Sony SAL85F14Z Service Manual ▷ View online
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
6.
Install the ground spring to the position indicated in figure with two screws.
HELP21
Grease (G-35):
J-6082-621-A
Anti-diffusion agent (A-20): J-6082-611-A
Apply the grease (G-35) to the specified portions (five locations on the groove) of focus cam ring and the anti-diffusion agent (A-20) to
the specified portions.
HELP22
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
Grease (G-35):
J-6082-621-A
1.
Apply the adhesive bond (B-40) to the screwed portion of focus stopper and tighten the fixed barrel with the focus stopper.
2.
Apply the anti-diffusion agent (A-20) and the grease (G-35) to the indicated portions of fixed barrel.
Ground Spring
Screw
Apply the grease (G-35)
(To the groove in 5 places)
(To the groove in 5 places)
Apply the anti-diffusion
agent (A-20) (All round)
agent (A-20) (All round)
Fixed Barrel
Apply the grease (G-35) (To the groove in 8 places)
Focus Stopper
Apply the adhesive bond (B-40)
Apply the grease (G-35) (All round)
Apply the grease (G-35) (All round)
Apply the grease (G-35)
(All round)
(All round)
Apply the anti-diffusion agent
(A-20) (All round)
(A-20) (All round)
Apply the anti-diffusion agent (A-20) (All round)
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP23
Adhesive bond (B-10): J-6082-612-A
1.
Apply the adhesive bond (B-10) to screw portion (2 places) of the focus operation ring.
2.
Tighten the knurl focus operation ring as far as it goes to the fixed holding tube block.
Note:
When installing, push the lens-removing fixture to the focus operating ring chip at the inner side so that the fixed holding
tube block does not move.
3.
Confirm that the knurl focus operation ring rotates smoothly.
4.
Confirm that the scissors lever block has a play of 0.5mm.
Fixed Holding Tube Block
Knurl Focus Operation Ring
Focus Operation Ring Chip
Apply the adhesive bond (B-10) (Both sides 2 places, width10mm )
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP24
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-35):
J-6082-621-A
Grease (G-80):
J-6082-625-A
1.
Apply the anti-diffusion agent (A-20) to the indicated entire circumference of focus operation ring.
2.
Apply the grease (G-35) to three contacts of control tube guide pin of focus operation ring and the indicated portions.
3.
Apply the grease (G-80) to three contacts where the scissors lever block of focus operation ring contacts.
Apply the grease (G-35) (All round)
Apply the anti-diffusion agent
(A-20) (All round)
(A-20) (All round)
Apply the grease (G-35) to 3 contacts where the
Focus Operation Ring Gaide Pin.
Focus Operation Ring Gaide Pin.
Apply the grease (G-80) to 3 contacts
where the scissors lever block.
where the scissors lever block.
Focus Oerating Ring
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP25
Adhesive bond (B-40): J-6082-614-A
1.
Install the focus operation ring to the fixed holding tube block.
2.
Apply the bond (B-40) to the screwed portions of focus operating ring guide pin fix the focus operation ring with focus operating ring
guide pin and focus operating ring chip at three locations.
Note:
When installing, place the round edge of focus operation ring chip to the fixed holding tube block side.
3.
Confirm that the focus operation ring rotates smoothly.
4.
Confirm that the scissors lever block has a play of 0.5mm.
Fixed Holding Tube Block
Scissors Lever Block
Focus Operation Ring Chip
Focus Operation Ring Guide Pin
Focus Operation Ring
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Click on the first or last page to see other SAL85F14Z service manuals if exist.