DOWNLOAD Sony DCR-TRV10 / DCR-TRV10E / DCR-TRV8 / DCR-TRV8E (serv.man2) Service Manual ↓ Size: 35.38 MB | Pages: 127 in PDF or view online for FREE

5-23

Align the lens Optical Axis with the that of the CCD imager. If
deviated, center of picture can lose focus when zoom is operated
from the WIDE end to the TELE end.

Subject

Siemens star

Measurement Point

Check on the monitor TV

Measuring Instrument

Adjustment Page

F

Adjustment Address

43

Switch setting:
1)

NIGHT SHOT .................................................................. OFF

Preparations before adjustments:
1)

Playback the monoscope segment of the system check tape
(XH5-5 (NTSC), XH5-5P (PAL)).

2)

Attach the optical axis frame chart (transparent) on the monitor
TV screen. Center of monoscope image and that that of optical
axis frame must be agree.

3)

Set to the camera mode.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 6, address: 40, and set data: 02.

3)

Select page: 6, address: 41, and set data: 01.

4)

Select page: F, address: 43, set data: 00, and press the PAUSE
button of the adjustment remote commander.

5)

Place the Siemens star 2.0 m away from the front of the lens.

6)

Shoot the Siemens star with the zoom TELE end.

7)

Point the lens toward the Siemens star chart until center of the
Siemens star is located in the center of the optical axis frame.

8)

Shoot the Siemens star with the zoom WIDE end.

9)

Measure on the monitor TV screen in which area of the optical
axis frame the center of the Siemens star is located. Measure
the amount of displacement (distance between the center of
the Siemens star and the center of the optical axis frame.) The
measurement value is named L1.

10) Read the correction data corresponding to the area from the

following table.

11) Set the correction data to page: F, address: 43 and press the

PAUSE button.

12) Shoot the Siemens star with the zoom TELE end.
13) Point the lens toward the Siemens star chart until center of the

Siemens star is located in the center of the optical axis frame.

14) Shoot the Siemens star with the zoom WIDE end.
15) Measure the amount of displacement (distance between the

center of the Siemens star and the center of the optical axis
frame.) The measurement value is named L2.

16) Compare the values L1 and L2, and confirm that L2 is smaller

than L1. If L2 is lager than L1, select page F, address 43 and
set data: 00, and press the PAUSE button.

Processing after Completing Adjustments:
1)

Select page: 0, address: 01, and set data: 00.

2)

Select page: 6, address: 40, and set data: 00.

3)

Select page: 6, address: 41, and set data: 00.

Fig. 5-1-7.

1

2

3

4

5

6

7

8

22.6

°

 to 67.5

°

67.6

°

 to 112.5

°

112.6

°

 to 157.5

°

157.6

°

 to 202.5

°

202.6

°

 to 247.5

°

247.6

°

 to 292.5

°

292.6

°

 to 337.5

°

337.6

°

 to 22.5

°

01

02

03

04

05

06

07

08

5-24

Subject

Color bar chart
(Color reproduction adjustment
frame)
(1.5m from the front of the lens)

Measurement Point

Video output terminal

Measuring Instrument

Oscilloscope and TV monitor

Specified Value

A=B, C=D, E=F

Switch setting:
1)

NIGHT SHOT .................................................................. OFF

2)

DIGITAL ZOOM (Menu display) ................................... OFF

Setting method:
1)

Adjust the zoom and the camera direction, and set to the
specified position.

2)

Mark the position of the picture frame on the monitor display,
and adjust the picture frame to this position in following
adjustments using “Color reproduction adjustment frame”.

Subject

Clear chart
(Color reproduction adjustment
frame)

Measurement Point

Display data of page 1 (Note)

Measuring Instrument

Adjustment remote commander

Adjustment Page

E

Adjustment Address

3A, 3B, 3C, 3D

Specified Value

Data1  : 0196 to 02D3
Data2  : 0B35 to 1669

 Displayed data of page 1 of the adjustment remote commander.

1 : XX : XX

Display data

Switch setting:
1)

NIGHT SHOT .................................................................. OFF

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 6, address: 40, and set data: 02.

3)

Select page: 6, address: 41, and set data: 01.

4)

Select page: 6, address: 01, set data: 71, and press the PAUSE
button of the adjustment remote commander.
(The AGC gain calibration adjustment is performed and the
adjustment data is stored in page: E, address: 3A to 3D.)

5)

Select page: 6, address: 02, and check that the data is “01”.

6)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

Checking method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: F, address: 10, set data: 47, and press the PAUSE
button.

3)

Select page: 6, address: 9A, and set data: 03.

4)

Select page: 6, address: 01, set data: 9B, and press the PAUSE
button.

5)

Select page: 6, address: 02, and check that the data is “01”.

6)

Select page: 1, and check that the display data (Note) satisfies
the specified value of data1.

7)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

8)

Select page: 6, address: 9A, and set data: 99.

9)

Select page: 6, address: 01, set data: 9B, and press the PAUSE
button.

10) Select page: 6, address: 02, and check that the data is “01”.
11) Select page: 1, and check that the display data (Note) satisfies

the specified value of data2.

Processing after Completing Adjustments:
1)

Select page: F, address: 10, set data: 00, and press the PAUSE
button.

2)

Select page: 6, address: 01, and set data: 00, and press the
PAUSE button.

3)

Select page: 6, address: 40, and set data: 00.

4)

Select page: 6, address: 41, and set data: 00.

5)

Select page: 6, address: 9A, and set data: 00.

