Sony NWZ-F885 / NWZ-F886 / NWZ-F887 Service Manual ▷ View online
NWZ-F885/F886/F887
25
16. On PC, check into the [I agree] box on “Digital Player Soft-
ware Update tool”, and click the [Next] button.
Note 7: The language displayed in “Digital Player Software Update tool”
changes with linguistic environment of PC.
17. On PC, confi rm that all applications are terminated, and click
the [OK] button on “Digital Player Software Update tool”.
18. On PC, confi rm that the following screen is displayed, and
click the [OK] button on “Digital Player Software Update
tool”.
tool”.
The current software (Version=0.91) of the NWZ-F880Series(MSC) devide will be
19. On PC, wait for a while until progress will be 100%.
Note 8: “WALKMAN” is rebooted automatically.
The software of the NWZ-F880Series_0020(MSC) device will be updated from
Version=0.91 to Version=1.00.
Version=0.91 to Version=1.00.
The software of the NWZ-F880Series_0020(MSC) device will be updated from
Version=0.91 to Version=1.00.
Version=0.91 to Version=1.00.
20. On PC, confi rm that the following screen is displayed, and
click the [Finish] button on “Digital Player Software Update
tool”.
tool”.
Note 9: The contents which have failed in updating may be displayed,
but there is no problem.
21. On PC, unmount the USB storage, and disconnect the USB
cable for the WM-PORT (accessory) from PC and “WALK-
MAN”.
MAN”.
22. Perform initialization by the following procedure.
Tap -
Tap -
[Settings] - [
Backup & reset] - [Factory data
reset] - [Reset device] - [Erase everything].
Your Walkman restarts automatically after being initialized.
NWZ-F885/F886/F887
26
4. USING METHOD OF THE SERVICE MODE TOOL
4-1. GPS (Except Chinese model)
By displaying the receiving data of the satellite, the operation
check of the GPS sensor built in this unit can be performed.
4-1. GPS (Except Chinese model)
By displaying the receiving data of the satellite, the operation
check of the GPS sensor built in this unit can be performed.
Execution condition:
When the defect of GPS operation is suspected, be sure to perform
this mode.
When the defect of GPS operation is suspected, be sure to perform
this mode.
Note: Chinese model does not need to perform this mode.
Preparation:
•
•
Install the service mode tool in “WALKMAN” with reference
to “2. INSTALLING METHOD OF THE SERVICE MODE
TOOL” (page 21).
to “2. INSTALLING METHOD OF THE SERVICE MODE
TOOL” (page 21).
Note: “DiagTestMode” is used in this mode.
• Confi rm that the circumference is the environment of the
outdoors which the sky has opened.
Procedure:
1. Start “DiagTestMode” by tap the “DiagTestMode” icon.
1. Start “DiagTestMode” by tap the “DiagTestMode” icon.
(The display position in the following fi gure is an example)
2. Scroll the screen by fl icking.
END
10:10
ICX-1237
01.POWER
02.AUDIO
03.FM
04.NC
05.DIREC
08.VIDEO
09.OTHER
12.WIFI
3. Tap
“14.GPS”.
Note 1: Other items are not touching by any means.
When other items have been touched, tap the [BACK] button and
return to the following screen.
return to the following screen.
END
10:10
ICX-1237
08.VIDEO
09.OTHER
12.WIFI
13.BLUE TOOTH
14.GPS
15.G-SEN
16.NFC
17.USB
4. Tap
“01.GPS”.
BACK
10:10
14.GPS
01.GPS
5. Confi rm that the following screen is displayed, and wait for a
while.
(This operation may take about 30 seconds)
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
BACK
10:10
Latitude:
Longitude:
Altitude:
Speed:
PRN
SNR
Elevation Azimuth
Flags
Time:
TTFF:
Accuracy:
Bearing:
14.GPS : 01.GPS
6. In the column of “PRN”, “SNR”, “Elevation, “Azimuth” and
“Flags”, the appearing/disappearing of values are repeated.
Wait for a while in this state.
Wait for a while in this state.
(This operation may take about 5 minutes)
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
BACK
10:10
Latitude:
Longitude:
Altitude:
Speed:
PRN
SNR
Elevation Azimuth
Flags
Time:
TTFF:
Accuracy:
Bearing:
1
31.0
72.0
6.0
U
20
28.0
0.0
0.0
U
11
27.0
57.0
44.0
U
32
24.0
53.0
106.0
U
7
0.0
7.0
211.0
U
8
0.0
20.0
240.0
U
28
0.0
49.0
306.0
U
14.GPS : 01.GPS
NWZ-F885/F886/F887
27
7. Latitude/longitude informations (“Latitude” and “Longitude”,
etc.) are displayed, and positioning is completed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
BACK
10:10
Latitude:
Longitude:
Altitude:
Speed:
PRN
SNR
Elevation Azimuth
Flags
Time:
TTFF:
Accuracy:
Bearing:
1
31.0
72.0
6.0
U
20
28.0
0.0
0.0
U
11
27.0
57.0
44.0
U
32
24.0
53.0
106.0
U
7
0.0
7.0
211.0
U
8
0.0
20.0
240.0
U
28
0.0
49.0
306.0
U
40.6501547
125.7449772
0.1 m
0.1 m
Oct 5, 2013
150 sec
59.0 m
59.0 m
0.4 m/sec
14.GPS : 01.GPS
8. When at least one value of “30” or larger exists in the column
of “SNR”, it can be judged that GPS operation is normal.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
Note 2: The value of “SNR” is greatly dependent on the signal reception
environment from the GPS satellite.
