Sony DSLR-A700P Service Manual ▷ View online
HELP
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
HELP02-05
Adhesive bond (B-110): J-6082-617-A
1.
Apply the adhesive bond (B-110) to the near barrel assy as shown in the figure.
2.
Install the cinuber ring.
In case of cinuber ring assembled with rear barrel assy with the adhesive bond (B-10), be sure to apply the adhesive bond (B-110) to the
following 6 portions.
Cinuber Ring
Rear Barrel Assy
Rear Barrel
Assy
Assy
20mm
20mm
20mm
B-110
Apply covering the point rear barrel assy
is in contact with cinuber ring.
is in contact with cinuber ring.
Cinuber Ring
Cinuber Ring
Rear Barrel Assy
Rear Barrel Assy
Apply the adhesive
bond (B-110)
bond (B-110)
Apply the adhesive
bond (B-110)
bond (B-110)
Apply the adhesive
bond (B-110)
bond (B-110)
2-9
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
1
3rd Lens Block 2
Guide Roller
Guide Roller
3rd Lens Block 2
Guide Roller
Guide Roller
3rd Lens Block 2
Guide Roller
Guide Roller
3rd Lens Block
1 Guide Roller
1 Guide Roller
3rd Lens Block
1 Guide Roller
1 Guide Roller
3rd Lens Block
1 Guide Roller
1 Guide Roller
Focus Cam Barrel
HELP03-01
HELP03-02
HELP03-02
HELP03-02
2
3-4 Moving Frame Assy
(See Page
2-10.)
2-10.)
B-40
B-40
B-40
2-2-2.
(From Page
2-7.)
2-7.)
Make the lens
upside down.
upside down.
Lens made
upside down.
upside down.
2-2-3. INNER BARREL ASSY
EXPLODED VIEW
2-10
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
4
3
B-40
B-40
Note (Assembling)
(From Page
2-9.)
2-9.)
B
(See Page
2-11.)
2-11.)
A
(See Page
2-11.)
2-11.)
1st Lens Block
Guide Roller
Guide Roller
1st Lens Block
Guide Shaft
Guide Shaft
1st Lens Block
Guide Shaft
Guide Shaft
Screw Hole on the
Front Lens Barrel
Front Lens Barrel
First Cam Ring,
Zoom Cam Ring,
Fixed Barrel,
Second Lens Holder
Zoom Cam Ring,
Fixed Barrel,
Second Lens Holder
Fixed Barrel
Zoom Cam Ring
Two Scerw Holes
of the Fixed Barrel
of the Fixed Barrel
Mark
1st Lens Block Guide Barrel,
Front Lens Barrel R Assy
Front Lens Barrel R Assy
Note (Assembling)
Align the Two Scerw Holes of
the Fixed Barrel, with the Mark,
as shown in the figure.
the Fixed Barrel, with the Mark,
as shown in the figure.
Note (Assembling)
Set the position the screw hole on 1st
Lens Block Guide Shaft can be seen
through the screw hole on the Front
Lens Barrel.
Lens Block Guide Shaft can be seen
through the screw hole on the Front
Lens Barrel.
Adjust the phase between Zoom Cam
Ring and Fixed Barrel and then install
1st Lens Block Guide Shaft.
Ring and Fixed Barrel and then install
1st Lens Block Guide Shaft.
Install 1st Lens Block Guide
Shaft in the direction as
shown in the figure.
Shaft in the direction as
shown in the figure.
2-11
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
6
5
Friction Cloth A
(G-115)
B
(From Page
2-10.)
2-10.)
Front Lens
Barrel Assy
Barrel Assy
Projections
1st Lens Block
Guide Barrel
Guide Barrel
1st Lens Block
Guide Barrel
Guide Barrel
Grooves
Note (Assembling)
(G-116)
(G-116)
B-40
B-40
A
(From Page
2-10.)
2-10.)
1st Lens Block
Operation Roller
Operation Roller
7
HELP03-03
HELP03-03
(See Page
2-12.)
2-12.)
First Cam Ring
Engage three projections
with three grooves.
with three grooves.
Click on the first or last page to see other DSLR-A700P service manuals if exist.