DOWNLOAD Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL Service Manual ↓ Size: 13.7 MB | Pages: 127 in PDF or view online for FREE

Model
HBD-N5200W HBD-N7200W HBD-N7200WL HBD-N9200W HBD-N9200WL
Pages
127
Size
13.7 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
hbd-n5200w-hbd-n7200w-hbd-n7200wl-hbd-n9200w-hbd-n.pdf
Date
PREV: Sony BDV-N5200W Service Manual

Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL Service Manual ▷ View online

HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
41
 Diag
Category: 
Wireless LAN Test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[5]  Write P2P address to Registry
[6] P2P Registry Check
Ping To : 192.168.1.10
PING 192.168.1.10  OK!
HELP: [UP][DOWN][ENT][RET]
(Screen 5)
 Diag
Category: 
Wireless LAN Test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[6] P2P Registry Check
P2P device address : xx:xx:xx:xx:xx:xx
Status : Write Successful!
Status : Write Fail!     
HELP: [UP][DOWN][ENT][RET]
 Diag
Category: 
Wireless LAN Test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[5]  Write P2P address to Registry
P2P device address : xx:xx:xx:xx:xx:xx
HELP: [UP][DOWN][ENT][RET]
(Screen 6)
(Screen 7)
[4] Start Ping Test
[5]  Write P2P address to Registry
[6] P2P Registry Check
HELP: [UP][DOWN][ENT][RET]
(Screen 2)
(Screen 3)
(Screen 4)
(Screen 1)
 Diag
 Diag
Category: 
Wireless LAN Test
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[5]  Write P2P address to Registry
[6] P2P Registry Check
Serial: 200912313165535
Hard  : 22
Mac   : 00:01:36:23:FD:CF
 Diag
Category: WirelessLAN 
Test
[1] Show WLAN HwInfo
[3] Start Display RSSI Value
CERT   : NO-ENCRYPT
WEPKEY : abcdef1234
PMK    : ABCDE12345
SSID   : SONY-Test-R
IPADDR : 192.168.1.100
NETMASK: 255.255.255.0
BROADCAST : 192.168.1.10
Status : Connected!
HELP: [UP][DOWN][ENT][RET]
 Diag
Category: 
Wireless LAN Test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[4] Start Ping Test
[5]  Write P2P address to Registry 
[6] P2P Registry Check
RSSI Value  : 60
HELP: [UP][DOWN][ENT][RET]
Category: 
Wireless LAN Test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
42
(Screen 3)
 Diag
 Diag
Category:            Bluetooth Device Test
(2) Bluetooth Disable
(3) Write Bluetooth device address to Registry 
(4) Bluetooth Inquiry Test 
Status: Bluetooth Enable Successful!  
HELP: [UP] [DOWN] [ENT] [RET]
(Screen 1)
(Screen 2)
Category:            
Bluetooth Device Test
 
