DOWNLOAD Sony DCR-PC101 / DCR-PC101E (serv.man2) Service Manual ↓ Size: 6.01 MB | Pages: 127 in PDF or view online for FREE

(1) Play back the tape on which you added audio.
(2) Select AUDIO MIX in 

 in the menu settings, then press EXEC (p. 187).

(3) Press r/R to adjust the balance between the original sound (ST1) and the new

sound (ST2), then press EXEC.

About five minutes after you disconnect the power source or remove the battery pack,
the setting of AUDIO MIX returns to the original sound (ST1) only. The default setting
is original sound only.

Notes
•New sound cannot be recorded on a tape already recorded in the 16-bit mode (32 kHz,

44.1 kHz or 48 kHz) (p. 190).

•New sound cannot be recorded on a tape already recorded in the LP mode.
•You cannot add audio with the   DV Interface.
•New sound cannot be recorded on blank portions of the tape.

If the i.LINK cable (optional) is connected to your camcorder
You cannot add new sound to a recorded tape.

We recommend that you add new sound on a tape recorded with your camcorder
If you add new sound on a tape recorded with another camcorder (including other
DCR-PC101), the sound quality may become worse.

If you set the write-protect tab of the tape to lock
You cannot record on a tape. Slide the write-protect tab to release the write protection.

VCR  SET

H i F i  SOUND
AUD I O  M I X
A/V

c

DV  OUTST1

ST2

EXIT

RET.

EXEC

R

r

VACATION

COLOR

RET.

POS 

r

SIZE

TITLE
OK

EXIT

POS 

R

PRESET  TITLE

HELLO!
HAPPY  BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR  SWEET BABY
WEDDING
VACATION
THE  END

EXIT

RET.

EXEC

R

r

PRESET  TITLE

HELLO!
HAPPY  BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR  SWEET BABY
WEDDING
VACATION
THE  END

EXIT

RET.

EXEC

R

r

PRESET  TITLE

HELLO!
HAPPY  BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR  SWEET BABY
WEDDING
VACATION
THE  END

EXIT

RET.

EXEC

R

r

r

R

EXEC

r

R

EXEC

r

R

EXEC

CM  SET

TITLE
T I TLEERASE
T I TLE  DSPL
CM  SEARCH
TAPE  T I TLE
ERASE  ALL

CM  SET

TITLE
T I TLEERASE
T I TLE  DSPL
CM  SEARCH
TAPE  T I TLE
ERASE  ALL

EXIT

RET.

EXEC

R

r

EXIT

RET.

EXEC

R

r

READY

FN

If you use a tape with cassette memory, you can superimpose the title. When
you play back the tape, the title is displayed for about five seconds from the
point where you superimposed it.

(1) In standby, recording, playback or playback pause, press FN to display

PAGE1.

(2) Press MENU, then select TITLE in 

, then press EXEC. (p. 190)

(3) Press r/R to select 

, and then press EXEC.

(4) Press r/R to select a desired title, and then press EXEC. The title is displayed

on the LCD screen.

(5) If necessary, change the color, size, or position by pressing COLOR, SIZE,

POS 

r or POS R.

(6) Press TITLE OK.
(7) Press SAVE TITLE.

In playback, playback pause or recording:
The TITLE SAVE indicator appears on the screen for about five seconds and
the title is set.
In standby:
The TITLE indicator appears. And when you press START/STOP to start
recording, TITLE SAVE appears on the screen for about five seconds and the
title is set.

If you set the write-protect tab to lock
You cannot superimpose or erase the title. Slide the write-protect tab to release the write
protection.

To use the custom title
If you want to use the custom title, select 

 in step 3.

On a blank portion of the tape
You cannot superimpose a title on the tape.

If the tape has a blank portion in the middle of the recorded parts
The title may not be displayed correctly.

The titles superimposed with your camcorder
•They are displayed only by DV 

 format video equipment with index titler

function.

•The point you superimposed the title may be detected as an index signal when

searching a recording with other video equipment.

If the tape has too many index signals
You may not be able to superimpose a title because the memory is full. In this case,
delete data you do not need.

Not to display title
Set TITLE DSPL to OFF in the menu settings (p. 190).

Title setting
•The title color changes as follows:

     WHITE 

t YELLOW t VIOLET t RED t CYAN t GREEN t BLUE

•The title size changes as follows:

SMALL 

y LARGE

You cannot input 13 characters or more in LARGE size.

•If you select the title size SMALL, you have nine choices for the title position.

If you select the title size LARGE, you have eight choices for the title position.

One cassette can have up to about 20 titles, if one title consists of five characters
However, if the cassette memory is full with date, photo, and cassette label data, one
cassette can have only up to about 11 titles with five characters each.
Cassette memory capacity is as follows:
– Six date data (maximum)
– 12 photo data (maximum)
– One cassette label (maximum)

The cassette memory is full. Erase any titles you do not need.

(1) Set the POWER switch to CAMERA or VCR.
(2) Press FN to display PAGE1.
(3) Press MENU, then select TITLEERASE in 

, then press EXEC (p. 190).

(4) Select the title you want to erase with r/R, and then press EXEC.

ERASE OK? appears.

(5) Make sure the title is the one you want to erase, and press OK.

ERASING flashes on the screen.
When the title is erased, COMPLETE is displayed.

Press EXIT.

Press CANCEL in step 5.

FN

r

R

EXEC

r

R

EXEC

CM  SET

TITLE
T I TLEERASE
T I TLE  DSPL
CM  SEARCH
TAPE  T I TLE
ERASE  ALL

CM  SET

TITLE
T I TLEERASE
T I TLE  DSPL
CM  SEARCH
TAPE  T I TLE
ERASE  ALL

T I TLE  ERASE

1   HELLO !
2   CONGRATULAT I ONS !
3   HAPPY  NEW  YEAR !
4   PRESENT
5   GOOD  MORN I NG
6   WEDD I NG

T I TLE  ERASE

4   PRESENT

EXIT

RET.

EXEC

R

r

EXIT

RET.

EXEC

R

r

END

EXEC

R

r

ERASE  OK?

OK

CAN–
CEL