Sony DCR-HC1000 / DCR-HC1000E (serv.man4) Service Manual ▷ View online
6-2
DCR-HC1000/HC1000E
Lens de
vice
Mechanism deck Note
LCD block LCD901 (LCD panel, touch panel)
LCD block Backlight LED
EVF block LCD902 (LCD panel)
Flash unit (FL8200)
Mechanism deck M901 (Drum assy) Note
Mechanism MD block
CD-516 board
IC5301,5302, 5306 (CCD imager)
CD-516 board
IC5303, 5304, 5305 (S/H)
DB-017 board
IC7101 (V
ideo IN/OUT)
DB-017 board
IC9301
(RGB dr
iv
er
,
T
iming g
ener
ator (EVF))
LB-015 board
D9400 (backlight (EVF))
PD-221 board
IC600
(RGB dr
iv
er
,
T
iming g
ener
ator (LCD))
RP-241 board
IC6501
(REC/PB
AMP)
SE-149 board
SE520/521 (PITCH /Y
A
W
sensor)
VC-366 board
IC5002, X5001 (T
iming generator)
VC-366 board
IC5003, 5004, 5005 (A
GC,
A/D con
v.
)
VC-366 board
IC6201 (Camera D
V
signal process, etc.)
VC-366 board
IC6401
(D
V signal pr
ocess,RF signal pr
ocess)
Replaced parts
Block replacement
Parts replacement
z
z
z
z
z
z z
z
z z
z
z
z z
z
z z
z
z z
z
z
z
z
z
z
z z
z
z
z z
z
z
z
z
z z
z
z
z
z
z z
z
z z
z
z
z z
z
z
z
z
z z
z
z z
z
z
z
z
z
z
Adjustment
Section
Initialization of
8, A, B, C, D, E, F,
18, 1A, 1B, 1C,
1E,1F page data
Camera
Color EVF
LCD
Mechanism
System control
Servo, RF
Video
Adjustment
Loading of flash memory program
Initialization of A, B, D, 1A,1B page data
Initialization of 8, C, 18, 1C page data
Initialization of E, F, 1E, 1F page data
54MHz/66MHz origin oscillation Check
HALL adj.
MR adj.
Flange back adj.
AWB standard data input
MAX GAIN adj.
F No. & ND light quantity standard data input
LV standard data input
Auto white balance adj.
Color reproduction adj.
Mechanical shutter adj.
PSD sensor gain adj.
Angular velocity sensor sensitivity adj.
Strobe light level adj.
Strobe white balance adj.
EVF automatic adj.
White balance adj.
LCD automatic adj.
V COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Tape path adj.
Touch panel adj.
Serial No. input
CAP FG duty adj.
Switching position adj.
Error rate check
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
1-1. Adjusting items when replacing main parts and boards.
• Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note:
When replacing the drum assy. or the mechanism deck, reset the data of page: 7, address: A7 to A9 to “00”. (Refer to “Record of Use check” of
“6-4. SERVICE MODE”)
“6-4. SERVICE MODE”)
Table. 6-1-1(1).
6-3
DCR-HC1000/HC1000E
CD-516 board
(COMPLEA
T
)
DB-017 board
(COMPLEA
T)
LB-015 board
(COMPLEA
T)
PD-221 board
(COMPLEA
T)
RP-241 board
(COMPLEA
T)
SE-149 board
(COMPLEA
T)
VC-366 board
(COMPLEA
T)
VC-366 board
IC8802 (EEPR
OM)
VC-366 board
IC8402 (EEPR
OM)
VC-366 board
IC8503 (Flash memory)
Supporting
Board
EEPROM
replacement
replacement
z
z
z z
z z
z z
z
z z
z
z z
z
z
z z
z
z
z z
z
z
z z
z
z z
z
z
z z
z
z
z z
z
z
z z
z z
z
z z
z z z
z
z z
z
z
z z
z
z
z z
z
z z
z z
z
z z
z
z
z z
z
z z
z
z z
z
z
z z
z z
z
z z
z
z
z z
z
z
z z
z
z
z z
z
z z
Table. 6-1-1(2).
Adjustment
Section
Initialization of
8, A, B, C, D, E, F,
18, 1A, 1B, 1C,
1E,1F page data
Camera
Color EVF
LCD
Mechanism
System control
Servo, RF
Video
Adjustment
Loading of flash memory program
Initialization of A, B, D, 1A,1B page data
Initialization of 8, C, 18, 1C page data
Initialization of E, F, 1E, 1F page data
54MHz/66MHz origin oscillation Check
HALL adj.
MR adj.
Flange back adj.