When there is an obstacle in the direction of the sky, the value of
“SNR” falls.
“SNR” falls.
Do work, confi rming the signal reception environment.
BACK
10:10
Latitude:
Longitude:
Altitude:
Speed:
PRN
SNR
Elevation Azimuth
Flags
Time:
TTFF:
Accuracy:
Bearing:
1
31.0
72.0
6.0
U
20
28.0
0.0
0.0
U
11
27.0
57.0
44.0
U
32
24.0
53.0
106.0
U
7
0.0
7.0
211.0
U
8
0.0
20.0
240.0
U
28
0.0
49.0
306.0
U
40.6501547
125.7449772
0.1 m
0.1 m
Oct 5, 2013
150 sec
59.0 m
59.0 m
0.4 m/sec
14.GPS : 01.GPS
9. Return to the screen of step 3 by tapping the [BACK] button.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
BACK
10:10
Latitude:
Longitude:
Altitude:
Speed:
PRN
SNR
Elevation Azimuth
Flags
Time:
TTFF:
Accuracy:
Bearing:
1
31.0
72.0
6.0
U
20
28.0
0.0
0.0
U
11
27.0
57.0
44.0
U
32
24.0
53.0
106.0
U
7
0.0
7.0
211.0
U
8
0.0
20.0
240.0
U
28
0.0
49.0
306.0
U
40.6501547
125.7449772
0.1 m
0.1 m
Oct 5, 2013
150 sec
59.0 m
59.0 m
0.4 m/sec
14.GPS : 01.GPS
10. Return to the screen of step 3 by tapping the [BACK] button.
BACK
10:10
14.GPS
01.GPS
11. Return to the screen of step 1 by tapping the [END] button.
END
10:10
ICX-1237
08.VIDEO
09.OTHER
12.WIFI
13.BLUE TOOTH
14.GPS
15.G-SEN
16.NFC
17.USB
Notes after mode completion:
Note 1: After work is completed, uninstall the service mode tool abso-
lutely.
(Refer to “3. UNINSTALLING METHOD OF THE SERVICE
MODE TOOL” on page 23 about procedure)
Note 2: When this unit connects with some site in order to perform the
operation check (When the connection with WiFi and the opera-
tion check of browser, etc. are performed etc.), the WiFi setting
list and the history of browser, etc. remain on this unit.
tion check of browser, etc. are performed etc.), the WiFi setting
list and the history of browser, etc. remain on this unit.
In that case, perform reset and initialization with reference to
page 4.
(When initialization is performed, all user informations are
cleared)
NWZ-F885/F886/F887
28
4-2. FWVER
The fi rmware version of this unit, etc. can be confi rmed.
The fi rmware version of this unit, etc. can be confi rmed.
Preparation:
•
•
Install the service mode tool in “WALKMAN” with reference
to “2. INSTALLING METHOD OF THE SERVICE MODE
TOOL” (page 21).
to “2. INSTALLING METHOD OF THE SERVICE MODE
TOOL” (page 21).
Note: “DiagTestMode” is used in this mode.
Procedure:
1. Start “DiagTestMode” by tap the “DiagTestMode” icon.
1. Start “DiagTestMode” by tap the “DiagTestMode” icon.
(The display position in the following fi gure is an example)
2. Tap
“09.OTHER”.
Note 1: Other items are not touching by any means.
When other items have been touched, tap the [BACK] button and
return to the following screen.
END
10:10
ICX-1237
01.POWER
02.AUDIO
03.FM
04.NC
05.DIREC
08.VIDEO
09.OTHER
12.WIFI
3. Tap
“08.FWVER”.
Note 2: Other items are not touching by any means.
When other items have been touched, tap the [BACK] button and
return to the following screen.
return to the following screen.
BACK
10:10
09.OTHER
01.RTC
03.KEYNUM
04.TOUCH
05.FORMAT
08.FWVER
09.NCAPCHK
10.MULTIID
12.THERMO
4. The following screen is displayed, and “Build Version”, “Mod-
el Number” and “Device ID” can be confi rmed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
BACK
10:10
Build Version : 1.00.00.0020.0003
Model Number : WALKMAN
Model Number : WALKMAN
Device ID : 178263803700071
09.OTHER : 08.FWVER
5. Return to the screen of step 3 by tapping the [BACK] button.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
BACK
10:10
Build Version : 1.00.00.0020.0003
Model Number : WALKMAN
Model Number : WALKMAN
Device ID : 178263803700071
09.OTHER : 08.FWVER
6. Return to the screen of step 2 by tapping the [BACK] button.
BACK
10:10
09.OTHER
01.RTC
03.KEYNUM
04.TOUCH
05.FORMAT
08.FWVER
09.NCAPCHK
10.MULTIID
12.THERMO
Click on the first or last page to see other NWZ-F885 / NWZ-F886 / NWZ-F887 service manuals if exist.