Sony DSC-RX1RM2 (serv.man2) Service Manual ▷ View online
5.
Turn the control dial to the left to set the shutter speed to “BULB”, shoot nine pieces of continuations.
Note
Without pushing and holding it for a few seconds, shoot nine pieces successively.
BULB
BULB
30”
25’’
F5.6
ISO3200
6.
Set the shutter speed to “ 30" ”, shoot one piece.
30”
BULB
30”
25’’
20’’
F5.6
+2.0
ISO3200
M.M.
DSC-RX1RM2
2-21
7.
Confirm that there is no leak light on the tenth picture shot at step 6.
Leak light
Leak light
Leak light (example 1)
OK (no leak light)
Leak light (example 2)
If there is the leak light, confirm that the tape and sheet are attached correctly referring to the
“2-10. Notes on Attaching
the IM Imager Unit and the CLC”
and
“2-11. Notes on Attaching the LSV-1601A Device”
Tip
About the pasting positions of the tape and the sheet, refer to the “Notes on Assembling the Overall Section-3”.
DSC-RX1RM2
2-22
Section 3
Adjustment
For adjusting these models, the Adjust Station and the Adjust Manual are required.
Adjust Station
It is the software to start up Adjust Manual for each model.
The installer of the Adjust Station and the installation manual are attached, be sure to confirm the contents of them.
The installer of the Adjust Station and the installation manual are attached, be sure to confirm the contents of them.
Adjust Manual
It is the software to adjust and check digital cameras and camcorders for service.
The installer of the Adjust Manual and the installation manual are attached, be sure to confirm the contents of them.
The installer of the Adjust Manual and the installation manual are attached, be sure to confirm the contents of them.
Note
Be sure to install Adjust Station first.
DSC-RX1RM2
3-1
Click on the first or last page to see other DSC-RX1RM2 (serv.man2) service manuals if exist.