Sony DCR-TRV250 (serv.man3) Service Manual ▷ View online
105
Editing
Step 5: Performing Easy Dubbing
Make sure that your camcorder and VCR are connected, and that the VCR is set to
recording pause.
When you use a video camera recorder, set its power switch to VTR/VCR. Set the
POWER switch of your camcorder to PLAYER.
recording pause.
When you use a video camera recorder, set its power switch to VTR/VCR. Set the
POWER switch of your camcorder to PLAYER.
(1) Turn the SEL/PUSH EXEC dial to select START, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
When dubbing ends, your camcorder and VCR stop automatically.
Then the display returns to the Easy Dubbing initial screen.
Then the display returns to the Easy Dubbing initial screen.
To stop dubbing during editing
Press x on your camcorder.
Press x on your camcorder.
To quit Easy Dubbing
Press EASY DUB.
Press EASY DUB.
Note
If you set the background color to FADE in Step 3 (p. 103), the picture may not appear
properly depending on the connected VCR.
If you set the background color to FADE in Step 3 (p. 103), the picture may not appear
properly depending on the connected VCR.
You cannot record on the VCR when:
– The tape has run out.
– The write-protect tab is set to lock.
– The IR SETUP code is not correct.
– The button used to cancel recording pause is not correct.
– The tape has run out.
– The write-protect tab is set to lock.
– The IR SETUP code is not correct.
– The button used to cancel recording pause is not correct.
NOT READY appears on the screen when
START is not carried out.
START is not carried out.
Dubbing a tape easily – Easy Dubbing
106
You can duplicate selected scenes (programs) for editing onto a tape without operating
the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Your camcorder can dub on a “Memory Stick.” See page 156 for more information.
Before operation
Step 1 Connecting the VCR (p. 107)
Step 2 Setting the VCR for operation
Step 2 Setting the VCR for operation
– with the A/V connecting cable (p. 107 to 110)
– with the i.LINK cable (p. 111 to 112)
– with the i.LINK cable (p. 111 to 112)
Step 3 Adjusting the synchronization of the VCR (p. 113)
When you dub using the same VCR again, you can skip Step 2 (p. 107 to 112) and
Step 3 (p. 113 to 114).
When you dub using the same VCR again, you can skip Step 2 (p. 107 to 112) and
Step 3 (p. 113 to 114).
Using this function
Operation 1 Making a program (p. 115)
Operation 2 Performing the program (Dubbing a tape) (p. 118)
Operation 2 Performing the program (Dubbing a tape) (p. 118)
Note
Digital program editing does not work with tapes recorded in the Hi8
Digital program editing does not work with tapes recorded in the Hi8
/
standard 8 mm system.
Dubbing only desired scenes
– Digital program editing (on tapes)
– Digital program editing (on tapes)
Unwanted scene
Unwanted scene
Switch the order
107
Editing
Dubbing only desired scenes – Digital program editing (on tapes)
Step 1: Connecting the VCR
You can connect either an A/V connecting cable or an i.LINK cable.
When you use the A/V connecting cable, connect the devices as illustrated in page 94.
When you use the i.LINK cable, connect the devices as illustrated on page 96.
When you use the A/V connecting cable, connect the devices as illustrated in page 94.
When you use the i.LINK cable, connect the devices as illustrated on page 96.
If you connect using the i.LINK cable
With a digital-to-digital connection, video and audio signals are transmitted in digital
format for high-quality editing.
With a digital-to-digital connection, video and audio signals are transmitted in digital
format for high-quality editing.
Step 2: Setting the VCR for operation with the A/V connecting
cable
To edit using the VCR, set up your camcorder to send the control signal by infrared rays
to the remote sensor on the VCR.
When you connect using the A/V connecting cable, follow the procedure below, steps
(1) to (4), to send the control signal correctly.
to the remote sensor on the VCR.
When you connect using the A/V connecting cable, follow the procedure below, steps
(1) to (4), to send the control signal correctly.
(1) Set the IR SETUP code
1
Set the POWER switch to VCR on your camcorder.
2
Turn the power of the connected VCR on, then set the input selector to
LINE.
When you connect a video camera recorder, set its power switch to VCR/
VTR.
LINE.
When you connect a video camera recorder, set its power switch to VCR/
VTR.
3
Press MENU to display the menu settings.
4
Turn the SEL/PUSH EXEC dial to select
, then press the dial.
5
Turn the SEL/PUSH EXEC dial to select TAPE in VIDEO EDIT, then press
the dial.
the dial.
Turn the SEL/PUSH EXEC dial to select VIDEO EDIT, then press the dial.
6
Turn the SEL/PUSH EXEC dial to select EDIT SET, then press the dial.
7
Turn the SEL/PUSH EXEC dial to select CONTROL, then press the dial.
8
Turn the SEL/PUSH EXEC dial to select IR, then press the dial.
9
Turn the SEL/PUSH EXEC dial to select IR SETUP, then press the dial.
0
Turn the SEL/PUSH EXEC dial to select IR SETUP code number of your
VCR, then press the dial.
Check the code in “About the IR SETUP code” (p. 101).
VCR, then press the dial.
Check the code in “About the IR SETUP code” (p. 101).
108
Dubbing only desired scenes – Digital program editing (on tapes)
5
7
6
10
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
EDIT SET
MARK
UNDO
ERASE ALL
START
EDIT SET
IR
0:08:55:06
TOTAL 0:00:00:00
SCENE 0
SCENE 0
[MENU] : END
VIDEO EDIT
EDIT SET
CONTROL
ADJ TEST
”CUT–IN”
”CUT–OUT”
IR SETUP
PAUSEMODE
IR TEST
RETURN
EDIT SET
CONTROL
ADJ TEST
”CUT–IN”
”CUT–OUT”
IR SETUP
PAUSEMODE
IR TEST
RETURN
IR
i. LINK
i. LINK
0:08:55:06
[MENU] : END
VIDEO EDIT
EDIT SET
CONTROL
ADJ TEST
”CUT–IN”
”CUT–OUT”
IR SETUP
PAUSEMODE
IR TEST
RETURN
EDIT SET
CONTROL
ADJ TEST
”CUT–IN”
”CUT–OUT”
IR SETUP
PAUSEMODE
IR TEST
RETURN
3
0:08:55:06
[MENU] : END
OTHERS
DATA CODE
BEEP
COMMANDER
DISPLAY
VIDEO EDIT
RETURN
DATA CODE
BEEP
COMMANDER
DISPLAY
VIDEO EDIT
RETURN
READY
[MENU] : END
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
EDIT SET
MARK
UNDO
ERASE ALL
START
EDIT SET
1 IN
0:08:55:06
TOTAL 0:00:00:00
SCENE 0
SCENE 0
[MENU] : END
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
EDIT SET
MARK
UNDO
ERASE ALL
START
EDIT SET
1 IN
0:08:55:06
TOTAL 0:00:00:00
SCENE 0
SCENE 0
[MENU] : END
OTHERS
DATA CODE
BEEP
COMMANDER
DISPLAY
VIDEO EDIT
RETURN
DATA CODE
BEEP
COMMANDER
DISPLAY
VIDEO EDIT
RETURN
RETURN
TAPE
MEMORY
TAPE
MEMORY
[MENU] : END
1
MENU
Click on the first or last page to see other DCR-TRV250 (serv.man3) service manuals if exist.