DCR-HC51E, DCR-HC52, DCR-HC52E, DCR-HC53E, DCR-HC54, DCR-HC54E — Sony Movie Service Manual (repair manual)

Model
DCR-HC51E DCR-HC52 DCR-HC52E DCR-HC53E DCR-HC54 DCR-HC54E
Pages
29
Size
2.52 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 3
File
dcr-hc51e-dcr-hc52-dcr-hc52e-dcr-hc53e-dcr-hc54-dc.pdf
Date

View Sony DCR-HC51E / DCR-HC52 / DCR-HC52E / DCR-HC53E / DCR-HC54 / DCR-HC54E Service Manual online

Revision History
Revision History
Sony EMCS Co.
SERVICE MANUAL
LEVEL
 
3
Link
Link
MODEL INFORMATION TABLE
PRINTED WIRING BOARDS
SCHEMATIC DIAGRAMS
REPAIR PARTS LIST
DCR-HC51E/HC52/HC52E/HC53E/HC54/HC54E_L3
Ver. 1.2  2009.04
DIGITAL VIDEO CAMERA RECORDER
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque  0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
2009D0800-1
  © 2009.04
Published by Kohda TEC
9-852-224-12
Photo: DCR-HC52
N MECHANISM (MDX-N220)
US Model
Canadian Model
AEP Model
UK Model
East European Model
North European Model
E Model
Argentine Model
Australian Model
Chinese Model
Korea Model
Brazillian Model
Mexican Model
Thai Model
DCR-HC51E/HC52/HC52E/HC53E/
HC54/HC54E
— 2 —
DCR-HC51E/HC52/HC52E/HC53E/HC54/HC54E_L3
• Abbreviation
AR
: Argentine model
AUS : Australian model
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
EE
: East European model
KR
: Korea model
MX : Mexican model
NE
: North European model
Model information table
HC51E
AEP, UK, NE, EE
PAL
OUT
Model
Destination
Color system
DV  i.LINK Interface
USB jack
HC53E
AEP, UK, NE, EE
PAL
OUT
HC52
NTSC
IN/OUT
HC52E
NE, AUS, CH, E
US, CND, MX, BR,
AR, KR, E
PAL
IN/OUT
HC54
CND, AR, E
NTSC
IN/OUT
HC54E
NE, CH, E
PAL
IN/OUT
— 3 —
DCR-HC51E/HC52/HC52E/HC53E/HC54/HC54E_L3
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
4-2.  SCHEMATIC  DIAGRAMS
DCR-HC51E/HC52/HC52E/HC53E/HC54/HC54E_L3
Link
Link
VC-537 BOARD (1/13) 
(CONNECTOR)
VC-537 BOARD (8/13) 
(VIDEO OUT, AUDIO I/O)
VC-537 BOARD (9/13) 
(HI CONTROL)
VC-537 BOARD (10/13) 
(CAMERA/MECHA CONTROL)
VC-537 BOARD (11/13) 
(SERVO)
VC-537 BOARD (12/13) 
(EVR (D/A CONVERTER))
VC-537 BOARD (13/13) 
(LCD/EVF DRIVE)
VC-537 BOARD (2/13) 
(BATT CHARGE/POWER SUPPLY)
VC-537 BOARD (3/13) 
(DC/DC CONVERTER)
VC-537 BOARD (4/13) 
(A/D CONVERTER, TIMING GENERATOR)
VC-537 BOARD (5/13) 
(LENS DRIVE, EVR)
VC-537 BOARD (6/13) 
(DV SIGNAL PROCESS, DV INTERFACE)
VC-537 BOARD (7/13) 
(REC/PB AMP)
COMMON NOTE FOR SCHEMATIC DIAGRAMS
Page of 29

Download Sony DCR-HC51E / DCR-HC52 / DCR-HC52E / DCR-HC53E / DCR-HC54 / DCR-HC54E Service Manual (Repair Manual)

Here you can view online or download Sony DCR-HC51E / DCR-HC52 / DCR-HC52E / DCR-HC53E / DCR-HC54 / DCR-HC54E Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sony DCR-HC51E / DCR-HC52 / DCR-HC52E / DCR-HC53E / DCR-HC54 / DCR-HC54E Movie. Information contained in Sony DCR-HC51E / DCR-HC52 / DCR-HC52E / DCR-HC53E / DCR-HC54 / DCR-HC54E service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).