Sony DCR-SR100 / DCR-SR100E / DCR-SR90E (serv.man4) Service Manual ▷ View online
6-11
DCR-SR90E/SR100/SR100E_ADJ
1-2.
INITIALIZATION OF 9, A, B, C, D, E, F, 13, 14,
15, 17, 19, 1A, 1B, 1C, 1E, 1F PAGE DATA
15, 17, 19, 1A, 1B, 1C, 1E, 1F PAGE DATA
Note 1: If reading/writing data on pages 13, 14, 15, 17, 19, 1A,
1B, 1C, 1E, 1F, set data: 01 to page: 0, address: 10, and
then select pages: 3, 4, 5, 7, 9, A, B, C, E, F.
By this data setting, the pages 13, 14, 15,17, 19, 1A, 1B,
1C, 1E, 1F, can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
then select pages: 3, 4, 5, 7, 9, A, B, C, E, F.
By this data setting, the pages 13, 14, 15,17, 19, 1A, 1B,
1C, 1E, 1F, can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
1-2-1.
Initialization of 9, A, B, D, 13, 15, 17, 1A, 1B Page
Data
Data
Note: Check that the data of page: 0, address: 10 is “00”.
1.
Initializing of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data
Note 1: If the 9, A, B, D, 13, 15, 17, 1A, 1B page data has been
initialized, the following adjustments need to be per-
formed again.
1) Modification of 9, A, B, D, 13, 15, 17, 1A, 1B page data
2) Touch Panel adjustment
3) Audio system adjustment
formed again.
1) Modification of 9, A, B, D, 13, 15, 17, 1A, 1B page data
2) Touch Panel adjustment
3) Audio system adjustment
Note 2: NTSC model: DCR-SR100
PAL model: DCR-SR90E/SR100E
Adjustment Page
9
Adjustment Address
00 to FF
Adjustment Page
A
Adjustment Address
10 to FF
Adjustment Page
B
Adjustment Address
00 to FF
Adjustment Page
D
Adjustment Address
10 to 7F
Adjustment Page
13
Adjustment Address
00 to FF
Adjustment Page
15
Adjustment Address
00 to FF
Adjustment Page
17
Adjustment Address
00 to FF
Adjustment Page
1A
Adjustment Address
00 to FF
Adjustment Page
1B
Adjustment Address
00 to FF
Initializing method:
Order Page Address Data
Procedure
1
0
01
01
2
0
10
00
Set the following data
20: Initializing A page
21: Initializing B page
22: Initializing D page
23: Initializing 1A page
24: Initializing 1B page
25: Initializing A and 1A
21: Initializing B page
22: Initializing D page
23: Initializing 1A page
24: Initializing 1B page
25: Initializing A and 1A
page
3
7
01
26: Initializing B and 1B
page
28: Initializing 9 page
29: Initializing 15 page
2A: Initializing 17 page
2B: Initializing 13 page
2E: Initializing 9, A, B, D,
13, 15, 17, 1A and 1B
page
page
Set the following data
4
7
04
20: NTSC model
21: PAL model
21: PAL model
5
7
05
00
Press PAUSE (Write) button.
6
7
00
01
Press PAUSE (Write) button.
7
7
02
Check the data changes to
“01”.
“01”.
Perform “Modification of 9,
8
A, B, D, 13, 15, 17, 1A, 1B
Page Data”
Page Data”
6-12
DCR-SR90E/SR100/SR100E_ADJ
2.
Modification of 9, A, B, D, 13, 15, 17, 1A, 1B Page
Data
Data
If the 9, A, B, D, 13, 15, 17, 1A, 1B page data has been initialized,
change the data of the “Fixed data-2” address shown in the fol-
lowing table by manual input.
change the data of the “Fixed data-2” address shown in the fol-
lowing table by manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) If modification of data on pages 9, A, B, D, set data: 00 to
page: 0, address: 10, and then select pages 9, A, B, D.
3) If modification of data on pages 13, 15, 17, 1A, 1B, set data:
01 to page: 0, address: 10, and then select pages 3, 5, 7, A, B.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
4) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note 1: If copy the data built in the different model, the
the data built in the same model.
Note 1: If copy the data built in the different model, the
camcorder may not operate.
5) When changing the data, press the PAUSE (Write) button of
the adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
data to write the data in the non-volatile memory.
6) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification 9, A, B, D, 13, 15,
17, 1A, 1B page data:
17, 1A, 1B page data:
Order Page Address Data
Procedure
1
0
10
00
2
2
00
29
3
2
01
29
Press PAUSE (Write) button.
