Sony DSLR-A700P Service Manual ▷ View online
HELP
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
HELP03-03
Adhesive bond (B-40): J-6082-614-A
Grease (G-116):
J-6082-628-A
1.
Apply the grease (G-116) to the grooves of the first cam ring (9 portions).
2.
Adjust to be in phase the zoom cam ring and the fixed barrel as shown in the picture (Fig. a).
3.
Adjust to be in phase the first cam ring and the fixed barrel assy as shown in the picture (Fig. b) and install them.
4. Install the three 1st lens block operation rollers.
5. Apply the adhesive bond (B-40) to about two threads from the tips of stopper screws and tighten them.
First Cam Ring
First Cam Ring
Two Screw Holes
Two Screw Holes
Fixed Barrel
Two Screw Holes
Stopper of the
Zoom Cam Ring
Zoom Cam Ring
Stoppers of the
Zoom Cam Ring
Zoom Cam Ring
Stopper of the
Zoom Cam Ring
Zoom Cam Ring
Fixed Barrel Assy
Fixed Barrel
Assy
Assy
Screw Hole A
Screw Hole A
Cut Portion
Cut Portion
Zoom Cam Ring
(Fig.a)
(Fig.b)
Apply the grease (G-116)
Apply the grease (G-116)
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
1st Lens Block
Operation Roller
Operation Roller
HELP
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
HELP03-04
Adhesive bond (B-40): J-6082-614-A
1.
Adjust to be in phase the zoom cam ring and the fixed barrel as shown in the picture (Fig. a).
2.
Insert the second lens holder to the fixed barrel and adjust them to be in phase as shown in the picture (Fig. b).
3.
Install the 2nd lens block hold shaft into the second lens holder, then install the 2nd lens block guide roller, 2nd lens block guide shaft
and 2nd guide roller spring 400 H2.
4.
Apply the adhesive bond (B-40) to about two threads from the tips of stopper screws and tighten them.
Cutout
Cutout
Two Screw
Holes
Holes
Two Screw
Holes
Holes
Groove
Groove
Stoppers of the
Zoom Cam Ring
Zoom Cam Ring
Second Lens Holder
Second Lens
Holder
Holder
Fixed Barrel
(Fig.a)
(Fig.b)
Fixed Barrel
Fixed Barrel Assy
Zoom Cam Ring
Zoom Cam Ring
Scratched Line
Scratched Line
2nd Lens Block
Guide Roller
Guide Roller
2nd Lens Block Hold Shaft
2nd Lens Block
Guide Shaft
Guide Shaft
2nd Guide
Roller Spring 400 H2
Roller Spring 400 H2
Second Lens Holder
2nd Lens Block
Hold Shaft
Hold Shaft
Second Lens
Holder
Holder
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
HELP
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
HELP03-05
Grease (G-116): J-6082-628-A
1.
Affix the two cam ring support sheets to the zoom cam ring.
2.
Apply the grease (G-116) to the indicated portions of the zoom cam ring (7 portions).
3.
Apply the grease (G-116) to the indicated portions of the fixed barrel (14 portions).
4.
Put together the zoom cam ring and the fixed barrel while adjusting the cutout portion to two screw holes on the fixed barrel.
5.
Confirm the projection of the zoom cam ring engages with the groove of the fixed barrel by turning the zoom cam ring.
Zoom Cam Ring
Cam Ring Support Sheet
Apply the grease (G-116)
Apply the grease (G-116)
Zoom Cam Ring
Cutout Portion
Projection
Fixed Barrel
Groove
Zoom Cam Ring
Fixed Barrel
Two Screw
Holes
Holes
Apply the grease (G-116)
Apply the grease (G-116)
Apply the
grease (G-116)
grease (G-116)
Apply the
grease (G-116)
grease (G-116)
2-14
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
1
2
3
Projection
Projection
Outer Cover Block
Support Plate
HELP04-02
HELP04-04
HELP04-03
HELP04-01
Mount Shielding O-Ring
Part A
Part A
Pinch Clutch Block
Cut Portion
Projection
Focus Ring Reinforcement Plate
(G-116)
(B-110)
(B-110)
(B-110)
B-10
B-110
10mm
10mm
(See Page
2-15.)
2-15.)
On disassembling,
remove by turning
Part A.
remove by turning
Part A.
2-2-2.
(From Page
2-7.)
2-7.)
Universal wrench
J-6082-609-A
J-6082-609-A
Chip-B for
universal wrench:
J-6082-609-2
universal wrench:
J-6082-609-2
PINCH CLUTCH TORQUE
ADJUSTMENT
ADJUSTMENT
Make the lens
upside down.
upside down.
2-2-4. FIXED BARREL ASSY
EXPLODED VIEW
Click on the first or last page to see other DSLR-A700P service manuals if exist.