Sony NWZ-F885 / NWZ-F886 / NWZ-F887 Service Manual ▷ View online
NWZ-F885/F886/F887
5
DESTINATION SETTING
When the MAIN board is replaced, you must perform the destina-
tion setting. Refer to following procedures, and do the work cor-
responding to “WALKMAN” repaired.
When the MAIN board is replaced, you must perform the destina-
tion setting. Refer to following procedures, and do the work cor-
responding to “WALKMAN” repaired.
1. PREPARATION OF DESTINATION SETTING
Prepare the following before checking service mode.
Prepare the following before checking service mode.
• Windows
PC
•
USB cable for the WM-PORT (accessory)
•
Destination setting tool (Except Chinese model)
• Newest
fi rmware update tool
Note: Confi rm the method of obtaining each tool to each service head-
quarters.
2. METHOD OF THE DESTINATION SETTING
Procedure:
1. On PC, refer to following procedures, and unzip the destina-
Procedure:
1. On PC, refer to following procedures, and unzip the destina-
tion setting tool corresponding to “WALKMAN” repaired, and
confi rm that the folder has been created.
confi rm that the folder has been created.
Destination
Tool name
AEP and UK
model
model
RegionChanger-NWZ-F880Series-0003-
relkey-20130710A.zip
relkey-20130710A.zip
E model
RegionChanger-NWZ-F880Series-0009-
relkey-20130710A.zip
relkey-20130710A.zip
Chinese model
(Not used)
East European
model
model
RegionChanger-NWZ-F880Series-0016-
relkey-20130710A.zip
relkey-20130710A.zip
Note 1: The destination setting of Chinese model is unnecessary. If it pro-
gresses to step 4, next please move on to step 12.
Note 2: Do not use the wrong fi le by any means.
2.
Connect PC and “WALKMAN” with the USB cable for the
WM-PORT (accessory).
USB cable
Plug in the USB cable
with facing upward,
making sure the
connection is secure.
with facing upward,
making sure the
connection is secure.
3. Confi rm that the USB connection screen is displayed on
“WALKMAN”, then confi rm that “USB storage in use” is dis-
played.
played.
Note 3: If the USB connection screen is not displayed, swipe the status bar
on the top of the screen then tap “USB connected” on the notifi ca-
tion panel.
tion panel.
USB storage in use
USB mass storage
6:09
Before turning off USB storage, unmount
(”ejecte”) your Android’s USB storage from
your computer.
Turn off USB storage
4. On PC, confi rm that “WALKMAN” drive has been recog-
nized.
(In this example, “WALKMAN” is recognized as F drive)
Note 4: When Windows XP is used, after recognizing a drive, the instal-
lation screen of a driver may be displayed. In that case, install a
driver according to screen.
driver according to screen.
Note 5: Chinese model is follow to next step 12.
5. On PC, open the folder created in step 1, and start “Digital
Player Software Update tool” by double-clicking “FWUpdat-
er.exe”.
er.exe”.
6. On PC, check into the [I agree] box on “Digital Player Soft-
ware Update tool”, and click the [Next] button.
Note 6: The language displayed in “Digital Player Software Update tool”
changes with linguistic environment of PC.
NWZ-F885/F886/F887
6
7. On PC, confi rm that all applications are terminated, and click
the [OK] button on “Digital Player Software Update tool”.
8. On PC, confi rm that the following screen is displayed, and
click the [OK] button on “Digital Player Software Update
tool”.
tool”.
9. On PC, wait for a while until progress will be 100%.
Note 7: “WALKMAN” is rebooted automatically.
10. On PC, confi rm that the following screen is displayed, and
click the [Finish] button on “Digital Player Software Update
tool”.
tool”.
Note 8: The contents which have failed in updating may be displayed,
but there is no problem.
11. Confi rm that the following screen is displayed on “WALK-
MAN”, and tap the [OK] button.
USB storage in use
USB mass storage
6:09
Before turning off USB storage, unmount
(”ejecte”) your Android’s USB storage from
your computer.
Turn off USB storage
System Update
Update to version NONE
completed successfully.
completed successfully.
OK
12. On PC, refer to following procedures, and unzip the newest
fi rmware update tool corresponding to “WALKMAN” re-
paired, and confi rm that the folder has been created.
paired, and confi rm that the folder has been created.
Destination
Tool name
Except Chinese
model
model
icx1237_002-F.1.00.00-user-relkey-
updater
updater
Chinese model
icx1237_005-F.1.00.00-user-relkey-
updater
updater
(The underline of the tool name shows the version)
13. On PC, open the folder created in step 12, and start “Digital
Player Software Update tool” by double-clicking “FWUpdat-
er.exe”.
er.exe”.
NWZ-F885/F886/F887
7
14. On PC, check into the [I agree] box on “Digital Player Soft-
ware Update tool”, and click the [Next] button.
Note 9: The language displayed in “Digital Player Software Update tool”
changes with linguistic environment of PC.
15. On PC, confi rm that all applications are terminated, and click
the [OK] button on “Digital Player Software Update tool”.
16. On PC, confi rm that the following screen is displayed, and
click the [OK] button on “Digital Player Software Update
tool”.
tool”.
The current software (Version=0.91) of the NWZ-F880Series(MSC) devide will be
17. On PC, wait for a while until progress will be 100%.
Note 10: “WALKMAN” is rebooted automatically.
The software of the NWZ-F880Series_0020(MSC) device will be updated from
Version=0.91 to Version=1.00.
Version=0.91 to Version=1.00.
The software of the NWZ-F880Series_0020(MSC) device will be updated from
Version=0.91 to Version=1.00.
Version=0.91 to Version=1.00.
18. On PC, confi rm that the following screen is displayed, and
click the [Finish] button on “Digital Player Software Update
tool”.
tool”.
Note 11: The contents which have failed in updating may be dis-
played, but there is no problem.
19. On PC, unmount the USB storage, and disconnect the USB
cable for the WM-PORT (accessory) from PC and “WALK-
MAN”.
MAN”.
20. Perform initialization by the following procedure.
Tap -
Tap -
[Settings] - [
Backup & reset] - [Factory data
reset] - [Reset device] - [Erase everything].
Your Walkman restarts automatically after being initialized.
NWZ-F885/F886/F887
8
21. Tap “ ” (Apps) on “WALKMAN”, and the list of applications
is displayed.
(The
following
fi gure is example of display)
22. Tap “Settings” icon.
(The display position in the following fi gure is an example)
23. Tap “About device” icon.
24. Confi rm that the last four digits of “Build number” are changed
into the value corresponding to “WALKMAN”.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
1.00.0003
Destination
Last four digits of
“Build number”
AEP and UK model
0003
E model
0009
Chinese model
0013
East European model
0016
Click on the first or last page to see other NWZ-F885 / NWZ-F886 / NWZ-F887 service manuals if exist.