Sony DCR-PC6E / DCR-PC9E Service Manual ▷ View online
— 13 —
2-7.
MEMORY STICK CONNECTOR, FP-347 FLEXIBLE BOARD
2-8.
CONTROL SWITCH BLOCK (FK-1770)
1
Tapping
screw
(M1.7
(M1.7
×
4)
3
Tapping
screw
(M1.7
(M1.7
×
4)
4
MS connector
retainer
5
Memory stick connector,
FP-347 flexible board (PC9E)
(PC9E)
2
1
Two screws
(M1.7
×
2.5)
1
Two screws
(M1.7
×
2.5)
2
Screw
(M1.7
×
2.5)
3
2
Two tapping
screws
(M1.7
(M1.7
×
4)
3
Two tapping
screws
(M1.7
(M1.7
×
4)
5
Tapping
screw
(M1.7
(M1.7
×
4)
4
Shoe frame
6
Cabinet (L)
7
Control switch block
(FK-1770)
— 14 —
2-10. BJ-002/002A BOARD
1
Four screws
(M1.7
×
4),
lock ace, p2
8
Screw
(M1.7
×
4),
lock ace, p2
4
Screw
(M1.7
×
2.5)
7
Screw
(M1.7
×
2.5)
2
Tripod screw
3
Bottom frame
9
Tapping screw
(M1.7
×
4)
qd
Two tapping
screws (M1.7
×
4)
q;
Terminal ratainer
plate assembly
qa
Battery terminal board
qs
DC-IN
connector
qf
BJ-002 board (PC9E)
BJ-002A board (PC6E)
5
PD-113 harness (16P)
6
PR-063 harness (8P)
CN3100 (for the DC-IN connector) and CN3105 (for the battery terminal board) of BJ-002/002A
board are the same size, and the number of the pins is the same.
So these connectors may be mistaken for each other. When these connectors are mistaken,
the charge system of the unit may break.
So ascertain the color of the connector when assembling these connectors.
board are the same size, and the number of the pins is the same.
So these connectors may be mistaken for each other. When these connectors are mistaken,
the charge system of the unit may break.
So ascertain the color of the connector when assembling these connectors.
Note:
BJ-002/002A board
Battery terminal board
CN3100 (for the DC-IN connector) ················· Blue
CN3105 (for the battery terminal board) ········ White
CN3105 (for the battery terminal board) ········ White
DC-IN connector
CN3100 (Blue)
CN3105 (White)
(Note)
(Note)
(Note)
2-9.
CONTROL SWITCH BLOCK (PS-1770), NS-013 BOARD
3
Three screws
(M1.7
×
2.5)
7
Four screws
(M1.7
×
2.5)
q;
Screw
(M1.7
×
2.5)
qa
NS-013 board
9
Front cover
8
NS window assembly
5
Screw
(M1.7
×
2.5)
1
Battery lock
2
Compression spring
4
Cabinet (rear)
6
Control switch block
(PS-1770)
— 15 —
2-11. LCD HINGE ASSEMBLY, PR-037, PO-007 BOARDS
(Remove the LCD unit referring to section 2-1 before starting disassembling.)
1
Screw
(M1.7
×
2.5)
4
Screw (M1.7
×
2.5)
2
Tapping
screw
(M1.7
(M1.7
×
5)
9
3
Blind plate assembly,
PO-007 board
5
Two claws
7
Claw
6
Hinge cover (rear)
8
Hinge cover (front)
2
PD-113 harness
4
LCD hinge assembly
1
PR-063 harness
Harness
(black)
(black)
Harness
(black)
(black)
Harness
(black)
(black)
Harness
(black)
(black)
Harness
(gray)
(gray)
Harness
(gray)
(gray)
Harness
(gray)
(gray)
Boss hole
1
Connect the black harness at the leftmost end of the
harness (PR-063) and connect the second gray harness
(PR-063) to the PR-037 board by soldering.
(PR-063) to the PR-037 board by soldering.
2
Check that there is no cold soldering, non-soldering,
solder slump nor solder bridge.
Note: Align the direction of the harness
A
as shown in the
picture.
Be careful that the harness must not be caught by the
boss hole.
Be careful that the harness must not be caught by the
boss hole.
3
Connect the third black harness and the fourth gray harness
from the leftmost end of the PO-007 board by soldering.
4
Check that there is no cold soldering, non-soldering, solder
slump nor solder bridge.
Note: Align the direction of the harness
A
as shown in the
picture.
Be careful that the harness must not be caught by the
boss hole.
Be careful that the harness must not be caught by the
boss hole.
Specification
Reference of counting the harness starts counting from the
black harness in the end.
Reference of counting the harness starts counting from the
black harness in the end.
Boss hole
Harness
(gray)
(gray)
7
PR-063 harness
A
PR-063 harness
3
PR-037 board
PR-037 board
PR-037 board
1
Two solderings
5
Two solderings
6
PO-007 board
PO-007 board
Soldering position
PO-007 board
2
PR-037 board
4
Blind plate
assembly
3
Two claws
SOLDERING OF HARNESS (PR-063)
— 16 —
3.
REPAIR PARTS LIST
3-1.
EXPLODED VIEWS
NOTE:
•
-XX, -X mean standardized parts, so they may
have some differences from the original one.
have some differences from the original one.
•
Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
•
The mechanical parts with no reference number
in the exploded views are not supplied.
in the exploded views are not supplied.
3-1-1.
OVERALL SECTION
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
The components identified by mark
0
or
dotted line with mark
0
are critical for safety.
Replace only with part number specified.
1
X-3951-693-1 CAP ASSY, LENS
2
3-989-735-31 SCREW (M1.7), LOCK ACE, P2
3
3-068-774-01 COVER, MICROPHONE
4
3-067-469-21 SHOE, ACCESSORY
5
3-067-187-11 ACE, PLATE SCREW (M2) LOCK
6
4-974-725-01 SCREW (M1.7X2.5), P2
7
3-068-784-01 LID, CPC
8
3-057-482-01 COVER, BATTERY
9
1-475-141-61 REMOTE COMMANDER (RMT-814)
10
3-742-854-01 LID, BATTERY CASE (FOR RMT-814)
MIC901 1-418-926-21 MICROPHONE BLOCK
VC
-265
-265
MIC901
Cabinet (L) section
(See page 20)
(See page 20)
Lens - EVF section
(See page 19)
(See page 19)
Cabinet (R) section-1, 2
(See page 17, 18)
(See page 17, 18)
1
2
6
3
4
5
6
2
2
6
9
10
2
2
7
8
2
Click on the first or last page to see other DCR-PC6E / DCR-PC9E service manuals if exist.