Sony DCR-TRV250 (serv.man3) Service Manual ▷ View online
93
Advanced Playback Operations
Scanning photo
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the
(2) Press SEARCH MODE on the Remote Commander repeatedly until the
PHOTO SCAN indicator appears on the screen.
The indicator changes as follows:
DATE SEARCH
The indicator changes as follows:
DATE SEARCH
t PHOTO SEARCH t PHOTO SCAN t (no indicator)
(3) Press . or >.
Each photo is played back for about five seconds automatically.
To stop scanning
Press x.
If a tape has a blank portion between recorded portions
The photo search and photo scan function may not work correctly.
The photo search and photo scan function may not work correctly.
Searching for a photo – PHOTO SEARCH/PHOTO SCAN
3
2
SEARCH
MODE
PHOTO 00
SCAN
DCR-TRV250
94
Using the A/V connecting cable
You can dub or edit on the VCR connected to your camcorder using your camcorder as
a player.
a player.
Before operation
• Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
• Press the following buttons to make the indicators disappear so that they will not be
• Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
• Press the following buttons to make the indicators disappear so that they will not be
superimposed on the edited tape:
– DATA CODE on the Remote Commander
– DATA CODE on the Remote Commander
– SEARCH MODE on the Remote Commander
– DISPLAY
(1) Insert a tape for recording into the VCR, and insert the recorded tape into your
camcorder.
(2) Prepare the VCR for recording, then set the input selector to LINE.
Connect the A/V connecting cable to the AUDIO/VIDEO jack. Refer to the
operating instructions of your VCR.
operating instructions of your VCR.
(3) Set the POWER switch to VCR/PLAYER.*
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR.
— Editing —
Dubbing a tape
S VIDEO OUT
S VIDEO
AUDIO/
VIDEO
VIDEO
A/ V OUT
S VIDEO
VIDEO
AUDIO
IN
White
Red
Yellow
: Signal flow
A/V connecting cable
(supplied)
(supplied)
VCR
* Modes on the POWER switch vary depending on models (p. 16).
95
Editing
Dubbing a tape
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
To prevent deterioration of pictures when dubbing
Set EDIT to ON in the menu settings before dubbing. (The default setting is OFF.)
(p. 214)
(p. 214)
You can edit on VCRs that support the following systems:
8 mm , Hi8
8 mm , Hi8
, Digital8 , VHS
, S-VHS
, VHSC
, S-VHSC
,
Betamax , ED Betamax
, mini DV
, DV
, or MICRO MV
.
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR. When the white plug is
connected, the left channel audio is output, and when the red plug is connected, the
right channel audio is output.
white or the red plug to the audio input jack on the VCR. When the white plug is
connected, the left channel audio is output, and when the red plug is connected, the
right channel audio is output.
If your VCR is a stereo type
Connect the audio plug of the A/V connecting cable to the left (white) input jack of
your VCR.
your VCR.
If your VCR has an S video jack
Pictures can be reproduced more faithfully by using an S video cable (optional).
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
VCR.
Pictures can be reproduced more faithfully by using an S video cable (optional).
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
VCR.
S VIDEO
IN
VIDEO
AUDIO
S VIDEO OUT
A/ V OUT
: Signal flow
Yellow
Black
CCD-TRV418
A/V connecting cable
(supplied)
(supplied)
VCR
96
Using the i.LINK cable
Simply connect the i.LINK cable (optional) to DV on your camcorder and to DV IN on
the DV products. With a digital-to-digital connection, video and audio signals are
transmitted in digital form for high-quality editing. You cannot dub the screen
indicators.
the DV products. With a digital-to-digital connection, video and audio signals are
transmitted in digital form for high-quality editing. You cannot dub the screen
indicators.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Set the input selector on the VCR to DV IN if it is available. Refer to the
operating instructions of your VCR.
(3) Set the POWER switch to VCR on your camcorder.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR.
Dubbing a tape
DV
DV IN
DV
: Signal flow
i.LINK cable
(optional)
(optional)
is marked on
this side.
VCR
Click on the first or last page to see other DCR-TRV250 (serv.man3) service manuals if exist.