Sony SAL85F14Z Service Manual ▷ View online
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP11
Install the focus scale plate, aligning the index line B of distance scale plate with the marking-off line b, and fix it with the polyester tape
(black) 10mm.
Note:
After installing the focus cam ring reinforcements at two locations, affix the polyester tape (black) 10mm. (Refer to HELP12.)
Note:
In case of replacing the focus scale plate, the type of this parts need to be selected according to the type of focus cam ring.
Select the part referring to page 3-6.
HELP12
Install the Cam Tube Reinforcement Plate reinforcements to the fixed barrel block at two locations with 2 sheets of polyester tape (black)
10mm.
Note:
Install securely so that the cam tube reinforcement plate reinforcement does not float.
Note:
In case of the focus ring is the old type, affix the polyester tape (black) 10mm one time around the cam tube reinforcement plate.
Focus Cam Ring
Fixed Barrel Block
Polyester Tape (Black) 10 mm
Focus Scale Plate
B
b
Polyester Tape (Black) 10 mm
Polyester Tape (Black) 10 mm
Cam Tube Reinforcement Plate
Cam Tube Reinforcement Plate
Fixed Barrel Block
Focus Cam Ring
Ver. 1.4 2008.01
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP13
Adhesive bond (B-10): J-6082-612-A
1.
Install the brush and the brush hold plate to the brush base plate with two screws.
2.
Rotate the focus cam ring to make the infinity end.
3.
Fix tentatively the brush base plate with brush installed with two screws so that the contact of brush comes to the trace-less portion of
main flexible unit.
4.
Adjust the focus brush position. (Refer to 4-7-1.)
5.
After adjusting, apply the adhesive bond (B-10) to the screw fixing the brush and the heads of two screws fixing the brush base plate.
Brush Hold Plate
Brush
Brush Base Plate
Screw
Apply the adhesive bond (B-10)
Brush Base Plate
Focus Cam Ring
Apply the adhesive
bond (B-10)
bond (B-10)
Brush
Main flexible pattern
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP14
Adhesive bond (B-40): J-6082-614-A
1.
Build the 2nd move frame lens block in the focus cam ring, aligning its groove with the portion A of fixed barrel block so that the
screw hole of lens block can be seen in the groove of cam ring.
2.
Select the guide roller to fit the grooves of focus cam ring and the fixed barrel block. Apply the adhesive bond (B-40) to the tips of
screwed portion of guide pin. Fix the 2nd move frame lens block with the guide pins. (2 locations)
Part No.
Description
Diameter (mm)
D1
D2
2-693-380-
02
Guide Roller (A)
5.03
4.53
2-693-381-
02
Guide Roller (B)
5.03
4.52
2-693-382-
02
Guide Roller (C)
5.03
4.51
2-693-383-
02
Guide Roller (D)
5.02
4.53
2-693-384-
02
Guide Roller (E)
5.02
4.52
2-693-385-
02
Guide Roller (F)
5.02
4.51
2-693-386-
02
Guide Roller (G)
5.01
4.53
2-693-387-
02
Guide Roller (H)
5.01
4.52
2-693-388-
02
Guide Roller (I)
5.01
4.51
2-693-435-
02
Guide Roller (J)
4.98
4.48
2-693-436-
02
Guide Roller (K)
5.03
4.45
2-693-437-
02
Guide Roller (L)
5.02
4.45
2-693-438-
02
Guide Roller (M)
5.01
4.45
3-212-227-01
Guide Roller (N)
5.03
4.44
3-212-228-01
Guide Roller (O)
5.02
4.44
3-212-229-01
Guide Roller (P)
5.01
4.44
Fixed Barrel
Focus Cam Ring
2nd move Frame Lens Block
Screw hole
Groove
Guide Roller
Apply the adhesive bond (B-40)
A
Cam groove
Ver. 1.4 2008.01
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
3.
Build the 1st moving barrel (with 1st ball frame (A) lens block) in the focus cam ring.
4.
Select a guide roller suitable for the grooves of the focus cam ring and the fixed barrel block.
Apply the adhesive bond (B-40) to the tips of screwed portions of guide pins. Tighten the guide pins to fix the 1st moving barrel.
(Install six pieces of guide pin.)
5.
Rotate the focus cam ring and confirm that the 2nd move frame lens block and the 1st moving barrel smoothly.
6.
Apply the adhesive bond (B-40) to the tip of screwed portion of Guide Pin. Then, install the guide pin to the focus cam ring.
Guide Roller
Guide Roller
Guide Roller
Guide Pin
Guide Pin
Guide Pin
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Guide Pin
Guide Pin
Guide Pin
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Click on the first or last page to see other SAL85F14Z service manuals if exist.