Sony STR-DA5300ES Service Manual ▷ View online
17
STR-DA5300ES
You can use the supplied remote RM-AAL009 to
operate the receiver and to control the Sony audio/video
components that the remote is assigned to operate.
operate the receiver and to control the Sony audio/video
components that the remote is assigned to operate.
RM-AAL009
Remote commander
Name
Function
A
AV
?
/
1
(on/
standby)
Press to turn on or off the audio/video
components that the remote is assigned to
operate.
components that the remote is assigned to
operate.
If you press the ?/1 (B) at the same time,
it will turn off the receiver and other Sony
components (SYSTEM STANDBY).
it will turn off the receiver and other Sony
components (SYSTEM STANDBY).
Note
The function of the AV?/1 switch
changes automatically each time you
press the input button (C).
changes automatically each time you
press the input button (C).
B ?
/
1
(on/
standby)
Press to turn the receiver on or off.
If ZONE 2 or ZONE 3 is selected, only
the main receiver is turned on or off with
this button. To turn off all components
including an amplifier in zone 2 or zone 3,
If ZONE 2 or ZONE 3 is selected, only
the main receiver is turned on or off with
this button. To turn off all components
including an amplifier in zone 2 or zone 3,
press ?/1 and AV?/1 (A) at the same
time (SYSTEM STANDBY).
time (SYSTEM STANDBY).
Saving the power in standby
mode.
mode.
When “HDMI Control” and “RS-232C
Control” are set to “OFF.”
Control” are set to “OFF.”
C
Input
buttons
buttons
Press one of the buttons to select the
component you want to use. Press a
pink-labeled button after pressing SHIFT
(wj). When you press any of the input
buttons, the receiver turns on. The buttons
are factory assigned to control Sony
components. You can program the remote
to control non-Sony components
following the steps in “Programming the
remote”.
component you want to use. Press a
pink-labeled button after pressing SHIFT
(wj). When you press any of the input
buttons, the receiver turns on. The buttons
are factory assigned to control Sony
components. You can program the remote
to control non-Sony components
following the steps in “Programming the
remote”.
D
ZONE 2
ZONE 3
ZONE 3
Press to enable the zone 2 or zone 3
operation.
operation.
E
AMP
Press to enable the receiver operation.
F
MUSIC
Press to select sound field.
Name
Function
Name
Function
G
MOVIE
Press to select sound field.
H
Numeric
buttons
buttons
Press to
− preset/tune to preset stations.
− select track numbers of the CD player,
DVD player, Blu-ray Disc Player or
MD deck. Press 0/10 to select track
number 10.
MD deck. Press 0/10 to select track
number 10.
− select channel numbers of the VCR or
satellite tuner.
− After pressing TV (wk), press the
numeric buttons to select the TV
channels.
channels.
I
ENTER
Press to enter the value after selecting a
channel, disc or track using the numeric
buttons.
channel, disc or track using the numeric
buttons.
MEMORY
Press to store a station during tuner
operation.
operation.
J
AMP MENU
Press to display the menu to operate the
receiver.
receiver.
K
V/v/B/b
Press V/v/B/b to select the menu items.
Then press
Then press
to enter the selection.
L
OPTIONS
Press to display and select items from
option menus for receiver and DVD
player, Blu-ray Disc Player.
option menus for receiver and DVD
player, Blu-ray Disc Player.
TOOLS
Press to display and select items from the
option menus for DVD player or Blu-ray
Disc Player, etc.
option menus for DVD player or Blu-ray
Disc Player, etc.
M
MENU
Press to display the menu to operate the
audio/video components.
audio/video components.
SCREEN/
DSPL
CONTROL
DSPL
CONTROL
Press SHIFT (wj), then press MENU to
switch the display mode of the menu
between SCREEN (to display the menu
on the TV screen) and DSPL (to display
the menu in the display window).
switch the display mode of the menu
between SCREEN (to display the menu
on the TV screen) and DSPL (to display
the menu in the display window).
N B
·/·
b
Press to select the album.
O m
/
M
x
a)
X
a)
H
a) b)
.
/
>
a)
Press to operate the DVD player, Blu-ray
Disc Player, CD player, MD deck, tape
deck, or component connected to the
DIGITAL MEDIA PORT adapter etc.
Disc Player, CD player, MD deck, tape
deck, or component connected to the
DIGITAL MEDIA PORT adapter etc.
TUNING +/–
Press to select station.
P
PRESET
+
+
b)
/–
Press to register FM/AM Radio station or
to select preset stations.
to select preset stations.
TV CH +/–
Press TV (wk), then press TV CH+/
− to
operate the TV, satellite tuner, VCR, etc.
Q
F1/F2
Press TV (wk), then press F1 or F2 to
select a component to operate.
• HDD recorder
select a component to operate.
• HDD recorder
F1: HDD
F2: DVD player, Blu-ray Disc Player
F2: DVD player, Blu-ray Disc Player
• DVD/VHS combo player
F1: DVD player, Blu-ray Disc Player
F2: VHS
F2: VHS
MACRO1,
MACRO2
MACRO2
Press AMP (5), then press MACRO 1
or MACRO 2 to set up the macro function.
or MACRO 2 to set up the macro function.
