Sony MDS-JA555ES Service Manual ▷ View online
21
4-5. Selecting the Test Mode
There are 31 types of the test mode. The group can be switched by rotating the lAMSL knob. Select the group to be used and press
the YES button. After each group is entered, each mode can be switched by rotating the lAMSL .
For the selected contents, refer to the “Group” column in the list.
The group S can support all test modes for servicing. Be careful not to select other groups if not necessary.
the YES button. After each group is entered, each mode can be switched by rotating the lAMSL .
For the selected contents, refer to the “Group” column in the list.
The group S can support all test modes for servicing. Be careful not to select other groups if not necessary.
•
For detailed description of each adjustment mode, refer to Section 5 “Electrical Adjustments”.
For “ERR DP MODE” (C17), refer to the self-diagnosis function of page 2.
For “ERR DP MODE” (C17), refer to the self-diagnosis function of page 2.
•
If a different adjustment mode has been selected by mistake, press the MENU/NO button to exit from it.
•
The items marked (
×
) in the mark are not used in servicing, therefore they are not detailed. . If select these modes accidentally, press the
MENU/NO button immediately to exit from it. If the items marked (!) are selected especially, the unit could be operated wrongly by
rewriting the contents of non-volatile memory. Be careful of it.
rewriting the contents of non-volatile memory. Be careful of it.
Display
TEMP CHECK
LDPWR CHECK
EF MO CHECK
EF CD CHECK
FBIAS CHECK
ScurveCHECK
VERIFYMODE
DETRK CHECK
TEMP ADJUS
LDPWR ADJUS
EF MO ADJUS
EF CD ADJUS
FBIAS ADJUS
EEP MODE
ERR DP MODE
ADJ CLEAR
AG Set (MO)
AG Set (CD)
Iop Read
Iop Write
JA555 @@@@@@
CPLAY MODE
CREC MODE
No.
C01
C02
C03
C04
C05
C06
C07
C08
C09
C10
C11
C12
C13
C14
C17
C24
C25
C26
C27
C28
C29
C30
C31
Contents
Temperature compensation offset check
Laser power check
Traverse (MO) check
Traverse (CD) check
Focus bias check
S curve check
Non-volatile memory check
Detrack check
Temperature compensation offset adjustment
Laser power adjustment
Traverse (MO) adjustment
Traverse (CD) adjustment
Focus bias adjustment
Non-volatile memory control
Error history display, clear
Initialization of non-volatile memory of adjustment value
Auto gain output level adjustment (MO)
Auto gain output level adjustment (CD)
IOP data display
IOP data writing
Version display of microprocessor
Continuous playback mode
Continuos recording mode
Mark
(
×
)
(
×
)
(
×
)
(
×
) (!)
Group (
*
)
C
S
C
S
C
S
C
S
C
S
C
C
C
A
S
A
S
A
S
A
S
A
S
D
S
A
S
A
S
A
S
C
S
A
S
C
S
C
A
S
D
C
A
S
D
(*) Group
C : Check
C : Check
A : Adjust
S : Service D : Develop
22
4-5-1. Operating the Continuos Playback Mode
1. Entering the continues playback mode
1) Load the disc into the unit. (recordable disc or disc for playback)
The disc is loaded by pushing the tray.
2) Rotate the lAMSL knob to display “CPLAY MODE” (C30).
3) Press the YES button to change the display to “CPLAY MID”.
4) When access completes, the display changes the display to “C = AD = ”.
Note
3) Press the YES button to change the display to “CPLAY MID”.
4) When access completes, the display changes the display to “C = AD = ”.
Note
: The value of the “ ” displayed on the screen indicates error rate and “ADER”.
2. Changing the parts to be played back
1) Press the YES button during continuos playback to change the display as shown and move the played back part.
2) When access completes, the display changes to “C = AD = ”.
Note
Note
: The value of the “ ” displayed on the screen indicates error rate and “ADER”.
3. Ending the continuos playback mode
1) Press the MENU/NO button to change the display to “CPLAY MODE”.
2) Press the A button to eject the disc.
Note1
2) Press the A button to eject the disc.
Note1
: The playback start addresses for IN, MID, and OUT are as follows.
IN
: 40h cluster
MID
: 300h cluster
OUT
: 700h cluster
Note 2 : When the
N
button is pressed during the continuos playback in order to switch the tracking servo ON and OFF, the message
“SERVO ON” appears without displaying “CPLAY MODE” when the MENU/NO button is pressed to end the continuos
playback mode.
Also when the servo is turned off, the servo is turned on automatically, the message “SERVO ON” appears and then the mode
ends afterward.
To change the display “SERVO ON” to the normal “mode” display, press the
playback mode.
Also when the servo is turned off, the servo is turned on automatically, the message “SERVO ON” appears and then the mode
ends afterward.
To change the display “SERVO ON” to the normal “mode” display, press the
x
button.
"CPLAY MID"
→
"CPLAY OUT"
→
"CPLAY IN"
23
REC
REC
REC
REC
4-5-2. Operating the Continuos Recording Mode (Use this mode for self record/playback check only)
1. Entering the continuos recording mode
1) Load the recordable disc to the unit.
