Sony DSC-P1 (serv.man3) Service Manual ▷ View online
– 17 –
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
3. REPAIR PARTS LIST
3-1-1. UPPER CABINET SECTION
NOTE:
• -XX and -X mean standardized parts, so they may
have some difference from the original one.
• Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
KNOB, BALANCE (WHITE) . . . (RED)
↑
↑
Parts Color
Cabinet's Color
• Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
should be anticipated when ordering these items.
• The mechanical parts with no reference number in
the exploded views are not supplied.
3-1. EXPLODED VIEWS
DSC-P1
1
X-3951-025-1 CABINET (FRONT) ASSY
2
3-989-735-81 SCREW (M1.7), LOCK ACE, P2
3
3-064-242-01 CABINET (BOTTOM)
4
3-969-387-01 FOOT, RUBBER
* 5
3-064-227-01 SHEET, MICROPHONE
* 6
3-065-229-01 SHEET (UPPER)
7
3-989-735-51 SCREW (M1.7), LOCK ACE, P2
8
A-7096-377-A PW-122 BLOCK ASSY
* 9
3-055-971-01 CUSHION, MICROPHONE
10
3-318-382-03 SCREW (1.7), TAPPING
11
X-3951-027-1 CABINET (UPPER) ASSY
12
3-064-263-01 BUTTON, SHUTTER
13
3-064-260-01 KNOB, POWER
14
3-064-237-01 SPRING, COMPRESSION
15
3-064-266-01 SLIDER (POWER)
16
3-064-259-01 KNOB, MODE
17
X-3946-488-1 SPRING ASSY, AE LEAF
18
3-064-496-01 DISK (MODE)
19
3-318-382-21 SCREW (1.7X3), TAPPING
* 20
3-066-383-01 SHEET, FLEXIBLE FIXED
MIC901 1-542-446-11 MICROPHONE
* SW151
X-3951-075-1 SLIDER (MODE) ASSY
12
11
16
17
18
19
14
15
9
8
6
20
5
not supplied
13
7
7
10
7
2
3
4
2
1
not
supplied
supplied
SW151
MIC901
Rear cabinet section (See page 18.)
Main section
(See page 19.)
(See page 19.)
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number speci-
fied.
critical for safety.
Replace only with part number speci-
fied.
– 18 –
3-1-2. REAR PANEL SECTION
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
51
3-318-382-03 SCREW (1.7), TAPPING
52
not supplied
PD-137 BLOCK ASSY (TYPE ST)
52
not supplied
PD-137 BLOCK ASSY (TYPE SA)
53
A-7096-375-A SW-349 BLOCK ASSY
* 54
3-064-278-01 SHEET METAL, ZM
55
not supplied
ZM-26 BOARD, COMPLETE
* 56
3-703-357-02 PIN, PARALLEL (DIA. 1.6X5)
57
X-3951-031-1 CABINET (REAR) ASSY, INNER (SERVICE)
58
3-064-281-01 COVER, JACK
59
3-055-366-01 MARK, MS
60
3-065-177-01 SCREW (1.7X3)
61
3-064-225-01 LID, CPC
62
7-624-118-01 RING, RETAINING E-2.5
63
X-3951-032-1 CABINET (REAR) ASSY, ALUMINUM (SERVICE)
64
3-064-248-01 HOLDER, F BUTTON
* 65
3-064-250-01 SPRING, F BUTTON
66
3-064-247-01 BUTTON, FUNCTION
67
3-064-274-01 COVER, LCD
68
3-064-230-01 SHEET (P), ADHESIVE
* 69
3-064-233-01 SHEET (B), INSULATING
* 70
3-065-667-01 SHEET (SW), INSULATING
* 71
3-065-230-01 SHEET (F), LIGHT INTERCEPTION
72
3-064-219-01 ADHESIVE SHEET (A)
D9001
not supplied
BLOCK, LIGHT GUIDE PLATE (TYPE ST)
D9001
not supplied
BLOCK, LIGHT GUIDE PLATE (TYPE SA)
LCD901 not supplied
INDICATOR MODULE, LIQUID CRYSTAL
(TYPE SA)
LCD901 not supplied
ACX309AK-1 (TYPE ST)
62
not supplied
58
57
72
72
56
55
54
51
52
51
51
69
51
70
51
71
59
60
61
67
68
64
65
66
LCD901
D9001
53
63
– 19 –
3-1-3. MAIN SECTION
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
111
not
supplied
supplied
not
supplied
supplied
115
116
111
121
112
120
111
106
106
117
106
106
106
122
109
110
108
108
123
107
106
105
104
IC151
102
118
103
101
113
119
A
A
114
(Note)
120
101
not supplied
LENS, VIDEO (98WA)
102
not supplied
FILTER BLOCK, OPTICAL
103
not supplied