TV/INPUT
Press TV/INPUT and TV (wk) at the
same time to select the input signal (TV
input or video input).
same time to select the input signal (TV
input or video input).
WIDE
Press repeatedly to select the wide picture
mode.
mode.
PIP
Press SHIFT (wj), then press PIP to
switch the image of the PIP (Picture in
Picture) window. The image will be
changed as follows. EXT VIDEO t
ZONE 2 VIDEO t OFF. You can swap
the position of the main screen and the
PIP window (swap) by pressing the
switch the image of the PIP (Picture in
Picture) window. The image will be
changed as follows. EXT VIDEO t
ZONE 2 VIDEO t OFF. You can swap
the position of the main screen and the
PIP window (swap) by pressing the
(qa). You can expand or shrink the
window using V/v (qa). You can also
change the window’s position using B/b
window using V/v (qa). You can also
change the window’s position using B/b
(qa).
Note
The HDMI video signals are not output
while the PIP window is displayed.
while the PIP window is displayed.
RESOLUTION
Press SHIFT (wj), then press
RESOLUTION repeatedly to change the
resolution of signals output from the
HDMI OUT or COMPONENT VIDEO
MONITOR OUT jack.
RESOLUTION repeatedly to change the
resolution of signals output from the
HDMI OUT or COMPONENT VIDEO
MONITOR OUT jack.
R
DVD/
TOP MENU,
MENU
TOP MENU,
MENU
Press to display the menus of the DVD
player on the TV screen. Then use
V/v/B/b and
player on the TV screen. Then use
V/v/B/b and
to perform a menu
operations.
NIGHT
MODE
MODE
Press AMP (5), then press NIGHT
MODE to activate the NIGHT MODE
function.
MODE to activate the NIGHT MODE
function.
INPUT
MODE
MODE
Press AMP (5), then press INPUT
MODE to select the input mode when
the same components are connected to
both digital and analog jacks.
MODE to select the input mode when
the same components are connected to
both digital and analog jacks.
SLEEP
Press SHIFT (wj), then press SLEEP to
activate the sleep timer function and the
duration which the receiver turns off.
activate the sleep timer function and the
duration which the receiver turns off.
TEST TONE
Press SHIFT (wj), then press TEST
TONE to output the test tone from each
speaker.
TONE to output the test tone from each
speaker.
S
MUTING
Press to turn off the sound temporarily.
Press the button again to restore the
sound.
Press the button again to restore the
sound.
T
MASTER
VOL +/–
VOL +/–
Press to adjust the volume level of all
speakers at the same time.
speakers at the same time.
TV VOL +/–
Press TV (wk), then press TV VOL +/
−
to adjust the volume level of the TV.
U
DISC SKIP
Press to skip a disc when using a
multi-disc changer.
multi-disc changer.
V
RETURN/
EXIT
EXIT
O
Press to return to the previous menu or
exit the menu while the menu or on-screen
menu or on-screen guide of the VCR,
DVD player, or satellite tuner is displayed
displayed on the TV screen.
exit the menu while the menu or on-screen
menu or on-screen guide of the VCR,
DVD player, or satellite tuner is displayed
displayed on the TV screen.
W
DISPLAY
Press to select information displayed in
the display window, TV screen of the
VCR, satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or MD deck.
the display window, TV screen of the
VCR, satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or MD deck.
Note
In the SCREEN mode, press the button to
display the menu on the TV screen.
display the menu on the TV screen.
a)
See the table for information on the buttons that you can
use to control each component.
use to control each component.
b)
The tactile dot is attached to these buttons (H, PRESET+).
Use as a mark of operation.
Use as a mark of operation.
Notes
•Some functions explained in this section may not work
depending on the model.
•The above explanation is intended to serve as an example
only. Therefore, depending on the component, the above
operation may not be possible or may operate differently
than described.
operation may not be possible or may operate differently
than described.
X
CLEAR
Press to
− clear a mistake when you press the
incorrect numeric button.
− return to continuous playback, etc.
of the satellite tuner or DVD player.
>10
Press to select
− track numbers over 10 of the VCR,
satellite tuner, CD player or MD deck.
− channel numbers of the Digital CATV
terminal.
D.TUNING
Press to enter direct tuning mode.
Y
2CH/
A.DIRECT
A.DIRECT
Press to select sound field or to switch
the audio of the selected input to analog
signal without any adjustment.
the audio of the selected input to analog
signal without any adjustment.
Z
A.F.D.
Press to select sound field.
wj
SHIFT
Press to light up the button. It changes
the remote button function to activate
the buttons with pink printing.
the remote button function to activate
the buttons with pink printing.
wk
TV
Press to enable the TV operation.
wl
RM SET UP
Press to set up the remote.
18
STR-DA5300ES
RM-AAU016
This remote can only be used to operate the
receiver. You can control the main functions of
the receiver with simple operations using this
remote.
receiver. You can control the main functions of
the receiver with simple operations using this
remote.
