Sony DSLR-A700P Service Manual ▷ View online
HELP
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
HELP
Note for assembling and grease applying positions are shown.
HELP02-01
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-118):
J-6082-680-A
1.
Apply the anti-diffusion agent (A-20) to the lens mount block as shown in the figure.
2.
Apply the grease (G-118) to the lens mount block as shown in the figure.
3.
Insert the preset lever to the tip of aperture operate plate lever.
4.
Pass Connection board through the lens mount block and in the middle of preset lever insertion, turn the lens mount block in the
arrow direction, adjust screw hole positions and secure with four screws.
Apply the grease (G-118)
Apply the
grease (G-118)
grease (G-118)
(Apply the grease (G-118) to 3-5 mm
from the edge on rear side of claw)
from the edge on rear side of claw)
Claw
Lens Mount Block
Apply the anti-diffusion agent (A-20)
Back Adjustment
Washer
Washer
Hole for Coupler
3 to 5mm
Preset Lever
Tip of Aperture Operate
Plate Lever
Plate Lever
Back Adjustment
Washer
Washer
Lens Mount Block
Screw Holes
Hole for Coupler
Coupler
Screw Hole
Connection Board
HELP
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
HELP02-02
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-115):
J-6082-627-A
Grease (G-118):
J-6082-680-A
1.
Apply the anti-diffusion agent (A-20) to the zoom barrel as shown in the figure.
2.
Apply the grease (G-115) to the zoom barrel as shown in the figure.
3.
Apply the grease (G-118) to the zoom barrel as shown in the figure.
Apply the anti-diffusion agent (A-20)
(All circumferences)
(All circumferences)
Zoom Barrel
Apply the grease (G-115)
(All circumferences)
(All circumferences)
Apply the grease (G-115)
(All circumferences)
(All circumferences)
Zoom Barrel
Zoom Barrel
Apply the grease (G-118)
(All circumferences)
(All circumferences)
Zoom Barrel
HELP
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
HELP02-03
1.
Set the focus to near position.
2.
Position the projection as shown below by turning the focus differential ring.
3.
Install the fixed barrel assy to the inner barrel assy.
Note :
Install so that the projection of focus differential ring engages with lever of the focus ring and the boss of the fixed barrel assy
engages with the hole for dowel on the fixed barrel.
Note :
Be careful about the aperture operate plate lever is not to touch the fixed barrel assy.
4.
Confirm the focus differential ring moves synchronously with the focus operation ring moving by turning the focus operation ring to
the both directions (near
↔ infinity).
Projection
Projection
Focus Differential
Ring
Ring
Fixed Barrel Assy,
Focus Rubber Ring
Focus Rubber Ring
Fixed Barrel
Assy
Assy
Lever of the
Focus Ring
Focus Ring
Lever of the
Focus Ring
Focus Ring
Inner Barrel Assy,
Focus Differential Ring
Focus Differential Ring
Screw Hole
Boss
Hole for Boss
Screw Hole
Fixed Barrel
Turn the Focus
Differential Ring
Differential Ring
Aperture Operate
Plate Lever
Plate Lever
Set the focus to near position.
Focus Differential Ring
Turn focus operation ring
to the both directions (near infinity).
to the both directions (near infinity).
HELP
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
HELP02-04
Grease (G-116): J-6082-628-A
Grease (G-118): J-6082-680-A
1.
Apply the grease (G-116) and the grease (G-118) to the focus differential ring as shown in the figure.
2.
Turn the aperture operate plate lever in the arrow direction.
3.
Install the focus differential ring while inserting the lever of the focus cam barrel into the groove on the focus differential ring.
Apply the grease (G-118)
Apply the grease (G-116)
Focus Differential Ring
Groove
Lever of the Focus Cam Barrel
Aperture Operate Plate Lever
Click on the first or last page to see other DSLR-A700P service manuals if exist.