Sony STR-DA5300ES Service Manual ▷ View online
9
STR-DA5300ES
A-VIDEO BOARD SERVICE POSITION
In checking the A-VIDEO board, prepare jig (extension cable J-2501-257-A: 1.25 mm Pitch, 14 cores, Length 300 mm).
ANALOG BOARD SERVICE POSITION
In checking the ANALOG board, prepare jig (extension cable J-2501-258-A: 1.25 mm Pitch, 16 cores, Length 300 mm).
connect jig (extension cable J-2501-257-A)
to the CONTROL board (CN2010) and A-VIDEO board (CN6507).
to the CONTROL board (CN2010) and A-VIDEO board (CN6507).
A-VIDEO board
(CN6507)
(CN6507)
CONTROL board
(CN2010)
(CN2010)
insulating sheet
connect jig (extension cable J-2501-258-A)
to the CONTROL board (CN2011) and ANALOG board (CN602).
to the CONTROL board (CN2011) and ANALOG board (CN602).
ANALOG board
(CN602)
(CN602)
CONTROL board
(CN2011)
(CN2011)
insulating sheet
10
STR-DA5300ES
LEAD WIRE SETTING
insulating sheet
MAIN board
In checking the board, make two
capacitors discharge for electric
shock prevention. (R: 800
capacitors discharge for electric
shock prevention. (R: 800
Ω
/2W)
C2490
C2490
C2491
C2491
CAUTION
MAIN BOARD SERVICE POSITION
heat sink
The lead wire must not come in contact with the transformer and the heat sink.
transformer
Please band together so that a primary side cable
cannot touch a power transformer and heat sink.
cannot touch a power transformer and heat sink.
11
STR-DA5300ES
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
Description and location of parts (US and Canadian models)
Getting Started
Front panel
To remove the cover
Press PUSH.
When you remove the cover, keep it out
of reach from children.
When you remove the cover, keep it out
of reach from children.
Status of the POWER button
Off
The receiver is turned off (initial
setting).
Press POWER to turn the receiver on.
You cannot turn the receiver on using
the remote.
The receiver is turned off (initial
setting).
Press POWER to turn the receiver on.
You cannot turn the receiver on using
the remote.
On/Standby
Press
Press
?
/1 on the remote to turn
the receiver on or set it to the standby
mode.
When you press POWER on the
receiver, the receiver will be turned off.
mode.
When you press POWER on the
receiver, the receiver will be turned off.
Name
Function
A
POWER
Press to turn the
receiver on or off.
receiver on or off.
B
AUTO CAL MIC
jack
jack
Connects to the
supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function.
supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function.
C
TONE MODE
Adjusts FRONT/
CENTER/
SURROUND/
SURROUND BACK
BASS and TREBLE.
Press TONE MODE
repeatedly to select
BASS or TREBLE,
then turn TONE to
adjust the level.
CENTER/
SURROUND/
SURROUND BACK
BASS and TREBLE.
Press TONE MODE
repeatedly to select
BASS or TREBLE,
then turn TONE to
adjust the level.
TONE
D
MEMORY/
ENTER
ENTER
Press to operate a tuner
(FM/AM) and satellite
radio (XM/SIRIUS).
(FM/AM) and satellite
radio (XM/SIRIUS).
TUNING MODE
TUNING
E
Remote sensor
Receives signals from
remote commander.
remote commander.
F
DIMMER
Press repeatedly to
adjust brightness of the
display.
adjust brightness of the
display.
G
DISPLAY
Press repeatedly to
select information
displayed on the display.
select information
displayed on the display.
H
SUR BACK
DECODING
DECODING
Press to activate SB
DECODING.
DECODING.
I
Display
window
window
The current status of
the selected component
or a list of selectable
items appears here.
the selected component
or a list of selectable
items appears here.
J
2CH/A.DIRECT
Press to select sound
field.
field.
A.F.D.
MOVIE
MUSIC
K
ZONE/
POWER,
SELECT
POWER,
SELECT
Press SELECT
repeatedly to select
zone 2, zone 3 or main
zone. Each time you
press POWER, the
output signals for the
selected zone will be
turned on or off.
repeatedly to select
zone 2, zone 3 or main
zone. Each time you
press POWER, the
output signals for the
selected zone will be
turned on or off.
L
DMPORT
Press to select the
audio/video input
signal from the
component connected
to the DIGITAL
MEDIA PORT adapter.
audio/video input
signal from the
component connected
to the DIGITAL
MEDIA PORT adapter.
M
HDMI
Press to select input
source from the
component connected
to the HDMI IN jack.
source from the
component connected
to the HDMI IN jack.
N
PHONES jack
Connects to
headphones.
headphones.
O
SPEAKERS
(OFF/A/B/A+B)
(OFF/A/B/A+B)
Switch to OFF, A, B,
A+B of the front
speakers.
A+B of the front
speakers.
P
VIDEO 3 IN/
PORTABLE AV
IN jacks
PORTABLE AV
IN jacks
Connect to a portable
audio/video component
such as a camcorder or
video game.
audio/video component
such as a camcorder or
video game.