RUBBER (K), SEAL
104
not supplied
CD-290 BOARD, COMPLETE
105
3-713-791-41 SCREW (M1.7X5), TAPPING, P2
106
3-989-735-51 SCREW (M1.7), LOCK ACE, P2
* 107
3-064-244-01 FRAME, LENS
108
3-064-217-01 CUSHION, FRAME
109
3-064-216-01 CUSHION (L)
110
3-064-215-01 SCREW (M1.7), STEP
111
3-318-382-03 SCREW (1.7), TAPPING
0 112
not supplied
ST-62 BOARD, COMPLETE
113
X-3951-028-1 HOLDER ASSY, BT
114
X-3951-282-1 BT LID ASSY (SERVICE) (Note)
115
3-064-207-01 CLAW, BT LOCK
116
3-064-208-01 SPRING, BT LOCK
117
not supplied
MT-60 BOARD, COMPLETE (SERVICE)
(BT-2, CA-66, DD-150, HI-74 and PS-440 boards
are included in this complete board)
118
not supplied
PLATE, LIGHT INTERCEPTION
* 119
3-066-692-01 SHEET, INSULATING
120
1-679-962-11 FP-338 FLEXIBLE BOARD
121
3-064-238-01 SHEET (C), INSULATING
122
3-064-232-01 SHEET (A), INSULATING
* 123
3-065-666-01 SHEET (LF), INSUALTING
IC151
not supplied
CCD BLOCK ASSY (CCD IMAGER)
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number speci-
fied.
critical for safety.
Replace only with part number speci-
fied.
(Note) Be sure to read “2-1. BT LID ASSEMBLY
REPLACING METHOD” on page 8 when
changing the BT lid assy.
changing the BT lid assy.
– 20 –
4. GENERAL
DSC-P1
This section is extracted from
instruction manual.
instruction manual.
2
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
not expose the unit to rain or
moisture.
Never expose the battery pack to
temperature above 140°F (60°C), such as in
a car parked in the sun or under direct
sunlight.
temperature above 140°F (60°C), such as in
a car parked in the sun or under direct
sunlight.
If you have any questions about this product,
you may call:
Sony Customer Information Center
1-800-222-SONY (7669)
The number below is for the FCC related
matters only.
you may call:
Sony Customer Information Center
1-800-222-SONY (7669)
The number below is for the FCC related
matters only.
Regulatory Information
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
Note:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
— Reorient or relocate the receiving
antenna.
— Increase the separation between the
equipment and receiver.
— Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
the receiver is connected.
— Consult the dealer or an experienced
radio/TV technician for help.
WARNING
For the Customers in the
U.S.A.
U.S.A.
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the
product’s enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
alert the user to the presence
of uninsulated “dangerous
voltage” within the
product’s enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the
appliance.
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the
appliance.
Declaration of Conformity
Trade Name:
SONY
Model No.:
DSC-P1
Responsible Party:Sony Electronics Inc.
Address:
Address:
1 Sony Drive, Park
Ridge, NJ, 07656 USA
Ridge, NJ, 07656 USA
Telephone No.:
201-930-6972
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
3
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
DISPOSAL OF LITHIUM ION
BATTERY.
LITHIUM ION BATTERY.
DISPOSE OF PROPERLY.
BATTERY.
LITHIUM ION BATTERY.
DISPOSE OF PROPERLY.
You can return your unwanted lithium ion
batteries to your nearest Sony Service
Center or Factory Service Center.
batteries to your nearest Sony Service
Center or Factory Service Center.
