DOWNLOAD Sony DSLR-A700P Service Manual ↓ Size: 5.83 MB | Pages: 127 in PDF or view online for FREE

Model
DSLR-A700P
Pages
127
Size
5.83 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
dslr-a700p.pdf
Date
PREV: Sony SAL2470Z (serv.man4) Service Manual

Sony DSLR-A700P Service Manual ▷ View online

2-12
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
8
B-40
B-40
B-40
2nd Lens Block
Guide Roller
2nd Lens Block Hold Shaft
2nd Lens Block
Guide Shaft
2nd Guide Roller
Spring 400 H2
Second Lens
Holder
Second Lens Holder
(See Page
 2-13.)
(G-116)
(G-116)
Second Lens
Holder
Focus Guide
Pin
(From Page
 2-11.)
HELP03-04
HELP03-04
2-13
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
9
q;
qa
B-10
HELP03-05
(From Page
 2-12.)
10mm
10mm
Cross
section
Cross
section
Inside
Outside
10mm
Zoom Cam
Barrel Holder
Universal wrench
J-6082-609-A
Chip-A for 
universal wrench:
J-6082-609-1
Inner screw
portion
(G-116)
Zoom Torque
Spring Washer
Zoom Torque
Spring
Zoom Cam Ring
Cam Ring Support Sheet
Fixed Barrel
(G-116)
(G-116)
(G-116)
(G-116)
(G-116)
(G-116)
HELP
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
HELP
Note for assembling and grease applying positions are shown.
HELP03-01
Grease (G-116):  J-6082-628-A
1.
Apply the grease (G-116) to the focus cam barrel as shown in the figure.
2.
Insert the lever of focus cam barrel into the between guide portion of 3-4 moving frame assy (position without 4th cam guide and
aperture operation lever).
3.
Turn the focus cam barrel in the arrow direction to engage the focus guide pin with the groove on the focus cam barrel.
Focus Cam Barrel
Inner Barrel Assy
Apply the grease (G-116)
Apply the grease (G-116)
Mark
4th cam guide
Guide of the 3-4 Moving
Frame Assy
Lever
Aperture Operate
Plate Lever
Focus Cam Barrel
Focus Cam Barrel
Focus Guide Pin
Focus Guide Pin
Second Lens Holder
Second Lens Holder
Groove  
HELP
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
HELP03-02
Adhesive bond (B-40):  J-6082-614-A
1.
Adjust to be in phase the fixed barrel and the zoom cam ring as shown in the picture(Fig.a).
2.
Engage the projection A of the 3-4 moving frame assy with the groove A on the fixed barrel.
3.
While keeping the position three screw holes on the 3-4 moving frame assy are seen through the grooves on the zoom cam ring,
install the three 3rd lens block 1 guide rollers, then slide first cam barrel the position as shown in the figure.
4.
Shorten the whole block and install three 3rd lens block 2 guide rollers.
5.
Apply the adhesive bond (B-40) to about two threads from the tips of stopper screws and tighten them.
3-4 Moving Frame Assy
3-4 Moving
Frame Assy
Fixed Barrel
Install with setting the projection A away
from the projection B.
Zoom Cam Ring
Projection A
Groove A
Projection B
Projection A
Groove A
(Fig.a)
3-4 Moving
Frame Assy
Screw Holes
3rd Lens Block
1 Guide Roller
First Cam Barrel
First Cam Barrel
Zoom Cam Ring
Apply the adhesive 
bond (B-40)
Apply the adhesive 
bond (B-40)
Apply the adhesive 
bond (B-40)
3rd Lens Block
1 Guide Roller
3rd Lens Block
1 Guide Roller
3rd Lens Block 2
Guide Roller
Screw Hole of
the 1st Lens Block
Guide Barrel
Page of 127
Display

Click on the first or last page to see other DSLR-A700P service manuals if exist.

RANDOM: