Sony BDP-CX7000ES Service Manual ▷ View online
BDP-CX7000ES
21
1-5-1. USB Host (Device Test)
(Screen 1)
Diag
Category:
(Screen 2)
Diag
Category: Device Test
Device:
Device:
USB Media check
...
NG
Register Read Check ... OK
Register Read Check ... OK
Register Read Check ... OK
Cannot excute again!
HELP: [RIGHT] [UP] [ENT] [RET]
USB Host
Device Test
USB Media Check: USB media detection check.
Register Read Check: The value of the register of the device is read.
Register Read Check: The value of the register of the device is write.
Register Read Check: The value of the register of the device is read.
Register Read Check: The value of the register of the device is write.
1-5-2. D/A Converter (Device Test)
Diag
Category: Device Test
Device:
Device:
DAC 2 [ch] Check
... OK
DAC 8 [ch] Check
... OK
[ENT] Test Start
HELP: [LEFT] [RIGHT] [UP] [ENT] [RET]
D/A Converter
Dac 2 [ch] Check: 2ch D/A converter test.
Dac 8 [ch] Check: 8ch D/A converter test.
Dac 8 [ch] Check: 8ch D/A converter test.
1-5-3. Ifcon (Device Test)
Diag
Category: Device Test
Device:
Device:
Key
:
Dial
: 0
FDP All ON
Show Strings
LED Squential ON
Fan Control ON
Show Strings
LED Squential ON
Fan Control ON
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
Ifcon
Key: Display corresponding to pressed button.
Dial: Absolute value display of jog dial.
FDP All ON: All segments in fl uorescent indicator tube is lighted up.
Show Strings: The test character is displayed in the character
Dial: Absolute value display of jog dial.
FDP All ON: All segments in fl uorescent indicator tube is lighted up.
Show Strings: The test character is displayed in the character
string of fl uorescent indicator tube.
LED Sequential ON: LED is lighting.
Fan Control ON: Operation on/off switch of fan. The display of
Fan Control ON: Operation on/off switch of fan. The display of
“Fan Control ON” changes into “Fan Control
OFF” if fan is turned on.
OFF” if fan is turned on.
1-4. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
Moves to Diag screen.
[2]
Moves to Log screen.
[3]
Moves to Factory Initialize screen.
[4]
Moves to Ship Mode screen.
[5]
Moves to Network screen.
[6]
Moves to System Information screen.
[
M
]/[
m
]
Moves the cursor.
[
3
]
Moves to the screen of the item selected with the cursor.
* Cursor is not displayed when the menu is fi rst displayed.
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Ship Mode
[5] Network
[6] System Information
[3] Factory Initialize
[4] Ship Mode
[5] Network
[6] System Information
HELP : [DOWN] [ENT] [(NUM)]
HELP (currently available keys, etc.) is displayed
[1] Diag
1-5. Diag
Screen 1: Selects the test category
Operation:
[
Screen 1: Selects the test category
Operation:
[
<
]/[
,
] Selects the category.
[
m
]/[
3
]
Moves to the selected category.
[RETURN] Moves to the top menu of the service mode.
Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
<
]/[
,
]
Selects the device to test.
[
3
]
Executes the test.
[
M
]/[RETURN] Returns to selection of test category.
Moves the cursor.
[
m
]
Moves the cursor.
• List of test categories
Device Test
Audio Video Test
Changer Mecha Test
Device Test
Audio Video Test
Changer Mecha Test
BDP-CX7000ES
22
1-5-7. Video Encoder (Device Test)
Diag
Category: Device Test
Device:
Device:
Register Read Check ... OK
Revision: 0x01
Generate CB
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT]
[RET]
[RET]
Video Encoder
Revision: Read of revision.
Generate CB: Generator of color bar.
Generate CB: Generator of color bar.
1-5-8. External HDMI (Device Test)
Diag
Category: Device Test
Device:
Device:
Register Read Check ... OK
Revision: 0x02
[ENT] Test Start
HELP: [LEFT] [UP] [ENT] [RET]
External HDMI
Revision: Read of revision.
1-5-9. Audio Video Test (Audio Video Test)
(Screen 1)
Diag
Category:
(Screen 2)
Diag
Category: Audio Video Test
HELP: [UP] [ENT] [RET]
Audio Video Test
[ENT] Gen. TONE & Color Bar
The color bar output and the tone output.