Note:
In some areas the disposal of lithium ion
batteries in household or business trash may
be prohibited.
In some areas the disposal of lithium ion
batteries in household or business trash may
be prohibited.
For the Sony Service Center nearest you call
1-800-222-SONY (United States only)
For the Sony Factory Service Center nearest
you call 416-499-SONY (Canada only)
1-800-222-SONY (United States only)
For the Sony Factory Service Center nearest
you call 416-499-SONY (Canada only)
Caution:
Do not handle damaged or leaking lithium
ion battery.
Do not handle damaged or leaking lithium
ion battery.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO
NOT USE THIS POLARIZED AC PLUG
WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE
EXPOSURE.
TO PREVENT ELECTRIC SHOCK, DO
NOT USE THIS POLARIZED AC PLUG
WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE
EXPOSURE.
This product has been tested and found
compliant with the limits sets out on the
EMC Directive for using connection cables
shorter than 3 meters.
compliant with the limits sets out on the
EMC Directive for using connection cables
shorter than 3 meters.
The electromagnetic fields at the specific
frequencies may influence the picture and
sound of this camera.
frequencies may influence the picture and
sound of this camera.
A moulded plug complying with BS 1363 is
fitted to this equipment for your safety and
convenience.
fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to
be replaced, a 5 AMP fuse approved by
ASTA or BSI to BS 1362, (i.e. marked with
be replaced, a 5 AMP fuse approved by
ASTA or BSI to BS 1362, (i.e. marked with
or
mark) must be used.
If the plug supplied with this equipment has
a detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never
use the plug without the fuse cover. If you
should lose the fuse cover, please contact
your nearest Sony service station.
a detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never
use the plug without the fuse cover. If you
should lose the fuse cover, please contact
your nearest Sony service station.
Directive:EMC Directive 89/336/EEC.92/
31/EEC
This equipment complies with the EMC
regulations when used under the following
circumstances:
• Residential area
• Business district
• Light-industry district
(This equipment complies with the EMC
standard regulations EN55022 Class B.)
regulations when used under the following
circumstances:
• Residential area
• Business district
• Light-industry district
(This equipment complies with the EMC
standard regulations EN55022 Class B.)
For the Customers in CANADA
This Class B digital apparatus complies with
Canadian ICES-003.
Canadian ICES-003.
For the Customers in the U.S.A.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
For the Customers in the
U.S.A. and Canada
U.S.A. and Canada
Attention for the Customers in
Europe
Europe
NOTICE FOR THE CUSTOMERS
IN THE UNITED KINGDOM
IN THE UNITED KINGDOM
For the Customers in
Germany
Germany
“Memory Stick”
“Memory Stick” and Battery
Pack
Pack
N50
4
For the Customers in the
U.S.A. and Canada
U.S.A. and Canada
Trial recording
Before you record one-time events, you may
want to make a trial recording to make sure
that the camera is working correctly.
Before you record one-time events, you may
want to make a trial recording to make sure
that the camera is working correctly.
No compensation for contents of
the recording
Contents of the recording cannot be
compensated for if recording or playback is
not possible due to a malfunction of your
camera, etc.
the recording
Contents of the recording cannot be
compensated for if recording or playback is
not possible due to a malfunction of your
camera, etc.
Notes on image data compatibility
• This camera conforms with the Design
• This camera conforms with the Design
Rules for Camera File Systems universal
standard established by the JEIDA (Japan
Electronic Industries Development
Association). You cannot play back on
your camera still images recorded on other
equipment (DCR-TRV890E/TRV900/
TRV900E, DSC-D700, DSC-D770) that
does not conform with this universal
standard. (These models are not sold in
some areas.)
standard established by the JEIDA (Japan
Electronic Industries Development
Association). You cannot play back on
your camera still images recorded on other
equipment (DCR-TRV890E/TRV900/
TRV900E, DSC-D700, DSC-D770) that
does not conform with this universal
standard. (These models are not sold in
some areas.)