The disc is loaded by pushing the tray.
2) Rotate the lAMSL knob to display “CREC MODE” (C31).
3) Press the YES button to change the display to “CREC MID”.
4) When access completes, the display changes the display to “CREC( ” and illuminates.
Note : The value of the “ ” displayed on the screen indicates the address of the recorded position.
3) Press the YES button to change the display to “CREC MID”.
4) When access completes, the display changes the display to “CREC( ” and illuminates.
Note : The value of the “ ” displayed on the screen indicates the address of the recorded position.
2. Changing the parts to be recorded
1) Press the YES button during continuos playback to change the display as shown and move the played back part. disappears
during moving.
2) When access completes, the display changes to “CREC( ” and disappears.
Note : The value of the “ ” displayed on the screen indicates the address of the recorded position.
Note : The value of the “ ” displayed on the screen indicates the address of the recorded position.
3. Ending the continuos recording mode
1) Press the MENU/NO button. The display changes to “CREC MODE” and disappears.
2) To eject the disc, press the A button.
Note 1 : The playback start addresses for IN, MID, and OUT are as follows.
2) To eject the disc, press the A button.
Note 1 : The playback start addresses for IN, MID, and OUT are as follows.
N
: 40h cluster
MID
: 300h cluster
OUT
: 700h cluster
Note 2 : The MENU/NO button can be used to stop recording anytime.
Note 3 : Do not perform continuos recording for long periods of time above 5 minutes.
Note 4 : During continuos recording, be careful not to apply vibration.
Note 3 : Do not perform continuos recording for long periods of time above 5 minutes.
Note 4 : During continuos recording, be careful not to apply vibration.
4-5-3. No-Volatile Memory Mode (EEP MODE)
This mode reads and writes the contents of the non-volatile memory.
It is not used in servicing. If selecting this mode accidentally, press the MENU/NO button immediately to exit it.
It is not used in servicing. If selecting this mode accidentally, press the MENU/NO button immediately to exit it.
4-6. Functions of Other Buttons
Function name
Main contents
N
Sets continuos playback when pressed in the STOP state. When pressed during continuos playback, the tracking
servo turns ON/OFF. *Note
servo turns ON/OFF. *Note
x
Stops continuos playback and continuous recording
M
The sled moves to the outer circumference only when this is pressed
m
The sled moves to the inner circumstance only when this is pressed
SCROLL
Switches between the pit and groove modes when pressed
PLAY MODE
Switches the spindle servo mode (CLV S
↔
CLV A)
DISPLAY/CHAR
Switches the display when pressed
A/OPEN/CLOSE
Removes the disc
REPEAT
Exits test mode
Note : If the continuos playback mode ends with the tracking servo OFF, the tracking servo is automatically turned on.
When the message “SERVO ON” appears at the end, press the x button to returns to the normal “mode” display.
"CREC MID"
→
"CREC OUT"
→
"CREC IN"
24
4-7. Test Mode Displays
Each time the DISPLAY/CHAR button is pressed, the display changes in the following order.
1. MODE display
Displays “TEMP CHECK”, “CPLAY MODE”, etc.
2. Error rate display
Error rates are displayed as follows.
C = AD =
C = Indicates CI error
AD = Indicates ADER
C = Indicates CI error
AD = Indicates ADER
3. Address display
Addresses are displayed as follows.
(MO: recordable disc, CD: disc for playback only)
Every pressing of the SCROLL button toggles between the groove display
and the pit display
(MO: recordable disc, CD: disc for playback only)
Every pressing of the SCROLL button toggles between the groove display
and the pit display
h = s = (MO pit and CD)
h = a = (MO groove)
h = : Indicates header address
s = : Indicates SUBQ address
a = : Indicates ADIP address
h = a = (MO groove)
h = : Indicates header address
s = : Indicates SUBQ address
a = : Indicates ADIP address
Note: The display “-” appears when the servo is not locked.
4. Auto gain display (not used in servicing)
4. Auto gain display (not used in servicing)
The auto gain display is shown as follows.
AG= / [
5. Detrack check display (not used in servicing)
The detrack check display is shown as follows.
ADR=
6. IVR display (not used in servicing)
The IVR display is shown as follows.
[ ] [ ] [
Meaning of Other Displays
MODE display
↓
Error rate display
↓
Address display
↓
Auto gain display (not used in servicing)
↓
Detrack check display (not used in servicing)
↓
IVR display (not used in servicing)
↓
Display
H
X
REC
-SYNC
A. SPACE
OVER
B
A-
TRACK
DISC
SLEEP
CLOCK
Contents
MODE display
Off
During continuos playback (CLV: ON)
STOP (CLV:OFF)
Tracking servo OFF
Tracking servo ON
Recording mode OFF
Recording mode OFF
CLV low speed mode
CLV normal mode
ABCD adjustment completed
Tracking offset cancel ON
Tracking offset cancel OFF
Tracking auto gain OK
Focus auto gain OK
Pit
Groove
High reflection
Low reflection
CLV-S
CLV-A
CLV LOCK
CLV UNLOCK
Click on the first or last page to see other MDS-JA555ES service manuals if exist.