1-5-4. I/P Converter (Device Test)
Diag
Category: Device Test
Device:
Device:
Register Read Check ... OK
Revision: 0x02
[ENT] Test Start
HELP: [LEFT] [RIGHT] [UP] [ENT] [RET]
I/P Converter
Revision: Read of revision.
1-5-5. Glue (Device Test)
Diag
Category: Device Test
Device:
Device:
Register Read Check ... OK
Revision: 0xad
Generate CB & RAMP
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT]
[RET]
[RET]
Glue
Revision: Read of revision.
Generate CB & RAMP: Generator of color bar and RAMP.
Generate CB & RAMP: Generator of color bar and RAMP.
1-5-6. HD Enhancer (Device Test)
Diag
Category: Device Test
Device:
Device:
HDE1 Read Check
... OK
Revision: 0x0010
HDE2 Read Check
... OK
HELP: [LEFT] [RIGHT] [UP] [ENT] [RET]
HD Enhancer
Revision: 0x0010
[ENT] Test Start
Revision (HDE1, HDE2): Read of revision.
BDP-CX7000ES
23
1-5-10. Changer Mecha Test (Changer Mecha Test)
(Screen 1)
Diag
Category:
(Screen 2)
Diag
Category: Changer Mecha Test
DISC Sensor
DISC Sensor
: [0]
TABLE Sensor : [0:0:0:0]
LOAD Sensor
: <Released>
DOOR Sensor
: <Closed>
Initialize first, please.
[1] Popper
Up/Down
[OPEN/CLOSE] Open/Close
[PREV] Turn
Left
[NEXT] Turn
Right
[FR]
Turn Around Left
[FF]
Turn Around Right
[PLAY] Chuck/Unchuck
HELP: [UP] [DOWN] [ENT] [RET]
Changer Mecha Test
[0] Initialize
Mechanism cannot be operated if it does not initialize it when the
message of “Initialize fi rst, please.” is displayed.
The message of “Initialize fi rst, please.” disappears when initial-
ization is done.
message of “Initialize fi rst, please.” is displayed.
The message of “Initialize fi rst, please.” disappears when initial-
ization is done.
The sensor display is always updated.
DISC Sensor: “0” or “1” is displayed.
TABLE Sensor: “0” or “1” is displayed.
LOAD Sensor: The state is displayed (“Released”, “Release
DISC Sensor: “0” or “1” is displayed.
TABLE Sensor: “0” or “1” is displayed.
LOAD Sensor: The state is displayed (“Released”, “Release
↔
Lock”, “Table Locked” or “Chucked”).
DOOR Sensor: The state is displayed (“Opened”, “Moving”,
“Closed”, “Opened/Popper Up”, “Opened/Popper
Moving” or “Opened/Popper Down”).
Moving” or “Opened/Popper Down”).
Mechanism can be operated by pressing the button of the corre-
sponding remote commander.
[0]
sponding remote commander.
[0]
The initialization of mechanism is executed.
[1]
The door opens and pop up when the door
closes. The pop up when the door opens and
not pop up. The pop down when the door
opens and pop up.
closes. The pop up when the door opens and
not pop up. The pop down when the door
opens and pop up.
[OPEN/CLOSE]
The door is opened or closed.
[PREV
.
]
One slot is rotated to the left (when the door
closes, it opens) (when the chucking, it chuck
down).
closes, it opens) (when the chucking, it chuck
down).
[NEXT
>
]
One slot is rotated to the right (when the door
closes, it opens) (when the chucking, it chuck
down).
closes, it opens) (when the chucking, it chuck
down).
[
m
]
One rotation to the left (when the door closes,
it opens) (when the chucking, it chuck down).
it opens) (when the chucking, it chuck down).
[
M
]
One rotation to the right (when the door
closes, it opens) (when the chucking, it chuck
down).
closes, it opens) (when the chucking, it chuck
down).
[
N
]
Disc at the position of the drive is downed in
the chuck or the chucking.
the chuck or the chucking.
1-6. Log
Operation:
[1]
Operation:
[1]
Moves to the Error Log screen.
[2]
Moves to the Command Log screen.
[
M
]/[
m
]
Moves the cursor.
[
3
]
Moves to the item selected with the cursor.
[RETURN] Returns to the top menu of the service mode.
Select Log
[2] Command Log
HELP : [DOWN] [ENT] [RET] [(NUM)]
[1] Error Log
The page is changes if the [
<
]/[
,
] buttons are pressed on the
screen where the log was displayed.
