Sony DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) Service Manual ▷ View online
6-47
DCR-SR30E/SR40/SR40E_ADJ
5.
Switch Check (2)
Page 7
Address 96 and 98
Note:
Check that the data of page: 0, address: 10 is “00”.
Using method:
1) Select page: 7, address: 96 and 98.
2) By discriminating the display data, the pressed key can be dis-
1) Select page: 7, address: 96 and 98.
2) By discriminating the display data, the pressed key can be dis-
criminated.
Address
96
(KEY AD1)
(IC2301 <
(IC2301 <
A27
)
98
(KEY AD3)
(IC2301 <
(IC2301 <
B27
)
00 to 0C
REC
START/STOP
(SB9000 block)
(SB9000 block)
(S001)
DVD BURN
(Cradle)
0D to 26
ZOOM W
(SB9000 block)
(S003)
EASY
(CK-166 board)
(S7305)
27 to 43
ZOOM T
(SB9000 block)
(S002)
BACK LIGHT
(CK-166 board)
(S7302)
44 to 63
64 to 8A
PANEL
CLOSE
CLOSE
(CK-166 board)
(S7304)
8B to B2
B3 to E1
E2 to FF
No key input
PANEL
OPEN
(CK-166 board)
(S7304)
Data
6.
G Sensor Check
Page 7
Address 95, 97, 99 to 9B
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Using method:
1) Place the camcorder in horizontal state.
2) Select page: 7, address: 95, 97 and 99 to 9B.
3) Read the displayed data and check that the data values are
1) Place the camcorder in horizontal state.
2) Select page: 7, address: 95, 97 and 99 to 9B.
3) Read the displayed data and check that the data values are
within respective specified values.
Note 2:
For the address: 99 to 9B, the data values will vary de-
pending on how the camcorder is placed.
If the data values are out of the specified ranges, re-place
the camcorder correctly up to three times and if even
once the data values are within the specified values, the
sensor is normal.
pending on how the camcorder is placed.
If the data values are out of the specified ranges, re-place
the camcorder correctly up to three times and if even
once the data values are within the specified values, the
sensor is normal.
Address
95
97
99
9A
9B
Function
Data
(Specified value)
GSENS-REF (VC-466 board SE981)
70 to 8F
GSENS-TEMP (VC-466 board SE981)
68 to AE
GSENS-X (VC-466 board SE981)
58 to 69 (Note 2)
GSENS-Y (VC-466 board SE981)
76 to 86 (Note 2)
GSENS-Z (VC-466 board SE981)
76 to 86 (Note 2)
6-48
DCR-SR30E/SR40/SR40E_ADJ
7.
Jack Check (1)
Page 7
Address F3
Note:
Check that the data of page: 0, address: 10 is “00”.
Using method:
1) Select page: 7, address: F3.
2) By discriminating the bit value of display data, the state of
1) Select page: 7, address: F3.
2) By discriminating the bit value of display data, the state of
jack can be discriminated.
Bit
Function
When bit value = 1
When bit value = 0
0
Multi jack
Used
Not used
1
2
Multi jack (S VIDEO)
Used
Not used
3
Multi jack (VIDEO)
Used
Not used
4
Multi jack (AUDIO)
Used
Not used
5
6
Function
When data = 40
When data = 00
USB jack
Used (Note 2)
Not used
8.
Jack Check (2)
Page 7
Address E9
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
A personal computer must be connected to the USB jack.
Using method:
1) Select page: 7, address: E9.
2) By discriminating the read data, the state of jack can be dis-
1) Select page: 7, address: E9.
2) By discriminating the read data, the state of jack can be dis-
criminated.
9.
LED Check
Page 7
Address 00, 01 and 04
Note:
Check that the data of page: 0, address: 10 is “00”.
Using method:
Order Page Address Data
Procedure
1
7
01
90
2
7
04
01
3
7
00
01
Press PAUSE (Write) button.
4
Check that the all LED are
lit, except access LED.
lit, except access LED.
