Sony DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man3) Service Manual ▷ View online
85
Advanced Playback Operations
1
2,3
FN
DIG
EFFT
EFFT
OK
OFF
STILL
FLASH
LUMI.
TRAIL
DIG EFFT
During playback, you can process a scene using the following digital effect:
STILL, FLASH, LUMI. and TRAIL.
STILL, FLASH, LUMI. and TRAIL.
(1) In the playback or playback pause, press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a desired digital effect appears.
(3) Press a desired mode. In the STILL or LUMI., the picture where you select the
(2) Press DIG EFFT. The screen to select a desired digital effect appears.
(3) Press a desired mode. In the STILL or LUMI., the picture where you select the
mode is stored in memory as a still image.
(4) Press –/+ to adjust the effect. Refer to page 60 for details.
(5) Press
(5) Press
OK to return to PAGE2.
To return to FN
Press EXIT.
To cancel the digital effect
Press
OFF to return to PAGE2.
Notes
•You cannot process externally input scenes using digital effect.
•You cannot record images on a tape on your camcorder when you have processed the
•You cannot process externally input scenes using digital effect.
•You cannot record images on a tape on your camcorder when you have processed the
image using digital effect. However, you can record images on a “Memory Stick”
(p. 144, 156), or on a VCR using your camcorder as a player.
(p. 144, 156), or on a VCR using your camcorder as a player.
Pictures processed by digital effect
Pictures processed by digital effect are not output through the DV Interface.
Pictures processed by digital effect are not output through the DV Interface.
When you set the POWER switch to OFF (CHG) or stop playing back
Digital effect is automatically canceled.
Digital effect is automatically canceled.
Playing back tapes with digital effect
86
You can enlarge playback images recorded on tapes. Besides the operation described
here, your camcorder can enlarge still images recorded on the “Memory Stick” (p. 173).
here, your camcorder can enlarge still images recorded on the “Memory Stick” (p. 173).
(1) In the playback or playback pause, press FN and select PAGE2.
(2) Press PB ZOOM. The PB ZOOM screen appears.
(3) Press the area you want to enlarge in the frame on the PB ZOOM screen.
(2) Press PB ZOOM. The PB ZOOM screen appears.
(3) Press the area you want to enlarge in the frame on the PB ZOOM screen.
The area you pressed moves to the center of the screen, and the playback
image is enlarged approximately at twice the size. If you press the other area
again, the area moves to the center of the screen.
image is enlarged approximately at twice the size. If you press the other area
again, the area moves to the center of the screen.
(4) Adjust the zoom ratio by the power zoom lever.
You can enlarge the image from approximately 1.1 times up to five times its
size.
size.
W: Decreases the zoom ratio.
T: Increases the zoom ratio.
To cancel the PB ZOOM
Press
END.
Enlarging images recorded on tapes
– Tape PB ZOOM
– Tape PB ZOOM
1
FN
2
PB
ZOOM
ZOOM
END
END
4
×
5.0
PB ZOOM
PB ZOOM
87
Advanced Playback Operations
Enlarging images recorded on tapes – Tape PB ZOOM
Notes
•You cannot process externally input scenes using the PB ZOOM.
•You cannot record images on a tape on your camcorder when you have processed the
•You cannot process externally input scenes using the PB ZOOM.
•You cannot record images on a tape on your camcorder when you have processed the
image using the tape PB ZOOM. However, you can record images on a VCR using
your camcorder as a player.
your camcorder as a player.
•You cannot record moving pictures on a “Memory Stick” on your camcorder when
you have processed the picture using the tape PB ZOOM.
The PB ZOOM is automatically canceled when you activate the following:
– Set the POWER switch to OFF (CHG).
– Stop playback.
– Press MENU.
– Insert a “Memory Stick”.
– Set the POWER switch to OFF (CHG).
– Stop playback.
– Press MENU.
– Insert a “Memory Stick”.
Pictures in the PB ZOOM
Pictures in the PB ZOOM are not output through the DV Interface and the (USB)
jack.
Pictures in the PB ZOOM are not output through the DV Interface and the (USB)
jack.
In the PB ZOOM
If you press DISPLAY/TOUCH PANEL button, the frame on the PB ZOOM screen
disappears. You cannot move the part you pressed to the center of the screen.
If you press DISPLAY/TOUCH PANEL button, the frame on the PB ZOOM screen
disappears. You cannot move the part you pressed to the center of the screen.
Edge of the enlarged image
The edge of the enlarged image cannot be displayed at the center of the screen.
The edge of the enlarged image cannot be displayed at the center of the screen.
88
Your camcorder goes forward or backward to automatically stop at a desired scene
having a tape counter value of “0:00:00”. Use the Remote Commander for this
operation.
having a tape counter value of “0:00:00”. Use the Remote Commander for this
operation.
(1) In the playback, press DISPLAY when the tape counter does not appear.
(2) Press ZERO SET MEMORY at the point you want to locate later. The tape
(2) Press ZERO SET MEMORY at the point you want to locate later. The tape
counter shows “0:00:00” and then starts counting. The ZERO SET MEMORY
indicator flashes.
indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the tape counter’s zero point. The tape stops
(4) Press m to rewind the tape to the tape counter’s zero point. The tape stops
automatically when the tape counter reaches approximately zero. The ZERO
SET MEMORY indicator disappears, and the time code appears.
SET MEMORY indicator disappears, and the time code appears.
(5) Press N. Playback starts from the counter’s zero point.
Notes
• When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
• When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
will be canceled.
• There may be a discrepancy of several seconds from the time code.
• The ZERO SET MEMORY indicator disappears when you press FN.
• The ZERO SET MEMORY indicator disappears when you press FN.
If a tape has a blank portion between recorded portions
The zero set memory may not work correctly.
The zero set memory may not work correctly.
Quickly locating a scene
– ZERO SET MEMORY
– ZERO SET MEMORY
ZERO SET MEMORY
DISPLAY
m
x
N
Click on the first or last page to see other DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man3) service manuals if exist.