Sony DCR-TRV250 (serv.man3) Service Manual ▷ View online
89
Advanced Playback Operations
Your camcorder automatically searches for the scene having a tape counter value of
“0:00:00. ”
Use the Remote Commander for this operation.
Use this function, for example, to view a desired scene later on during playback.
“0:00:00. ”
Use the Remote Commander for this operation.
Use this function, for example, to view a desired scene later on during playback.
(1) In the playback mode, press DISPLAY when the tape counter is not displayed
on the screen.
(2) Press ZERO SET MEMORY at the point you want to locate later. The tape
counter shows “0:00:00,” then starts counting.
The ZERO SET MEMORY indicator flashes on the screen.
The ZERO SET MEMORY indicator flashes on the screen.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the counter’s zero point. The tape stops
(4) Press m to rewind the tape to the counter’s zero point. The tape stops
automatically when the counter reaches approximately zero. The ZERO SET
MEMORY indicator disappears, and the time code appears.
MEMORY indicator disappears, and the time code appears.
(5) Press N. Playback starts from the counter’s zero point.
Notes
•The zero set memory does not work with tapes recorded in the Hi8
•The zero set memory does not work with tapes recorded in the Hi8
/
standard 8 mm system.
•When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
is canceled.
•There may be a discrepancy of several seconds between the time code and the tape
counter.
If a tape has a blank portion between recorded portions
The zero set memory may not work correctly.
The zero set memory may not work correctly.
The zero set memory also in the standby mode
When you insert a scene in the middle of a recorded tape, press ZERO SET MEMORY at
the point you want to end the insertion. Rewind the tape to the insert start point, and
start recording. Recording stops automatically at the tape counter zero point. Your
camcorder returns to the standby mode.
When you insert a scene in the middle of a recorded tape, press ZERO SET MEMORY at
the point you want to end the insertion. Rewind the tape to the insert start point, and
start recording. Recording stops automatically at the tape counter zero point. Your
camcorder returns to the standby mode.
Quickly locating a scene
– ZERO SET MEMORY
– ZERO SET MEMORY
ZERO SET MEMORY
DISPLAY
m
x
N
90
Your camcorder can automatically search for the point where the recording date
changes and starts playback from that point.
Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
changes and starts playback from that point.
Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the DATE
(2) Press SEARCH MODE on the Remote Commander repeatedly until the DATE
SEARCH indicator appears on the screen. The indicator changes as follows:
DATE SEARCH
y (no indicator)
DATE SEARCH
t PHOTO SEARCH t PHOTO SCAN t (no indicator)
(3) When the current position is [b], press . to search toward [a] or press >
to search toward [c]. Your camcorder automatically starts playback at the point
where the date changes.
Each time you press . or >, your camcorder searches for the previous or
next date.
where the date changes.
Each time you press . or >, your camcorder searches for the previous or
next date.
To stop searching
Press x.
Searching for a recording by date
– DATE SEARCH
– DATE SEARCH
[a]
[b]
[c]
JUL 5 2003
JUL 4 2003
DEC 31 2003
3
2
SEARCH
MODE
DATE 01
SEARCH
DATE 00
SEARCH
91
Advanced Playback Operations
Notes
•The date search function does not work with tapes recorded in the Hi8
•The date search function does not work with tapes recorded in the Hi8
/
standard 8 mm system.
•If one day’s recording is less than two minutes, your camcorder may not accurately
find the point where the recording date changes.
If a tape has a blank portion between recorded portions
The date search function may not work correctly.
The date search function may not work correctly.
Searching for a recording by date – DATE SEARCH
92
You can search for the still image recorded on a tape (photo search).
You can also search for still images one after another and display each image for five
seconds automatically (photo scan).
Use the Remote Commander for these operations.
You can also search for still images one after another and display each image for five
seconds automatically (photo scan).
Use the Remote Commander for these operations.
Searching for a photo
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the
(2) Press SEARCH MODE on the Remote Commander repeatedly until the
PHOTO SEARCH indicator appears on the screen. The indicator changes as
follows:
DATE SEARCH
follows:
DATE SEARCH
t PHOTO SEARCH t PHOTO SCAN t (no indicator)
(3) Press . or > to select the photo for playback. Each time you press . or
>
your camcorder searches for the previous or next photo. Your camcorder
automatically starts playback of the photo.
To stop searching
Press x.
Searching for a photo
– PHOTO SEARCH/PHOTO SCAN
– PHOTO SEARCH/PHOTO SCAN
3
PHOTO 01
SEARCH
2
SEARCH
MODE
PHOTO 00
SEARCH
DCR-TRV250
Click on the first or last page to see other DCR-TRV250 (serv.man3) service manuals if exist.