(1) Bluetooth Enable
Diag
Category:            Bluetooth Device Test
(3) Write Bluetooth device address to Registry 
(4) Bluetooth Inquiry Test 
Status: Bluetooth Disable Successful! 
HELP: [UP] [DOWN] [ENT] [RET]
(1) Bluetooth Enable
(2) Bluetooth Disable
(Screen 4)
Status: Write Successful! 
Diag
Category:            Bluetooth Device Test
(2) Bluetooth Disable
(3) Write Bluetooth device address to Registry 
(4) Bluetooth Inquiry Test 
Bluetooth Device address: A4:17:31:77:7E:7
HELP: [UP] [DOWN] [ENT] [RET]
(1) Bluetooth Enable
8.  Diag (MIC Test)
Note: Not used for the servicing.
9.  Diag (HDMI Input Test)
Note: Not used for the servicing.
10. Diag (Transcoder Test)
Note: Not used for the servicing.
11. Diag (Bluetooth Device Test)
This screen performs Bluetooth device test.
Screen 1: Selects the Bluetooth device test category
Operation:
[
<
]/[
,
] 
Selects the category
[
m
]/[
] 
Activate to the selected category
[RETURN]  Returns to the service top menu
Screen 2: Bluetooth device test
[1] Bluetooth Enable
[2] Bluetooth Disable
[3] Write Bluetooth device address to Registry
[4] Bluetooth Inquiry Test
Operation:
[
M]/[
m
] 
Selects the device
[
] 
Executes the test
[RETURN]  Returns to selection of test category
Screen 2: Select [1] Bluetooth Enable
• 
Viewing the status display
OK: “Bluetooth Enable Successful!” is displayed
NG: “Bluetooth Enable Fail!” is displayed
Screen 3: Select [2] Bluetooth Disable
• 
Viewing the status display
OK: “Bluetooth Disable Successful!” is displayed
NG: “Bluetooth Disable Fail!” is displayed
Screen 4: Select [3] Write Bluetooth device address to 
Registry
(Displayed characters/values in the following fi gure are example)
Bluetooth device address is displayed.
• 
Viewing the status display
OK: “Write Successful!” is displayed
NG: “Write Fail!” is displayed
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
43
12. Log: Error Log (Output of each Log)
This screen displays the contents of each log.
Note: Do not refer to the displayed date.
Screen 1: Selects log
Operation:
[1]/[
] 
Moves to the Error Log output screen
[RETURN]  Returns to the top menu of the service mode
Screen 2: Displays the Error Log
(Displayed characters/values in the following fi gure are example)
Operation:
[
<
] 
Returns to the previous page
[
,
] 
Moves to the next page
[RETURN] Returns to the screen (Screen 1) that selects the log 
type
[RED] 
Writes the log contents to an USB memory device
• 
Viewing the log display
Error Log:
 
[001] 2010/01/01 00:00:05 [ErrCode:0902A4053002]
 
[Index number] [Date] [Time] [Error code]
About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB 
memory device inserted into the unit.
Note: Don’t press the [RED] button immediately after USB memory is 
inserted. 
 
  Don’t pull out USB memory immediately after the [RED] button 
was pressed.
Error Log:
 When 
“getErrLogFile.trm 
fi le” exists in the USB memory de-
vice, errlog.log fi le is output.
 Select Log
HELP : [DOWN][ENT][(NUM)]
 Error Log
[000] 2010/01/01 00:00:00 [ErrCode:0A0100000000]
[001] 2010/01/01 00:00:05 [ErrCode:0902A4053002]
[002] 2010/01/01 00:00:04 [ErrCode:0902A4053002]
[003] 2010/01/01 00:00:06 [ErrCode:0902A4053002]
[004] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[005] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[006] 2010/01/01 00:00:05 [ErrCode:0902A4053002]
[007] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[008] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[009] 2010/01/01 00:00:05 [ErrCode:0902A4053002]
[010] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[011] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[012] 2010/01/01 00:00:06 [ErrCode:0902A4053002]
[013] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
                                                  <Page 1/3>
HELP : Press [RED] key to store log to Udisc.
:
:
[1] Error Log
[2] HDD Log
(Screen 1)
(Screen 2)
13. Log (HDD Log)
Note: Not used for the servicing.
14. Factory Initialize (Factory Settings)
There is a possibility that this mode cannot be correctly execut-
ed. Never use this mode.
15. Network (Network Test Diagnosis Screen: Ifconfi g)
Network menu for the wired ethernet.
Screen 1: Ifconfi g Test
Operation:
[
] Activate Ifconfi g (Display network setting)
[
,] 
Select ping test
[RETURN] Returns to the top menu of the service mode
Screen 2: Ping Test
Operation:
[
<
] Select 
Ifconfi g test
[RETURN]  Returns to the top menu of the service mode
(The details of a Ping test are “16. Network (Network Test Diag-
nosis Screen: Ping)”)
Screen 3: Ifconfi g Test Active
Display Ifconfi g command results.
(Displayed characters/values in the following fi gure are example)
Operation:
[
] Ifconfi g retry
[
,] Select 
Ping Test
[RETURN]  Returns to the top menu of the service mode
 Network
Test:          
Ifconfig
                Ping
HELP : [DOWN][ENT][(NUM)]
(Screen 1)
 Network
HELP : [DOWN][ENT][(NUM)]
 Network
(Screen 2)
(Screen 3)
Test:          Ifconfig                
Ping
[START]
Ping To:
IP:192. 168. 11. 2     MAC:00-16-01-85-21-A3
HELP : [ENT]: Re/Exe [RIGHT]
Test:          
Ifconfig
                Ping
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
44
16. Network (Network Test Diagnosis Screen: Ping)
Ping test for the wired ethernet.
Screen 1: Ping Test
Operation:
[
<
] Select 
Ifconfi g test
[
m
] 
Ping execution preparation
[RETURN]  Returns to the top menu of the service mode
Screen 2: The IP address of the Ping point is set up
 
