DOWNLOAD Sony DCR-SR100 / DCR-SR100E / DCR-SR90E (serv.man4) Service Manual ↓ Size: 1.11 MB | Pages: 66 in PDF or view online for FREE

6-23

DCR-SR90E/SR100/SR100E_ADJ

The DCR-SR90E/SR100/SR100E are adjusted by the Automatic
Adjustment Program. The Automatic Adjustment Program enters
automatically via the SeusCam the adjustment operations that were
formerly entered manually by the adjustment remote commander
(some items may be adjusted by manual operation on the opera-
tion screen of the SeusCam).

1) The Automatic Adjustment Program writes the adjustment re-

sults such as EVR data to the set through two-way communi-
cation with the camera via the SeusCam. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusCam operates.

2) The Automatic Adjustment Program cannot be used when the

SEUS (digital camera adjustment software) is running. Exit
the SEUS before using the Automatic Adjustment Program.

3) The SeusCam must be already started on the PC when using

the Automatic Adjustment Program. With the SeusCam not
started, some adjustment items will take time in adjustment.

4) The program run time may vary depending on the environ-

ment of the personal computer used.

Note: Before using the Automatic Adjustment Program, set the

following data using the adjustment remote commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 01, and press the

PAUSE (Write) button.

These settings are released if the [END] button is clicked
on the Main Menu screen of the Automatic Adjustment Pro-
gram.

Double-click the application file (DCR-SR100 Series Auto-Adj
Ver_1.0r01.exe), and the Automatic Adjustment Program will start.

When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-9 will appear. On this screen, select each adjust-
ment section.

1

[Connecting the Equipment] button
A connection diagram of the equipment is displayed.

2

[Initialization of Information Data] button
The “Initialization of Information Data” screen appears.

3

[VIDEO SYSTEM ADJUSTMENT] button
The “VIDEO SYSTEM ADJUSTMENT” screen appears.

4

[CAMERA SYSTEM ADJUSTMENT] button
The “CAMERA SYSTEM ADJUSTMENT” screen appears.

5

[LCD SYSTEM ADJUSTMENT] button
The “LCD SYSTEM ADJUSTMENT” screen appears.

6

[AUDIO SYSTEM ADJUSTMENT] button
The “AUDIO SYSTEM ADJUSTMENT” screen appears.

7

[END] button
The Automatic Adjustment Program finishes.
At this time, the data set by the adjustment remote commander
are released.
If the data are not released with the [END] button, release them
through the following procedure using the adjustment remote
commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 00, and press the

PAUSE (Write) button.

3) Select page: 0, address: 01, and set data: 00.

8

This part indicates the version of Automatic Adjustment Pro-
gram.

7

4

3

2

1

5

6

8

6-24

DCR-SR90E/SR100/SR100E_ADJ

If HDD is replaced, perform work following the procedure given
below.

[HDD replacement procedure]
1) Connect the adjustment remote commander to the camcorder

before HDD adjustment, and turn on the power of the
camcorder.

2) Select page: 0, address: 01, and set data: 01.
3) Select page: 9, address: 08, and set data: 01, then press the

PAUSE (Write) button.

4) Select page: 9, address: 10, and set data: 01, then press the

PAUSE (Write) button.

5) Select page: 0, address: 01, and set data: 00.
6) Turn off the power of the camcorder.
7) Replace the HDD.
8) Turning on the power of the camcorder will start automatic

HDD check. During the execution of HDD check, the color
bar is displayed on the LCD screen as shown below.

Note: Do not vibrate the camcorder or give a shock to it during

the execution of HDD check.

9) Upon successful completion of HDD check, the following

screen will appear. Select “Yes” on the touch panel and wait
for the completion of processing. (If the processing is com-
pleted, normal screen will be restored.)

10) Select page: 0, address: 01, and set data: 01.
11) Select page: 9, address: 10, and check that the data is “00”.
12) Select page: 9, address: 08, and set data: 00, then press the

PAUSE (Write) button.

13) Select page: A, address: 14, and set data: 01, then press the

PAUSE (Write) button.

14) Connect the PC and camcorder with the USB cable.
15) Perform “Initialization of Flash Backup Information”. (See

Page 6-25)

6-25

DCR-SR90E/SR100/SR100E_ADJ

2. Initialization of Flash Backup Information
• When HDD is replaced, perform “Initialization of Flash Backup

Information” after replacement. (See HDD replacement proce-
dure)

• When the self diagnostic code E:94:00 or E:94:01 is displayed,

perform “Initialization of Flash Backup Information” after re-
pair.

[Initializing method]
1) Click the [Start] button of the Initialization of Flash Backup

Information.

2) The initialization finishes when the following message is dis-

played.

Click the [Initialization of Information Data] button on the Main Menu
screen, and the “Initialization of Information Data” screen in Fig.
6-1-10 will appear.

1

[To Menu] button
The Main Menu screen comes back.

2

[Start] button
“Initialization of Flash Backup Information” or “Initialization
of AV Index Information”

 starts.

2

1

6-26

DCR-SR90E/SR100/SR100E_ADJ

3. Initialization of AV Index Information
When the following parts are replaced, perform “Initialization of
AV Index Information” after replacement.
• VC-449 board

• IC2303 (EEPROM) on the VC-449 board

[Initializing method]
1) Click the [Start] button of the Initialization of AV Index Infor-

mation.

2) The initialization finishes when the following message is dis-

played.