
You can fine-adjust one frame at a time with EDITSEARCH.

(4) Press MARK on the Remote Commander, or turn the SEL/PUSH EXEC dial to

select MARK, then press the dial.
The IN point of the first program is set, and the top part of the program mark
changes to light blue.

(5) Search for the end of the first scene you want to insert using the video

operation buttons, then pause playback. You can fine-adjust one frame at a
time with EDITSEARCH.

(6) Press MARK on the Remote Commander, or the SEL/PUSH EXEC dial.

The OUT point of the first program is set, then the bottom part of the program
mark changes to light blue.

(7) Repeat steps 3 to 6, then set the program.

When the program is set, the program mark changes to light blue.
You can set up to 20 programs in maximum.

OTHERS
  DATA  CODE
  BEEP
  COMMANDER
  DISPLAY
  VIDEO  EDIT
    RETURN

READY

[MENU] : END

OTHERS
  DATA  CODE
  BEEP
  COMMANDER
  DISPLAY
  VIDEO  EDIT
    RETURN

RETURN
TAPE
MEMORY

[MENU] : END

VIDEO  EDIT
  MARK
  UNDO
  ERASE  ALL
  START
  EDIT  SET

1   IN

0:08:55:06

TOTAL   0:00:00:00
SCENE  0

[MENU] : END

VIDEO  EDIT
  MARK
  UNDO
  ERASE  ALL
  START
  EDIT  SET

4   IN

0:10:01:23

TOTAL   0:00:47:12
SCENE  3

[MENU] : END

VIDEO  EDIT
  MARK
  UNDO
  ERASE  ALL
  START
  EDIT  SET

2   IN

0:09:07:06

TOTAL   0:00:12:00
SCENE  1

[MENU] : END

VIDEO  EDIT
  MARK
  UNDO
  ERASE  ALL
  START
  EDIT  SET

1   OUT

0:08:55:06

TOTAL   0:00:00:00
SCENE  0

[MENU] : END

N X

N X

N X

Erase OUT first and then IN from of the last program.

(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.

The last set program mark flashes, then the setting is canceled.

To cancel erasing
Select RETURN with the SEL/PUSH EXEC dial in step 2.

(1) Turn the SEL/PUSH EXEC dial to select ERASE ALL.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.

All the program marks flash, then the settings are canceled.

To cancel erasing all programs
Select RETURN with the SEL/PUSH EXEC dial in step 2.

To cancel a program you have set
Press MENU.
The program is stored in memory until the tape is ejected.

Note
You cannot operate recording during Digital program editing.

If the tape has a blank portion
You cannot set IN and OUT on the portion.

If there is a blank portion between IN and OUT on the tape
The total time code may not be displayed correctly.

Make sure that your camcorder and the VCR are connected, and that the VCR is set to
recording pause. When you use an i.LINK cable, the following procedure is not
necessary.
When you use a digital video camera recorder, set its power switch to VCR/VTR.

(1) Turn the SEL/PUSH EXEC dial to select START.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.

Search for the beginning of the first program, then start dubbing.
The program mark flashes.
The SEARCH indicator appears during search, and the EDITING indicator
appears during edit on the screen.
The PROGRAM indicator changes to light blue after dubbing ends.
When dubbing ends, your camcorder and the VCR automatically stop.

Press x using the video operation buttons.

Your camcorder stops when the dubbing ends. Then the display returns to VIDEO
EDIT in the menu settings.
Press MENU to erase the menu display.

You cannot record on the VCR when:
– The tape has run out.
– The write-protect tab on the cassette is set to lock.
– The IR SETUP code is not correct. (when IR is selected)
– The button to cancel recording pause is not correct. (when IR is selected)

NOT READY appears on the LCD screen when:
– The program to operate the Digital program editing has not been made.
– i.LINK is selected but an i.LINK cable is not connected.
– The power of the connected VCR is not turned on. (when you set i.LINK)