DOWNLOAD Sony DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) Service Manual ↓ Size: 662.66 KB | Pages: 54 in PDF or view online for FREE

6-23

DCR-SR30E/SR40/SR40E_ADJ

4) After that, the following screen is displayed during the execu-

tion of “3. S VIDEO OUT Chroma Level Adj.”. Using the 

[Up]

/ 

[Down]

  button on the screen, adjust so that the Cr signal

level and the Cb signal level satisfies the specified value. After
the adjustment, check that the burst level of the chroma sig-
nals satisfies the specified value, and click the 

[End]

 button in

the screen.

5) If the 

[End]

 button is clicked, “4. VIDEO OUT Level Check”

will be executed. The following message and screen are dis-
played. Check that the sync signal level and burst level of the
video signals satisfies the specified value, and click the 

[OK]

button in the message.

6) If the [OK] button is clicked, “5. Release of Data Setting dur-

ing Video Adj.” will be executed.

7) Upon successful completion of all item the VIDEO Adjust-

ment, the following message is displayed. Click the 

[OK]

 but-

ton.

6-24

DCR-SR30E/SR40/SR40E_ADJ

Click the 

[CAMERA SYSTEM ADJUSTMENT]

 button on the Main

Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-10 will appear.

1

[To Menu]

 button

The Main Menu screen comes back.

2

[Preparation]

 button

Notes for adjustment or jigs used are displayed.

3

[Start]

 button

Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 5” starts.

4

Model Select radio button
Selects the model to be adjusted.

NTSC model: DCR-SR40
PAL model: DCR-SR30E/SR40E

5

[Release Data Setting]

 button

The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)

5

4

3

2

1

2

3

3

6-25

DCR-SR30E/SR40/SR40E_ADJ

The adjustment items of camera system adjustment are as listed in
Table 6-1-3. The Automatic Adjustment Program divides the ad-
justment items into five, camera adjustment 1-5. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.

CAMERA
Adjustment 1

HALL Adj.

Not required

0F

12 to 18

Siemens star chart with ND filter for
minipattern box (Note 1) or
Flange back adjustment jig

Flange back adjustment chart and
subject more than 500 m away

CAMERA
Adjustment 3

Flange Back Check

Siemens star chart

–

–

F No. Standard Data Input

0F

1C to 23

Color Reproduction Adj.

0F

33, 35, 3A, 3B

LV Standard Data Input

0F

1A, 1B

AWB Check

Clear chart
(Color reproduction adjustment frame)
ND filter 1.0, 0.4 and 0.1

–

–

MAX GAIN Adj.

Clear chart
(Center frame)

0F

19

CAMERA
Adjustment 5

Steady Shot Check

Not required

–

–

0F

2A to 2D

Color bar chart
(Color reproduction adjustment frame)

0F

2E to 31, 3E to 41

AWB Adj.

Clear chart
(Color reproduction adjustment frame)
Filter C14 for color temperature
correction

0F

44 to 55

CAMERA
Adjustment 4

Clear chart
(Color reproduction adjustment frame)

AWB Standard Data Input

Not required

Flange Back Adj.

CAMERA
Adjustment 2

Dark Siemens star chart.

6-26

DCR-SR30E/SR40/SR40E_ADJ

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. HALL Adj.
3. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the 

[Start]

 button of the CAMERA Adjustment 1.

2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) If “1. Data Setting during Camera Adj.” completed success-

fully, and the items “2. HALL Adj.” and “3. Release of Data
Setting during Camera Adj.” will be executed.

4) Upon successful completion of all items of the CAMERA

Adjustment 1, the following message is displayed. Click the

[OK]

 button.