5
7
01
90
6
7
04
00
7
7
00
01
Press PAUSE (Write) button.
8
7
00
00
9
7
01
00
6-49
DCR-SR30E/SR40/SR40E_ADJ
10. Record Data Check
10-1. Record of Use Check
10-1. Record of Use Check
Page 7
Address C8 to CA
Note 1:
This data will not be erased (reset) when the lithium 3 V
power supply (CK-166 board BT7301) is removed.
power supply (CK-166 board BT7301) is removed.
Note 2:
Check that the data of page: 0, address 10 is “00”.
Using method:
1) The record of use data is displayed at page: 7, addresses: C8 to
1) The record of use data is displayed at page: 7, addresses: C8 to
CA.
Address
Remark
C8
Year
C9
Month
CA
Day
After setting the clock, set the date of power on next
Function
User initial power
on date
(BCD code)
on date
(BCD code)
6-50
DCR-SR30E/SR40/SR40E_ADJ
Address
B0
B1
B2
B4
B5
B6
B8
B9
BA
BC
BD
BE
C0
C1
C2
C4
C5
C6
Self-diagnosis code
“Repaired by” code (Occurred 1st time) *1
“Block function” code (Occurred 1st time)
“Detailed” code (Occurred 1st time)
“Repaired by” code (Occurred 2nd time) *1
“Block function” code (Occurred 2nd time)
“Detailed” code (Occurred 2nd time)
“Repaired by” code (Occurred 3rd time) *1
“Block function” code (Occurred 3rd time)
“Detailed” code (Occurred 3rd time)
“Repaired by” code (Occurred 4th time) *1
“Block function” code (Occurred 4th time)
“Detailed” code (Occurred 4th time)
“Repaired by” code (Occurred 5th time) *1
“Block function” code (Occurred 5th time)
“Detailed” code (Occurred 5th time)
“Repaired by” code (Occurred the last time) *1
“Block function” code (Occurred the last time)
“Detailed” code (Occurred the last time)
10-2. Record of Self-diagnosis Check
Page 7
Address B0 to C6
Note 1:
This data will not be erased (reset) when the lithium 3 V
power supply (CK-166 board BT7301) is removed.
Note 2:
Check that the data of page: 0, address 10 is “00”.
*1 : “01”
t “C”, “03” t “E”
Using method:
1) The past self-diagnosis codes are displayed at page: 7, ad-
1) The past self-diagnosis codes are displayed at page: 7, ad-
dress: BC to C6. Refer to “SELF-DIAGNOSIS FUNCTION”
of “SERVICE MANUAL, LEVEL 2” for detail of the self-
diagnosis code except for the code being written in the fol-
lowing table.
of “SERVICE MANUAL, LEVEL 2” for detail of the self-
diagnosis code except for the code being written in the fol-
lowing table.
Self-diagnosis Code
Repaired by:
E
E
E
Block
Function
Function
20
94
94
Detailed
Code
Code
00
00
01
Symptom/State
Data on A page or D page are
rewritten.
rewritten.
Fault of writing to or erasing the
flash memory.
flash memory.
Fault of writing to or erasing the
EEPROM.
EEPROM.
Correction
Make data on A page and D
page correct value.
page correct value.
Inspect the flash memory
(VC-466 board IC2401)
(VC-466 board IC2401)
Replacing EEPROM
(VC-466 board IC2303)
(VC-466 board IC2303)
Note:
When the fault of writing to or erasing the flash memory
(E: 94: 00) or EEPROM (E: 94: 01) is displayed.
After repair, perform “Initialization of Flash Backup infor-
mation”.
(See Page 6-20)
(E: 94: 00) or EEPROM (E: 94: 01) is displayed.
After repair, perform “Initialization of Flash Backup infor-
mation”.
(See Page 6-20)
Click on the first or last page to see other DCR-SR30E / DCR-SR40 / DCR-SR40E (serv.man4) service manuals if exist.