Q
MULTI
CHANNEL
DECODING
lamp
CHANNEL
DECODING
lamp
Lights up when multi-
channel audio signals
are decoded.
channel audio signals
are decoded.
Name
Function
Name
Function
R
INPUT
SELECTOR
SELECTOR
Turn to select the input
source to play back.
To select the input
source for zone 2 or
zone 3, press ZONE/
SELECT (
source to play back.
To select the input
source for zone 2 or
zone 3, press ZONE/
SELECT (
qa
) to select
zone 2 or zone 3 first
(“ZONE 2 INPUT” or
“ZONE 3 INPUT”
appears on the display),
then turn INPUT
SELECTOR to select
the input source.
(“ZONE 2 INPUT” or
“ZONE 3 INPUT”
appears on the display),
then turn INPUT
SELECTOR to select
the input source.
S
MASTER
VOLUME
VOLUME
Turn to adjust the
volume level of all
speakers at the same
time.
volume level of all
speakers at the same
time.
12
STR-DA5300ES
Rear panel
A
DIGITAL INPUT/OUTPUT section
OPTICAL IN/
OUT jacks
OUT jacks
Connect to a DVD
player, Super Audio
CD player, etc. The
COAXIAL jack
provides a better
quality sound.
player, Super Audio
CD player, etc. The
COAXIAL jack
provides a better
quality sound.
COAXIAL IN
jacks
jacks
HDMI IN/
OUT* jacks
OUT* jacks
Connect to a DVD
player, Blu-ray Disc
Player, or a satellite
tuner. An image and
the sound are output
to TV or a projector.
player, Blu-ray Disc
Player, or a satellite
tuner. An image and
the sound are output
to TV or a projector.
B
Control jack for Sony equipment
and other external components
and other external components
IR REMOTE
IN/OUT jacks
IN/OUT jacks
Connect an IR
repeater.
repeater.
TRIGGER
OUT jacks
OUT jacks
Connect to interlock
on/off of the power
supply of other 12V
TRIGGER
compliant
components, or the
amplifier/receiver of
zone 2 or zone 3.
on/off of the power
supply of other 12V
TRIGGER
compliant
components, or the
amplifier/receiver of
zone 2 or zone 3.
CTRL S IN/
OUT jacks
OUT jacks
Connect to Sony TV,
DVD player or VCR
with CONTROL S
jack.
DVD player or VCR
with CONTROL S
jack.
C
DMPORT
Connects to a Sony
DIGITAL MEDIA
PORT adapter.
DIGITAL MEDIA
PORT adapter.
* You can watch the selected input image when you
connect the MONITOR VIDEO OUT jack to a TV.
You can operate this receiver using a GUI
(Graphical User Interface).
You can operate this receiver using a GUI
(Graphical User Interface).
D
ANTENNA section
FM ANTENNA
jack
jack
Connects to the FM
wire antenna (aerial)
supplied with this
receiver.
wire antenna (aerial)
supplied with this
receiver.
AM
ANTENNA
jack
ANTENNA
jack
Connects to the AM
loop antenna (aerial)
supplied with this
receiver.
loop antenna (aerial)
supplied with this
receiver.
XM jack
Connects to the XM
Mini Tuner and
Home Dock (not
supplied).
Mini Tuner and
Home Dock (not
supplied).
SIRIUS jack
Connects to a
SiriusConnect Home
tuner (not supplied).
SiriusConnect Home
tuner (not supplied).
E
COMPONENT VIDEO INPUT/
OUTPUT section
OUTPUT section
Y, P
B
/C
B
, P
R
/
C
R
IN/OUT*
jacks
Connect to a DVD
player, TV, or a
satellite tuner.
player, TV, or a
satellite tuner.
F
RS-232C port
Used for
maintenance and
service.
maintenance and
service.
G
AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jacks
OUT jacks
Connect to a tape
deck or MD deck, etc.
deck or MD deck, etc.
MULTI
CHANNEL
INPUT jacks
CHANNEL
INPUT jacks
Connect to a Super
Audio CD player or
DVD player with an
analog audio jack for
7.1 channel or 5.1
channel sound.
Audio CD player or
DVD player with an
analog audio jack for
7.1 channel or 5.1
channel sound.
PRE OUT jacks Connect to an
external power
amplifier.
amplifier.
H
VIDEO/AUDIO INPUT/OUTPUT
section
section
AUDIO IN/
OUT jacks
OUT jacks
Connect to a VCR or
a DVD player etc..
a DVD player etc..
VIDEO IN/
OUT* jacks
OUT* jacks
S VIDEO IN/
OUT* jacks
OUT* jacks
AUDIO OUT
jacks
VIDEO OUT
jack
jacks
VIDEO OUT
jack
Connect to the
component in zone 2
or zone 3.
component in zone 2
or zone 3.
EXT VIDEO IN
jack
jack
Connects to the
component when
you want to watch in
PIP (Picture in
Picture) window.
component when
you want to watch in
PIP (Picture in
Picture) window.
I
SPEAKERS section
Connects to speakers.
Click on the first or last page to see other STR-DA5300ES service manuals if exist.