(IP address input mode)
When “Ping to :>” is reversed, the [
] button is pressed and IP 
is inputted.
Operation:
[
] 
Finish to input
[RETURN]  Finish to input
[
<
] 
Finish to input and Select Ifconfi g Test
[0] to [9] 
Input Character sting ‘0-9’
Screen 3: Ping Test Active
When [START] is reversed, the [
] button is pressed and execute 
ping.
Operation:
[
] 
Activate ping test
[
M
] 
The IP address of the ping point is set up
[RETURN]  Returns to the top menu of the service mode
(Screen 1)
Test:
(Screen 2)
Ping
Network
Test: Ifconfig
Ping to :> 192. 168. 200. 13
[ENT] : Release
[RET] : Release
(Screen 3)
 Network
Ping to : 192. 168. 200. 13
[START]
HELP: [ENT] : Start [UP] [LEFT]
Ping
Ifconfig
Ping To :
[START]
 Network
Test: Ifconfig
PING 192. 168. 200. 13 OK!
Ping
17. System Information (System Information Display)
This screen displays system information.
Screen 1: Basic Information
Operation:
[
,
] 
Drive information (delta IOP of a drive is measured) 
and wireless device information displayed (go to 
Screen 2)
[RETURN]  Returns to the top menu of the service mode
Screen 2: Drive and Wireless Information Menu
Operation:
[
<
] 
Basic Information displayed (go to Screen 1)
[RETURN]  Returns to the top menu of the service mode
When delta IOP is measured, it becomes impossible to use the Ver-
sion Up function.
Contents List:
Main LSI name
Model
Destination
Sequence Number
MAC
IP
IF-con Block 
IF-con Block Version
IFCon ADSP Coeff  IFCon ADSP Coeff Version
Bootloader Bootloader 
Version
Host Main 
Host Main Version
MicroBE MicroBE 
Version
Host Sub 
Host Sub Version
Middleware Middleware 
Version
ADSP ADSP 
Version
ADSP Coeff 
ADSP Coeff Version
2nd DSP 
2nd DSP Version
ADSP ADSP 
Version
IF Model
IF Dest
WLAN module Serial
WLAN module hw Version
WLAN module MAC Address
Drive Firm Revision
CD DIOP 
Delta IOP
DVD DIOP 
Delta IOP
BD DIOP 
Delta IOP
CD LD TIME 
LD Time
DVD LD TIME  LD Time
BD LD TIME 
LD Time
Bluetooth Device Address
 System Information
Sequence Number :
MAC :
Model : 
Destination :
Main LSIname : 
IP :
IF-con Block0 Version :  
Block1 version :
IFCon ADSP Coeff Version :
Host Main Version :
Bootloader Version :
MicroBE Version :
Host Sub Version :
Middleware Version :
ADSP Version :
ADSP Coeff Version :
2nd DSP Version :
ADSP Version :
HELP: [RET] [RIGHT]
(Screen 1)
 System Information
DVD DIOP :
BD DIOP :
Drive Firm Revision : 
CD DIOP :
WLAN module MAC Address :
WLAN module Serial : 
WLAN module hw Version :
IF_MODEL :
IF_DEST :
CD LD TIME :
DVD LD TIME :
BD LD TIME :
Bluetooth  Device Address:
HELP: [RET] [LEFT]
(Screen 2)
Page of 127
Display

Click on the first or last page to see other HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL service manuals if exist.

RANDOM: