Sony SAL85F14Z Service Manual ▷ View online
2-6
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
2-1-5. FIXED HOLDING TUBE BLOCK AND FOCUS OPERATION RING BLOCK
HELP27
HELP34
HELP26
HELP25
HELP24
HELP23
HELP30
HELP24
HELP29
HELP32
HELP28
HELP27
HELP33
EXPLODED VIEW
HELP31
3
Torque Ring Retainer Block
1
Knurl Focus Operation Ring
Torque Ring
5
Friction Spring A
Fixed Holding
Tube Block
Tube Block
2
Focus
Operation
Ring Block
Ring Block
4
Torque Ring
Block
Focus
Operation
Ring
Operation
Ring
Float Ring
Seissors Lever Block
Focus Operation
Ring Chip
Ring Chip
7
Focus Hold Button
Block
Friction Sheet
6
Mount Index
Orange Color Ring
FOCUS HOLD BUTTON CHECK
Ver. 1.3 2007.10
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP
Note for assembling and grease applying positions are shown.
HELP01
Adhesive bond (B-10): J-6082-612-A
1.
Apply the adhesive bond (B-10) to the specified portions of screws at the inner side of front ring in the width of 10 to 20mm at two locations.
2.
Screw the G1 decoration plate in as far as it touches the front ring. Then, turn the G1 decoration plate counterclockwise so that the
guide mark line of focus scale window comes to the center of “Carl Zeiss” characters on the G1 decoration plate.
HELP02
Adhesive bond (B-10): J-6082-612-A
Apply the adhesive bond (B-10) to the indicated portion of screw at the inner side of front ring in the width of 10mm, and fix the G1
stopper with the screw.
Knurl Focus Operation Ring
G1 Decoration Plate
Lens (G1)
Front Ring
Apply the adhesive bond (B-10)
(2 places the cimference.)
(2 places the cimference.)
Guide mark line of Focus scale window
G1 Decoration Plate
Knurl Focus Operation Ring
Lens (G1)
Front Ring
Apply the adhesive bond (B-10)
(1 places the cimference.)
(1 places the cimference.)
G1 Stopper
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP03
Grease (G-85): J-6082-626-A
1.
Apply the grease (G-85) to indicated portion of 1st ball frame lens block.
2.
Install the 1st ball frame (A) lens block to the front ring, tighten the three screws shown in figure.
Note:
When installing the front ring to the outer tube block, install it in the relationship shown in figure.
Confirm of the position of click pin on the circumference of front ring, attach the front ring so that food that is not click pin
may come to side of index line of the focus scale window.
Ver 1.2 2006.12
1st Ball Frame (A) Lens Block
Outer Tube Block
Front Ring
Click Pin
(Circumference of front ring)
(Circumference of front ring)
Apply the grease (G-85)
(Screw portion, all round)
(Screw portion, all round)
Food
Focus Scale Window
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP04
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-10):
J-6082-612-A
1.
Apply the anti-diffusion agent (A-20) to indicated portion of 1st lens holder A.
2.
Install the 1st ball frame (A) lens block to the 1st lens holder A in orders of 1 to 4.
Note:
After installing the G3 stopper, apply the adhesive bond (B-10) between G3 stopper and 1st lens holder A. (One place in the
width of 10mm)
HELP05
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the tips of two screws shown in figure and tighten the screws.
2
1
3
4
G2 Stopper
G3 Stopper
Lens (G2)
Lens (G3)
1st Lens Holder A
Apply the anti-diffusion agent (A-20) (All round)
Apply the adhesive bond (B-40)
Apply the adhesive bont (B-10)
(One place in the width of 10mm)
(One place in the width of 10mm)
1st Lens Holder A
G3 Stopper
Click on the first or last page to see other SAL85F14Z service manuals if exist.