Sony DCR-TRV250 (serv.man3) Service Manual ▷ View online
85
Advanced Playback Operations
During playback, you can process a scene using the following digital effects:
STILL, FLASH, LUMI. and TRAIL.
STILL, FLASH, LUMI. and TRAIL.
(1) In the playback mode or playback pause mode, press MENU to display the
menu settings.
(2) Turn the SEL/PUSH EXEC dial to select D EFFECT in
, then press the dial
(p. 211).
(3) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode, then
press the dial. The bars appear on the screen.
In the STILL or LUMI. mode, the picture shown when you press the SEL/
PUSH EXEC dial is captured and stored in memory as a still image at the time.
In the STILL or LUMI. mode, the picture shown when you press the SEL/
PUSH EXEC dial is captured and stored in memory as a still image at the time.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect, then press the dial.
For details of each digital effect, see page 65.
To cancel Digital effect
Set D EFFECT to OFF in the menu settings.
Playing back a tape with digital effects
4
2
MANUAL SET
D EFFECT
OFF
ST ILL
FLASH
LUMI.
TRAIL
D EFFECT
OFF
ST ILL
FLASH
LUMI.
TRAIL
[MENU] : END
MANUAL SET
D EFFECT
D EFFECT
LUMI.
[MENU] : END
I I I I I I I I
• • • • • • • •
1
1
MENU
86
Notes
•You cannot record images on a tape on your camcorder while you are processing the
•You cannot record images on a tape on your camcorder while you are processing the
image using Digital effect. However, you can record images as follows:
– on a “Memory Stick” as a still image
– on a VCR using your camcorder as a player
– on a “Memory Stick” as a still image
– on a VCR using your camcorder as a player
•Digital effect does not work with tapes recorded in the Hi8
/standard 8 mm
system.
•You cannot process externally input scenes using Digital effect.
Pictures processed by Digital effect
Pictures processed by Digital effect are not output through the DV jack.
Pictures processed by Digital effect are not output through the DV jack.
When you set the POWER switch to OFF (CHG) or stop playing back
Digital effect is automatically canceled.
Digital effect is automatically canceled.
Playing back a tape with digital effects
87
Advanced Playback Operations
You can enlarge an image recorded on tapes.
Besides the operation described here, your camcorder can enlarge still images recorded
on a “Memory Stick” (p. 172).
Besides the operation described here, your camcorder can enlarge still images recorded
on a “Memory Stick” (p. 172).
(1) In the playback or playback pause mode, press PB ZOOM. The center of the
image is enlarged to about twice its size, and
appear on the screen.
(2) Turn the SEL/PUSH EXEC dial to move the enlarged image, then press the
dial.
: To view the upper part of the image
: To view the lower part of the image
: To view the lower part of the image
(3) Turn the SEL/PUSH EXEC dial to move the enlarged image, then press the
dial.
: To view the left part of the image (Turn the dial downward.)
: To view the right part of the image (Turn the dial upward.)
: To view the right part of the image (Turn the dial upward.)
(4) Adjust the zoom ratio by the power zoom lever.
You can enlarge the image from 1.1 times up to five times its size.
W : To decrease the zoom ratio
T : To increase the zoom ratio
To cancel Tape PB ZOOM
Press PB ZOOM.
Enlarging recorded images
– Tape PB ZOOM
– Tape PB ZOOM
3
4
2
PB ZOOM
×
2.0
[EXEC] :
T
t
PB ZOOM
×
2.0
[EXEC] :
r
R
1
PB ZOOM
88
Notes
•You cannot record images on a tape or on a “Memory Stick” on your camcorder while
•You cannot record images on a tape or on a “Memory Stick” on your camcorder while
you are processing the image using Tape PB ZOOM. However, you can record images
on a VCR using your camcorder as a player.
on a VCR using your camcorder as a player.
•Tape PB ZOOM does not work with tapes recorded in the Hi8
/standard 8 mm
system.
•You cannot process externally input scenes using Tape PB ZOOM.
Images in Tape PB ZOOM
These images are not output through the DV jack.
These images are not output through the DV jack.
Tape PB ZOOM is automatically canceled when:
– The POWER switch is set to OFF (CHG).
– You stop playing back.
– You press MENU.
– You press TITLE.
– The POWER switch is set to OFF (CHG).
– You stop playing back.
– You press MENU.
– You press TITLE.
Enlarging recorded images – Tape PB ZOOM
Click on the first or last page to see other DCR-TRV250 (serv.man3) service manuals if exist.