Note 2: This operation should be done with the adjustment re-
mote commander. The operation of page: 02 cannot be
performed with the SeusCam.
performed with the SeusCam.
Note 3: If following symptoms occur after completing of the
“Modification 9, A, B, D, 13, 15, 17, 1A, 1B page data”,
check that the data of the “Fixed data-2” address of 9, A,
B, D, 13, 15, 17, 1A, 1B page are same as those of same
model of same destination.
1) The power is shut off so that unit cannot operate.
check that the data of the “Fixed data-2” address of 9, A,
B, D, 13, 15, 17, 1A, 1B page are same as those of same
model of same destination.
1) The power is shut off so that unit cannot operate.
3.
9 Page table
Note 1: Check that the data of page: 0, address: 10 is“00”.
Note 2: Fixed data-1: Initialized data. (Refer to“1. Initializing the
Note 2: Fixed data-1: Initialized data. (Refer to“1. Initializing the
9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to“2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to“2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
6-13
DCR-SR90E/SR100/SR100E_ADJ
5.
B Page table
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 1A, 13, 15, 17, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 0B
Fixed data-1 (Initialized data)
0C
00
00
0D
00
00
0E
00
00
Internal 4ch microphone sensitivity adj.
0F
00
00
10 to FF
Fixed data-1 (Initialized data)
4.
A Page table
Note 1: Check that the data of page: 0, address: 10 is“00”.
Note 2: Fixed data-1: Initialized data. (Refer to“1. Initializing the
Note 2: Fixed data-1: Initialized data. (Refer to“1. Initializing the
9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to“2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to“2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
10
00
00
Test mode
11 to 4C
Fixed data-1 (Initialized data)
4D
Fixed data-2
4E to 5F
Fixed data-1 (Initialized data)
60
61
62
Fixed data-2
63
64 to 8F
Fixed data-1 (Initialized data)
90
E7
EA
91
13
10
92
CD
C1
Touch panel adj.
93
23
1C
94 to 9F
Fixed data-1 (Initialized data)
A0
A1
A2
A3
A4
A5
A6
Fixed data-2
A7
A8
A9
AA
AB
AC
AD to B5
Fixed data-1 (Initialized data)
B6
B7
B8
Fixed data-2
B9
BA to DF
Fixed data-1 (Initialized data)
E0
Fixed data-2
E1
Fixed data-1 (Initialized data)
E2
Fixed data-2
E3
Fixed data-1 (Initialized data)
E4
E5
E6
Fixed data-2
E7
E8
E9 to FF
Fixed data-1 (Initialized data)
6-14
DCR-SR90E/SR100/SR100E_ADJ
8.
15 Page table
Note 1: If reading/writing data on pages 15, set data: 01 to page:
0, address: 10, and then select pages: 5. By this data set-
ting, the pages 15 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
ting, the pages 15 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
9.
17 Page table
Note 1: If reading/writing data on pages 17, set data: 01 to page:
0, address: 10, and then select pages: 7. By this data set-
ting, the pages 17 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
ting, the pages 17 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
10. 1A Page table
Note 1: If reading/writing data on pages 1A, set data: 01 to page:
Note 1: If reading/writing data on pages 1A, set data: 01 to page:
0, address: 10, and then select pages: A. By this data set-
ting, the pages 1A can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
ting, the pages 1A can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
11. 1B Page table
Note 1: If reading/writing data on pages 1B, set data: 01 to page:
Note 1: If reading/writing data on pages 1B, set data: 01 to page:
0, address: 10, and then select pages: B. By this data set-
ting, the pages 1B can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
ting, the pages 1B can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
6.
D Page table
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
10 to 13
Fixed data-1 (Initialized data)
14
Fixed data-2
15
Fixed data-1 (Initialized data)
16
Fixed data-2
17 to 27
Fixed data-1 (Initialized data)
28
29
2A
Fixed data-2
2B
2C
Fixed data-1 (Initialized data)
2D
2E
2F
Fixed data-2
30
31, 32
Fixed data-1 (Initialized data)
33
34
Fixed data-2
35 to 56
Fixed data-1 (Initialized data)
57
Fixed data-2
58 to 7F
Fixed data-1 (Initialized data)
7.
13 Page table
Note 1: If reading/writing data on pages 13, set data: 01 to page:
0, address: 10, and then select pages: 3. By this data set-
ting, the pages 13 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
ting, the pages 13 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
Click on the first or last page to see other DCR-SR100 / DCR-SR100E / DCR-SR90E (serv.man4) service manuals if exist.