DOWNLOAD Sony DSC-P1 (serv.man3) Service Manual ↓ Size: 1.68 MB | Pages: 36 in PDF or view online for FREE

Self-diagnosis display
• C: ss: ss

You can reverse the camera mal-
function yourself. (However, con-
tact your Sony dealer or local
authorized Sony service facility
when you cannot recover from
the camera malfunction.)

• E: ss: ss

Contact your Sony dealer or lo-
cal authorized Sony service facil-
ity.

Display Code

  C:04:ss

  C:32:ss

  C:13:ss

  E:61:ss

  E:91:ss

Countermeasure

Use a NP-FS11/F10 battery pack.

Turn the power off and on again.

Format the “Memory stick”.

Insert a new “Memory Stick”.

Checking of lens drive circuit.

Cause

You are using a battery pack that is not an
“InfoLITHIUM” battery pack.

Trouble with hardware.

Unformatted memory stick is inserted.

Memory stick is broken.

When failed in the focus and zoom
initialization.

Abnormality when flash is being
charged.

Checking of flash unit or replacement
of flash unit.

Caution Display During Error

for “InfoLITHIUM” BAT-
TERY ONLY

SYSTEM ERROR

FORMAT ERROR

MEMORY STICK ERROR

—

Check that the following accessories are supplied with your digital still camera.

3-064-296-11 MANUAL, INSTRUCTION (ENGLISH)
3-064-296-21 MANUAL, INSTRUCTION (FRENCH,GERMAN)(AEP)
3-064-296-31 MANUAL, INSTRUCTION (SPANISH,PORTUGUESE)(AEP)
3-064-296-41 MANUAL, INSTRUCTION (ITALIAN,DUTCH)(AEP)
3-064-296-61 MANUAL, INSTRUCTION (RUSSIAN,SWEDISH)(AEP)

AC-LS1A AC power adaptor

0

 1-476-332-41

Power cord (1)

0

 1-769-608-11 (AEP)

0

 1-783-374-11 (UK)

NP-FS11 battery pack (1)

AV connecting cable (1.5 m) (1)
1-783-738-31

USB cable (1)
1-757-293-11

CD-ROM (1)
3-063-797-01

Memory stick (8 MB) (1)

Wrist strap (1)
3-050-664-11

• Items marked “*” are not stocked since they are seldom required for routine service.

Some delay should be anticipated when ordering these items.

• The parts numbers of such as a cabinet are also appeared in this section.

Refer to the parts number mentioned below the name of parts to order.

The components identified by mark 

0

 or dotted

line with mark 

0

 are critical for safety.

Replace only with part number specified.

CPC lid
3-064-225-01

Wrist strap
3-050-664-11

2-2. REAR CABINET BLOCK

(Page 10)

2-11. PD-137 BOARD

(Page 13)

2-1. BT LID ASSEMBLY

REPLACING METHOD
(Page 8)

DSC-P1

2-13. SW-349 BOARD

(Page 13)

2-14. LCD MODULE

(Page 13)

2-12. ZM-26 BOARD

(Page 13)

2-15. ALMINUM CABINET (REAR)

ASSEMBLY REPLACING METHOD
(Page 14)

2-16. INNER CABINET (REAR)

ASSEMBLY REPLACING METHOD
(Page 15)

2-17. JACK COVER 

REPLACING METHOD
(Page 16)

2-3. UPPER CABINET BLOCK

(Page 10)

2-7. DD-150 BOARD

(Page 11)

2-4. PW-122 BOARD

(Page 10)

2-5. LENS BLOCK

(Page 11)

2-6. CA-66, PS-440 BOARDS

(Page 11)

2-8. ST-62 BOARD

(Page 12)

2-9. HI-74 BOARD

(Page 12)

2-10. MT-60 BOARD

(Page 12)

 This set can be disassembled in the order shown below.

 Follow the disassembly procedure in the numerical order given.

BT plate of BT holder assembly
having last code-1 and -2

BT plate of BT holder assembly
having last code-3

This portions are different.

[Note]
The shape of BT plate varies depending on the last code of BT holder assembly,
as shown below. The BT lid assembly for service parts (X-3951-282-1) can be 
used only for the last code-3 of the BT holder assembly. For the last code-1 and
 -2 of the BT holder assembly, replace the BT holder assembly.