6)

Select page: 0, address: 01, and set data: 00.

A=B

C=D

A

B

C

D

E=F

V

E

F

Color bar chart picture frame

Monitor TV picture frame

Fig. 5-1-8.

Fig. 5-1-9.

Fig. 5-1-10.

5-25

Adjust the color Separation matrix coefficient so that proper color
reproduction is produced.

Subject

Color bar chart (Color reproduction
adjustment frame)

Measurement Point

Video output terminal

Measuring Instrument

Vectorscope

Adjustment Page

F

Adjustment Address

2E, 30, 44, 45

Specified Value

All color luminance points should
settle within each color reproduction
frame.

NTSC model: DCR-TRV8/TRV10
PAL model: DCR-TRV8E/TRV10E

Switch setting:
1)

NIGHT SHOT ................................................................. OFF

2)

STEADY SHOT (Menu display) .................................... OFF

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: F, address: 5E, set data: 29, and press the PAUSE
button of the adjustment remote commander.

3)

Select page: F, address: 16, set data: 37 (NTSC) or B7 (PAL),
and press the PAUSE button.

4)

Select page: 6, address: 01, set data: 3D, and press the PAUSE
button.

5)

Adjust the GAIN and PHASE of the vectorscope, and adjust
the burst luminance point to the burst position of the color
reproduction frame.

6)

Change the data of page: F, address: 2E, 30, 44 and 45, and
settle each color luminance point in each color reproduction
frame.

Be sure to press the PAUSE button of the adjustment remote
commander before changing the addresses. If not, the new data
will not be written to the memory.

Processing after Completing Adjustments:
1)

Select page: F, address: 5E, set data: 2E, and press the PAUSE
button of the adjustment remote commander.

2)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

3)

Select page: 0, address: 01, and set data: 00.

Setting the minimum illumination.
If it is not consistent, the image level required for taking subjects in
low illuminance will not be produced (dark).

Subject

Clear chart
(Color reproduction adjustment
frame)

Adjustment Page

F

Adjustment Address

2C

Switch setting:
1)

NIGHT SHOT .................................................................. OFF

2)

STEADY SHOT (Menu display) ..................................... OFF

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 6, address: 96, and set data: 00.

3)

Select page: 6, address: 97, and set data: 27.

4)

Select page: 6, address: 01, set data: 6F, and press the PAUSE
button of the adjustment remote commander.
(The MAX GAIN adjustment is performed and the adjustment
data is stored in page: F, address: 2C.)

5)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

2)

Select page: 6, address: 97, and set data: 00.

3)

Select page: 0, address: 01, and set data: 00.

Fig. 5-1-11.

Burst postion

Burst postion

5-26

Subject

Clear chart
(Color reproduction adjustment
frame)

Adjustment Page

F

Adjustment Address

20 to 23, 3E, 3F

This adjustment should be carried out upon completion of “Color
Reproduction Adjustment”.

Check that the data of page: 6, address: 02 is “00”. If not, select
page: 6, address: 01, set data: 00, and press the PAUSE button of
the adjustment remote commander.

Switch setting:
1)

NIGHT SHOT .................................................................. OFF

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjustment remote commander.

3)

Select page: 6, address: 01, set data: 0D, and press the PAUSE
button.
(When the standard data is take in, the data will be automatically
input to page: F, address: 20 to 23, 3E, 3F.)

4)

Select page: 6, address: 02, and check that the data is “01”.

5)

Perform “Auto White Balance Adjustment”.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjustment remote commander.

2)

Select page: 0, address: 01, and set data: 00.

Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility will
be poor.

Subject

Clear chart (Color reproduction
adjustment frame)

Filter

Filter C14 for color temperature
correction

Measurement Point

Display data of page 1 (Note2)

Measuring Instrument

Adjustment remote commander

Adjustment Page

F

Adjustment Address

34, 35

Specified Value

R ratio: 2D40 to 2DC0
B ratio: 5B40 to 5BC0

Perform “Auto White Balance & LV Standard Data Input” before
this adjustment.

Displayed data of page 1 of the adjustment remote commander.

1 : XX : XX

Display data

Switch setting:
1)

NIGHT SHOT .................................................................. OFF

Adjusting method:
1)

Place the C14 filter for color temperature correction on the
lens.

2)

Select page: 0, address: 01, and set data: 01.

3)

Select page: F, address: 48 to 4B, and note down the data of
each address.

4)

Input the following data to page: F, addresses: 48 to 4B.

Press the PAUSE button of the adjustment remote commander
each time to set the data.

5)

Select page: 6, address: 01, set data: 83, and press the PAUSE
button.

6)

Select page: 6, address: 01, set data: 81, and press the PAUSE
button.
(The auto white balance adjustment is performed and the
adjustment data is stored in page: F, address: 34 and 35.)

7)

Select page: 6, address: 02, and check that the data is “01”.

8)

Select page: 6, address: 01, set data: 3F, and press the PAUSE
button.

9)

Select page: 6, address: 04, and set data: 04.

10) Select page: 1, and check that the display data (Note2) satisfies

the R ratio specified value.

11) Select page: 6, address: 04, and set data: 05.
12) Select page: 1, and check that the display data (Note2) satisfies

the B ratio specified value.

13) Select page: F, address: 48 to 4B, and input the data noted down

at step 3).

After setting each data, be sure to press the PAUSE button of
the adjustment remote commander.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

2)

Select page: 6, address: 04, and set data: 00.

3)

Select page: 0, address: 01, and set data: 00.

48

2D

49

80

4A

5B

4B

80