DOWNLOAD Sony DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man3) Service Manual ↓ Size: 7.2 MB | Pages: 127 in PDF or view online for FREE

(1) Set the POWER switch to VCR.
(2) Press MENU, then turn the SEL/PUSH EXEC dial to select CM SEARCH in

 to OFF, then press the dial (p. 213).

(3) Press SEARCH MODE on the Remote Commander repeatedly until the

PHOTO SEARCH indicator appears. The indicator changes as follows:

DATE SEARCH t PHOTO SEARCH t PHOTO SCAN t (no indicator)

(4) Press . or > on the Remote Commander to select the photo for playback.

Each time you press . or > your camcorder searches for the previous or
next photo.
Your camcorder automatically starts playback of the photo.

Press x.

(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the

PHOTO SCAN indicator appears. The indicator changes as follows:

TITLE SEARCH* t DATE SEARCH t PHOTO SEARCH

(no indicator)

T

PHOTO SCAN

* Displayed only when CM SEARCH is set to ON in the menu settings.

(3) Press . or > on the Remote Commander.

Each photo is played back for about five seconds automatically.

Press x.

If a tape has a blank portion between recorded portions
PHOTO SEARCH/PHOTO SCAN may not work correctly.

The available number of photos that can be searched using the cassette memory
The available number is up to 12 photos. However, you can search 13 photos or more
using the PHOTO SCAN.

PHOTO  00

SCAN

You can dub or edit on the VCR connected to your camcorder using your camcorder as
a player.
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.

Before operation
•Set DISPLAY in 

 to LCD in the menu settings. (The default setting is LCD.)

•Press the following buttons to make the indicator disappear so that they will not be

superimposed on the edited tape:
On your camcorder:
DISPLAY/TOUCH PANEL, DATA CODE
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE

(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert

the recorded tape into your camcorder.

(2) Prepare the VCR for recording, then set the input selector to LINE.

Connect the A/V connecting cable to the AUDIO/VIDEO jack.
Refer to the operating instructions of the VCR.

(3) Set the POWER switch to VCR on your camcorder.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR. Refer to the operating instructions of your VCR.

Press x on both your camcorder and the VCR.

: Signal flow

VCR

Yellow

White

Red

A/V connecting
cable (supplied)

S VIDEO

VIDEO

AUDIO

IN

AUDIO/VIDEO

S VIDEO

 8 mm, 

 Hi8, 

 VHS, 

 S-VHS, 

 VHSC, 

 S-VHSC,

 Betamax, 

 ED Betamax, 

 mini DV, 

 DV,   Digital8, 

 MICRO MV

If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. When the white
plug is connected, the left channel audio is output, and when the red plug is connected,
the right channel audio is output.

If your VCR has an S video jack
Pictures can be reproduced more faithfully by using an S video cable (optional).
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
VCR.
This connection produces higher quality DV format pictures.