• Playback of images recorded with your
camera on other equipment and playback
of images recorded or edited with other
equipment on your camera are not
guaranteed.
of images recorded or edited with other
equipment on your camera are not
guaranteed.
Precaution on copyright
Television programs, films, video tapes, and
other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the provision of the
copyright laws.
Television programs, films, video tapes, and
other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the provision of the
copyright laws.
Do not shake or strike the camera
In addition to malfunctions and inability to
record images, this may render the
“Memory Stick” unusable or image data
breakdown, damage or loss may occur.
In addition to malfunctions and inability to
record images, this may render the
“Memory Stick” unusable or image data
breakdown, damage or loss may occur.
Do not aim the camera at the sun
or other bright light
This may cause irrecoverable damage to
your eyes.
or other bright light
This may cause irrecoverable damage to
your eyes.
LCD screen, finder (only models
with a finder) and lens
• The LCD screen and the finder are
with a finder) and lens
• The LCD screen and the finder are
manufactured using extremely high-
precision technology so over 99.99% of
the pixels are operational for effective use.
However, there may be some tiny black
points and/or bright points (white, red,
blue or green in color) that constantly
appear on the LCD screen and the finder.
These points are normal in the
manufacturing process and do not affect
the recording in any way.
precision technology so over 99.99% of
the pixels are operational for effective use.
However, there may be some tiny black
points and/or bright points (white, red,
blue or green in color) that constantly
appear on the LCD screen and the finder.
These points are normal in the
manufacturing process and do not affect
the recording in any way.
• Be careful when placing the camera near a
window or outdoors. Exposing the LCD
screen, the finder or the lens to direct
sunlight for long periods may cause
malfunctions.
screen, the finder or the lens to direct
sunlight for long periods may cause
malfunctions.
Do not get the camera wet
When taking pictures outdoors in the rain or
under similar conditions, be careful not to
get the camera wet. If moisture
condensation occurs, refer to page 56 and
follow the instructions on how to remove it
before using the camera.
When taking pictures outdoors in the rain or
under similar conditions, be careful not to
get the camera wet. If moisture
condensation occurs, refer to page 56 and
follow the instructions on how to remove it
before using the camera.
Back up recommendation
To avoid the potential risk of data loss,
always copy (back up) data to a disk.
To avoid the potential risk of data loss,
always copy (back up) data to a disk.
Handling of the movable lens
This camera uses a movable lens.
Be careful not to strike or apply excessive
force to the lens portion.
This camera uses a movable lens.
Be careful not to strike or apply excessive
force to the lens portion.
When the camera is used for long
periods
Note that the camera body may become hot.
periods
Note that the camera body may become hot.
Battery pack
THIS CLASS B DIGITAL DEVICE
COMPLIES WITH PART 15 OF THE
FCC RULES AND THE CANADIAN
ICES-003 OPERATION IS SUBJECT
TO THE FOLLOWING TWO
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED
OPERATION.
COMPLIES WITH PART 15 OF THE
FCC RULES AND THE CANADIAN
ICES-003 OPERATION IS SUBJECT
TO THE FOLLOWING TWO
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED
OPERATION.
Be sure to read the following
before using your camera
before using your camera
6
Getting started
Identifying the parts
See the pages in parentheses for details of operation.
A POWER switch/lamp
B Shutter button (15) (21)
C MODE selector (32)
D Built-in microphone
B Shutter button (15) (21)
C MODE selector (32)
D Built-in microphone
Do not touch while recording.
E Flash (20)
F Photocell window for flash
F Photocell window for flash
Do not block while recording.
G Tripod receptacle (bottom
surface)
Use a tripod with a screw length of
less than 9/32 inch (6.5 mm). You
will be unable to firmly secure the
camera to tripods having longer
screws, and may damage the
camera.
less than 9/32 inch (6.5 mm). You
will be unable to firmly secure the
camera to tripods having longer
screws, and may damage the
camera.
H Finder window
I Self-timer/
I Self-timer/
recording lamp (only during
recording moving images)
recording moving images)
J Display window
K Lens
K Lens
1
2
3
4
5
6
7
8
9
0
qa
Click on the first or last page to see other DSC-P1 (serv.man3) service manuals if exist.