Press the [RETURN] button to return from the log display.
Press the [RETURN] button to return from the log display.
1-7. Factory Initialize
Data base, remote control mode, password and other setting value
are initialized, Gracenote relation fi le is deleted.
Operation:
Press the [
Data base, remote control mode, password and other setting value
are initialized, Gracenote relation fi le is deleted.
Operation:
Press the [
3
] button in this screen when restoring the set to its
factory settings.
[
[
3
]
Initialize the set to its factory settings.
[RETURN] Return to the top menu of the service mode.
Factory Initialize
[ENT] Start Initialize
[RET] Return to Top Menu
[RET] Return to Top Menu
HELP : [ENT] [RET]
BDP-CX7000ES
24
1-8. Ship Mode
Changer Mechanism is changed to the ship mode.
Eject all disc in the table before it enters this mode.
Operation:
Press the [
Changer Mechanism is changed to the ship mode.
Eject all disc in the table before it enters this mode.
Operation:
Press the [
3
] button in this screen when setting the chucking
down, turn table free and door closed, and turn the power off.
[
[
3
]
Changes to the ship mode.
[RETURN] Return to the top menu of the service mode
Ship Mode
[ENT] Set to the Ship Mode
[RET] Return to Top Menu
[RET] Return to Top Menu
HELP : [ENT] [RET]
1-9. Network
Display of network information.
Operation:
[
Display of network information.
Operation:
[
<
]/[
,
] Selects the Ifconfi g or Ping.
[
3
]
Executes the information display.
[
M
]
Returns to selection of test category.
Moves the cursor.
[
m
]
Moves the cursor.
[RETURN] Return to the top menu of the service mode
Network
Test: Ping
HELP: [ENT]: InputIP [DOWN] [LEFT]
Ifconfig
Test: Ifconfig
Network
[START]
Ping
Ping To :
(Screen 1)
(Screen 2)
Ifconfi g: Display of network information
Ping: IP that transmits ping is set and it transmits.
Ping: IP that transmits ping is set and it transmits.
Ping input display
Test: Ifconfig
Network
[START]
[ENT] :
Release
[RET] :
Release
[LEFT] : Ifconfig Test
[(NUM)] :
[(NUM)] :
‘0-9’
[TIME] :
‘.’
[CLEAR] : Back Space
Ping
Ping To :
[ENT]/[RET]
Input Ping is released.
[LEFT]
Select the Ifconfi g.
[(NUM)]/[TIME] IP address for Ping is input.
[CLEAR]
[CLEAR]
Back space of one input IP address.
1-10. System
Information
Display of system information.
Operation:
[
[
3
] Measures
ΔIOP of the drive (takes a few seconds:
1time only)
[RETURN] Returns to the top menu of the service mode
Displayed contents:
Model name: Model
Destination: Dest
IP address: IP
Mac address: Mac
CPU version: CPU
Model name: Model
Destination: Dest
IP address: IP
Mac address: Mac
CPU version: CPU
← [Firm Version] [Generation Version]
NBL version: NBL
Kernel version: Kernel
Host version: Host
Kernel version: Kernel
Host version: Host
← [Host Version] [Release Version]
Optical disc drive: Drive
← [Model] [Firm Revision]
[Serial
Number]
Drive usage time: LDTime
← [Media]: [LDTime]/[ΔIOP]/
ΔIOP/ΔIOP
ΔIOP temperature measurement : dIOP_TEMP
IFCon version: IFCon
IFCon version: IFCon
← [Ifcon Version]
IFCon Firm date: FirmDate
Set temperature: Temp
Set temperature: Temp
← [°C]
System Information
Model
: BDM1G-ES
Dest
: UC
IP
: 172.16.19.3
Mac
: xx:xx:xx:xx:xx:xx
CPU
: E5.013.0_pre[F030]
NBL
: BDP3G 3.4.0
Kernel
: BDP3G-3.4.0
Host
: 15.1.003
20090411000A00
Drive
: BPD210 1.00 @BDM0000096&__20
LDTime
: BD
: [ 12:57] / [ 0]
DVD
: [ 14:03] / [ 0]
CD
: [ 25:54] / [ 0]
dIOP_TEMP: [ 0]
Ifcon
: 1.01
FirmDate: 04/22
Temp
: 34 [degC]
[RET]: TopMenu
Click on the first or last page to see other BDP-CX7000ES service manuals if exist.