Name
Function
A ?
/
1
(on/
standby)
Press to turn a receiver on or off.
B
2CH/
A.DIRECT
A.DIRECT
Press to select sound field.
A.F.D.
MOVIE
MUSIC
C
SCREEN/
DSPL
CONTROL
DSPL
CONTROL
Press to switch the display
mode of the menu between
SCREEN (to display the menu
on the TV screen) and DSPL (to
display the menu in the display
window).
mode of the menu between
SCREEN (to display the menu
on the TV screen) and DSPL (to
display the menu in the display
window).
D
V/v/B/b
After pressing SCREEN/DSPL
CONTROL (3), press V/v/B/
b to select the menu item. Then
press
CONTROL (3), press V/v/B/
b to select the menu item. Then
press
to enter the selection.
E
OPTIONS
Press to display and select items
from option menus.
from option menus.
F
MENU
Press to display the menu to
operate the receiver.
operate the receiver.
G
DMPORT
Press to operate the component
connected to the DIGITAL
MEDIA PORT adapter.
connected to the DIGITAL
MEDIA PORT adapter.
N
Starts play.
x
Stops play.
./>
Skips tracks.
H
INPUT
SELECTOR
SELECTOR
Press to select the input source
to play back.
to play back.
I
MASTER
VOLUME +/–
VOLUME +/–
Press to adjust the volume level.
J
MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
temporarily. Press the button
again to restore the sound.
K
RETURN/
EXIT
EXIT
Press to return to the previous
menu or exit the menu.
menu or exit the menu.
L
DISPLAY
Press to select information
displayed in the display
window.
displayed in the display
window.
Note
In the SCREEN mode, press the
button to display the menu on
the TV screen.
button to display the menu on
the TV screen.
M
PIP
Press PIP to switch the image of
the PIP (Picture in Picture)
window. The image will be
changed as follows. EXT
VIDEO t ZONE 2 VIDEO
t OFF. You can swap the
position of the main screen and
the PIP window (swap) by
pressing the
the PIP (Picture in Picture)
window. The image will be
changed as follows. EXT
VIDEO t ZONE 2 VIDEO
t OFF. You can swap the
position of the main screen and
the PIP window (swap) by
pressing the
(4). You can
expand or shrink the window
using V/v (4). You can also
change the window’s position
using B/b (4).
using V/v (4). You can also
change the window’s position
using B/b (4).
Note
The HDMI video signals are not
output while the PIP window is
displayed.
output while the PIP window is
displayed.
Name
Function
STR-DA5300ES
19
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
Note 1: The process described in
can be performed in any order.
Note 2: Without completing the process described in
, the next process can not be performed.
SECTION 3
DISASSEMBLY
3-2. CASE
(Page 20)
3-4. D-CONNECT BOARD,
DSP BOARD,
DIGITAL BOARD,
CIS BOARD AND
CONTROL BOARD
(Page 21)
DIGITAL BOARD,
CIS BOARD AND
CONTROL BOARD
(Page 21)
3-7. S-VIDEO BOARD AND
A-VIDEO BOARD
(Page 22)
(Page 22)
3-8. FLI-1.8REG BOARD
AND ANALOG BOARD
(Page 23)
(Page 23)
3-9. POWER TRANSFORMER (T001),
E-VOL BOARD AND
MAIN BOARD
(Page 24)
MAIN BOARD
(Page 24)
SET
3-6. FRONT PANEL SECTION
(Page 22)
3-10. HEART SINK SECTION
(Page 25)
3-3. SP-TM BOARD,
TUNER (FM/AM)
(Page 20)
(Page 20)
3-5. D-VIDEO BOARD
(Page 21)
STR-DA5300ES
20
3-3. SP-TM BOARD, TUNER (FM/AM)
Note:
Follow the disassembly procedure in the numerical order given.
3-2. CASE
3
flat head screw
(TP)
(TP)
5
case
4
4
1
two screws
(BVST4
(BVST4
×
8 (for black),
BVTT4
×
8 (for silver))
2
two flat head screws
(TP)
(TP)
1
two screws
(BVST4
(BVST4
×
8 (for black),
BVTT4
×
8 (for silver))
4
tuner (FM/AM)
2
wire (flat type) (9 core)
(US and Canadian models),
wire (flat type) (11 core)
(AEP, Russian, Ukrainian, UK and
Chinese models) (tuner (FM/AM))
(US and Canadian models),
wire (flat type) (11 core)
(AEP, Russian, Ukrainian, UK and
Chinese models) (tuner (FM/AM))
6
8
SP-TM board
7
four connectors
(CX4101, CX4102
CX4103, CX4104)
(CX4101, CX4102
CX4103, CX4104)
5
two screws (BV/ring)
3
two screws
(BVTT2.6
(BVTT2.6
×
6)
1
clamp
1
clamp
1
clamp
Ver. 1.2
Click on the first or last page to see other STR-DA5300ES service manuals if exist.