AWB standard data input
MAX GAIN adj.
F No. & ND light quantity standard data input
LV standard data input
Auto white balance adj.
Color reproduction adj.
Mechanical shutter adj.
PSD sensor gain adj.
Angular velocity sensor sensitivity adj.
Strobe light level adj.
Strobe white balance adj.
EVF automatic adj.
White balance adj.
LCD automatic adj.
V COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Tape path adj.
Touch panel adj.
Serial No. input
CAP FG duty adj.
Switching position adj.
Error rate check
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
6-4
DCR-HC1000/HC1000E
6-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
• Vectorscope
J-1
J-2
J-3
J-4
Filter for color
temperature correction
(C14)
J-6080-058-A
temperature correction
(C14)
J-6080-058-A
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
Pattern box PTB-450
J-6082-200-A
or
Pattern box PTB-1450
J-6082-557-A
J-6082-200-A
or
Pattern box PTB-1450
J-6082-557-A
Color chart for
pattern box
pattern box
For PTB-450:
J-6020-250-A
J-6020-250-A
For PTB-1450:
J-6082-559-A
J-6082-559-A
J-5
J-6
J-7
J-8
Siemens star chart
J-6080-875-A
J-6080-875-A
Clear chart for
pattern box
pattern box
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
Mini pattern box
J-6082-353-B
J-6082-353-B
Adjustment remote
commander
(RM-95 upgraded)
J-6082-053-B
commander
(RM-95 upgraded)
J-6082-053-B
J-9
J-10
A: CPC-15
J-6082-564-A
J-6082-564-A
B: I/F unit for
LANC control
J-6082-521-A
LANC control
J-6082-521-A
Camera table
J-6082-384-A
J-6082-384-A
A
B
Fig. 6-1-1.
Backgorund
paper
J-2501-130-A
paper
J-2501-130-A
J-11
J-12
Extension cable
(120P, 0.4mm)
J-6082-546-A
(120P, 0.4mm)
J-6082-546-A
6-5
DCR-HC1000/HC1000E
1-1-2.
Preparations
Note1:
For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
DISASSEMBLY”.
Note2:
When performing only the adjustments, the lens block and boards
need not be disassembled.
need not be disassembled.
Note3:
Before performing the adjustments, check the data of page: 0,
address: 10 is “00”. If not, set data: 00 to this address.
address: 10 is “00”. If not, set data: 00 to this address.
1)
Connect the equipment for adjustments according to Fig. 6-1-
3.
3.
Note4:
As removing the FP-953 flexible board (removing CN2103 of the
DB-017 board) means removing the lithium 3V power supply
(BT1001 on the FP-953 flexible board), data such as date, time,
user-set menus will be lost. After completing adjustments, reset
these data.
But the self-diagnosis data and the data on history of use (total
drum rotation time etc.) will be kept even if the lithium 3V power
supply is removed. (Refer to “6-4.Service Mode” for the self-
diagnosis data and the data on history of use.)
DB-017 board) means removing the lithium 3V power supply
(BT1001 on the FP-953 flexible board), data such as date, time,
user-set menus will be lost. After completing adjustments, reset
these data.
But the self-diagnosis data and the data on history of use (total
drum rotation time etc.) will be kept even if the lithium 3V power
supply is removed. (Refer to “6-4.Service Mode” for the self-
diagnosis data and the data on history of use.)
Note5:
Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 10, set data: 01, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 10, set data: 01, and press the PAUSE
button.
The above procedure will enable the camera power to be turned
on with the control key block (PS8200) removed. After completing
adjustments, be sure to exit the “Forced Camera Power ON Mode”.
(Operate the camera functions using the touch panel. When the
control key block (PS8200) is removed, the function buttons of
the adjustment remote commander are not effective even if the
HOLD switch of the adjustment remote commander is set to the
OFF position.)
on with the control key block (PS8200) removed. After completing
adjustments, be sure to exit the “Forced Camera Power ON Mode”.
(Operate the camera functions using the touch panel. When the
control key block (PS8200) is removed, the function buttons of
the adjustment remote commander are not effective even if the
HOLD switch of the adjustment remote commander is set to the
OFF position.)
Note6:
Exiting the “Forced Camera Power ON” Mode
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: A, address: 10, set data: 00, and press the PAUSE
button.
button.
3)
Select page: 0, address: 01, and set data: 00.
Fig. 6-1-2.
Front of the lens
Pattern box
1.0 m (PTB-450)
0.4 m (PTB-1450)
Click on the first or last page to see other DCR-HC1000 / DCR-HC1000E (serv.man4) service manuals if exist.