DOWNLOAD Sony DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) Service Manual ↓ Size: 662.66 KB | Pages: 54 in PDF or view online for FREE

6-31

DCR-SR30E/SR40/SR40E_ADJ

6) After setting the picture frame, if the 

[End]

 button is clicked,

“4. Color Reproduction Adj.” is executed. The following mes-
sage is displayed, and then adjust the burst position of the
vectorscope.

7) If the 

[OK]

  button is clicked, the following message is dis-

played, and then adjust the luminance point of each color us-
ing the 

[Up]

/

[Down]

  button on the screen. After the adjust-

ment finished, click the 

[End]

 button.

8) After the adjustment, if the 

[End]

 button is clicked, the fol-

lowing messages are displayed in the order given below. Then,
change the chart in accordance with the message.

9) After the setting, if the 

[OK]

 button is clicked, the adjustment

items “5. AWB Standard Data Input” and “6. LV Standard Data
Input” are executed.

10) Upon successful completion of the “6. LV Standard Data In-

put”, the following message is displayed during the execution
of “7. AWB Adj.”. During the execution, the following mes-
sages are displayed in the order given below. Place or remove
the filters on the lens in accordance with the messages.

Burst position

R-Y

B-Y

R

B

G

M

G

Y

E

C

Y

Burst position

R-Y

B-Y

R

B

G

M

G

Y

E

C

Y

6-32

DCR-SR30E/SR40/SR40E_ADJ

11) Upon successful completion of the “7. AWB Adj.”, the follow-

ing message is displayed during the execution of “8. AWB
Check”. During the execution, the following messages and
screens are displayed in the order given below. Place or re-
move the filters on the lens in accordance with the messages,
and check that the luminance point settles in the circle.

12) Upon completion of “8. AWB Check”, the following message

is displayed during the execution of “9. Picture Frame Setting
(Center Frame)”. Set the subject in accordance with the mes-
sage, and then check the size of clear chart shot on the monitor
screen.

13) After the checking, if the 

[OK]

 button in the message window

is clicked, “10. MAX GAIN Adj.” is executed.

14) Upon successful completion of the “10. MAX GAIN Adj.”,

“11. Release of Data Setting during Camera Adj.” is executed.

15) Upon successful completion of all items of the CAMERA

Adjustment 4, the following message is displayed. Click the

[OK]

 button.

6-33

DCR-SR30E/SR40/SR40E_ADJ

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Steady Shot Check
3. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the 

[Start]

 button of the CAMERA Adjustment 5.

2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) Upon successful completion of the “1. Data Setting during

Camera Adj.”, the following message is displayed.
With the camcoder in stationary state, click the 

[OK]

 button.

4) If the 

[OK]

 button is clicked, “2. Steady Shot Check” is ex-

ecuted.
Upon successful completion of the “2. Steady Shot Check”,
the following message is displayed. Check that the steadyshot
function operates normally in accordance with the message.

5) If the 

[OK]

 button is clicked, “3. Release of Data Setting dur-

ing Camera Adj.” is executed.

6) Upon successful completion of all items of the CAMERA

Adjustment 5, the following message is displayed. Click the

[OK]

 button.

6-34

DCR-SR30E/SR40/SR40E_ADJ

Click the 

[LCD SYSTEM ADJUSTMENT]

 button on the Main

Menu screen, and the “LCD SYSTEM ADJUSTMENT” screen
in Fig. 6-1-14 will appear.

1

[To Menu]

 button

The Main Menu screen comes back.

2

Model Select radio button
Selects the model to be adjusted.

NTSC model: DCR-SR40
PAL model: DCR-SR30E/SR40E

3

[Start]

 button

Each adjustment “LCD adjustment” or “Touch Panel Adjust-
ment” starts.

4

[Release Data Setting]

 button

The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the LCD adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)

The adjustment items of LCD system adjustment are as listed in
Table 6-1-4. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.

VCO Adj. (LCD)

0C

50, 51

Contrast Adj. (LCD)

0C

58

V-COM Adj. (LCD)

0C

52

0C

56, 57

Transmissive Mode White
Balance Adj. (LCD)

Touch Panel Adj.

0A

90 to 93

LCD
Adjustment

Touch Panel
Adjustment

4

2

3

1