Sony DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man3) Service Manual ▷ View online
81
Advanced Recording Operations
Example
[a] REC TIME
[b]Waiting time
[c] INTERVAL
[b]Waiting time
[c] INTERVAL
You can make a time-lapse recording by setting the camcorder to automatically record
and standby sequentially. You can achieve an excellent recording for flowering, gradual
appearances, etc., with this function.
and standby sequentially. You can achieve an excellent recording for flowering, gradual
appearances, etc., with this function.
(1) In the standby, set INT. REC in
to SET in the menu setting. (p. 209)
(2) Turn the SEL/PUSH EXEC dial to set INTERVAL and REC TIME.
1
Turn the SEL/PUSH EXEC dial to select INTERVAL, then press the dial.
2
Turn the SEL/PUSH EXEC dial to select the desired interval time, then
press the dial.
The time: 30SEC y 1MIN y 5MIN y 10MIN
press the dial.
The time: 30SEC y 1MIN y 5MIN y 10MIN
3
Turn the SEL/PUSH EXEC dial to select REC TIME, then press the dial.
4
Turn the SEL/PUSH EXEC dial to select the desired recording time, then
press the dial.
The time: 0.5SEC y 1SEC y 1.5SEC y 2SEC
press the dial.
The time: 0.5SEC y 1SEC y 1.5SEC y 2SEC
5
Turn the SEL/PUSH EXEC dial to select
RETURN, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
10 min
10 min
1 s
1 s
9 min 59 s
9 min 59 s
[a]
[b]
[c]
3
CAMERA SET
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
ON
[MENU] : END
[MENU] : END
[MENU] : END
[MENU] : END
[MENU] : END
CAMERA SET
INT. REC
INTERVAL
REC TIME
RETURN
INT. REC
INTERVAL
REC TIME
RETURN
30SEC
CAMERA SET
INT. REC
INTERVAL
REC TIME
RETURN
INT. REC
INTERVAL
REC TIME
RETURN
30SEC
1MIN
5MIN
10MIN
1MIN
5MIN
10MIN
CAMERA SET
INT. REC
INTERVAL
REC TIME
RETURN
INT. REC
INTERVAL
REC TIME
RETURN
0.5SEC
CAMERA SET
INT. REC
INTERVAL
REC TIME
RETURN
INT. REC
INTERVAL
REC TIME
RETURN
0.5SEC
1SEC
1.5SEC
2SEC
1SEC
1.5SEC
2SEC
1
2
[MENU] : END
CAMERA SET
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
ON
OFF
SET
OFF
SET
STBY
STBY
STBY
STBY
[MENU] : END
CAMERA SET
INT. REC
INTERVAL
REC TIME
RETURN
INT. REC
INTERVAL
REC TIME
RETURN
30SEC
STBY
STBY
STBY
(continued on the following page)
Interval recording
82
Interval recording
5
4
MENU
POWER
OFF(CHG)
CAMERA
MEMORY/
NETWORK
VCR
INTERVAL
STBY
(4) Press MENU to erase the menu display. The INTERVAL indicator flashes.
(5) Press START/STOP to start interval recording. The INTERVAL indicator
(5) Press START/STOP to start interval recording. The INTERVAL indicator
lights up.
To cancel the interval recording
Perform either of the following:
– Set INT. REC to OFF in the menu settings.
– Set the POWER switch to other than CAMERA.
– Set INT. REC to OFF in the menu settings.
– Set the POWER switch to other than CAMERA.
To perform normal recording during the interval recording
Press START/STOP.
The interval indicator flashes. During the waiting time you can perform normal
recording only once.
To stop normal recording, press START/STOP again. Step4 is displayed on the screen.
The interval indicator flashes. During the waiting time you can perform normal
recording only once.
To stop normal recording, press START/STOP again. Step4 is displayed on the screen.
On recording time
There may be a discrepancy in the recording time of up to +/– six frames from the
selected time.
There may be a discrepancy in the recording time of up to +/– six frames from the
selected time.
When pressing START/STOP during recording time
Interval recording stops. To restart it, press START/STOP again.
Interval recording stops. To restart it, press START/STOP again.
83
Advanced Recording Operations
You can make a recording with a stop-motion animated effect using frame recording.
To create this effect, alternately move the subject a little and make a frame recording.
We recommend that you use a tripod, and operate your camcorder using the Remote
Commander after step 3.
To create this effect, alternately move the subject a little and make a frame recording.
We recommend that you use a tripod, and operate your camcorder using the Remote
Commander after step 3.
(1) In the standby, set FRAME REC in
to ON in the menu setting. (p.209)
(2) Press MENU to erase the menu display.
The FRAME REC indicator lights up.
(3) Press START/STOP to start frame recording. Your camcorder makes a
recording for about six frames, and returns to recording standby.
(4) Move the subject, and repeat step 3.
To cancel the frame recording
Perform either of the following:
– Set FRAME REC to OFF in the menu settings.
– Set the POWER switch to other than CAMERA.
– Set FRAME REC to OFF in the menu settings.
– Set the POWER switch to other than CAMERA.
Note
The remaining tape time is not indicated correctly if you use this function continuously.
The remaining tape time is not indicated correctly if you use this function continuously.
When using the frame recording
The last recorded frame is longer than other frames.
The last recorded frame is longer than other frames.
Frame by frame recording
– Frame recording
– Frame recording
MENU
1
3
CAMERA SET
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
ON
[MENU] : END
CAMERA SET
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
OFF
ON
ON
[MENU] : END
STBY
STBY
POWER
OFF(CHG)
CAMERA
MEMORY/
NETWORK
VCR
MENU
84
During playback, you can process a scene using the following picture effect:
NEG. ART, SEPIA, B&W and SOLARIZE.
NEG. ART, SEPIA, B&W and SOLARIZE.
(1) In the playback or playback pause, press MENU, then select P EFFECT in
with the SEL/PUSH EXEC dial, then press the dial (p. 208).
(2) Turn the SEL/PUSH EXEC dial to select the desired mode, then press the dial.
For details of each picture effect, see page 58.
To cancel the picture effect
Set P EFFECT to OFF in the menu settings.
Notes
•You cannot process externally input scenes using picture effect.
•You cannot record images on a tape on your camcorder when you have processed the
•You cannot process externally input scenes using picture effect.
•You cannot record images on a tape on your camcorder when you have processed the
image using the picture effect. However, you can record images on a “Memory Stick”
(p. 144, 156), or on a VCR using your camcorder as a player.
(p. 144, 156), or on a VCR using your camcorder as a player.
Pictures processed by picture effect
Pictures processed by picture effect are not output through the DV Interface.
Pictures processed by picture effect are not output through the DV Interface.
When you set the POWER switch to OFF (CHG) or stop playing back
Picture effect is automatically canceled.
Picture effect is automatically canceled.
— Advanced Playback Operations —
Playing back tapes with picture effect
MENU
1
MANUAL SET
P EFFECT
RETURN
P EFFECT
RETURN
OFF
NEG. ART
SEPIA
B&W
SOLARIZE
NEG. ART
SEPIA
B&W
SOLARIZE
[MENU] : END
Click on the first or last page to see other DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man3) service manuals if exist.