DOWNLOAD Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL Service Manual ↓ Size: 13.7 MB | Pages: 127 in PDF or view online for FREE

Model
HBD-N5200W HBD-N7200W HBD-N7200WL HBD-N9200W HBD-N9200WL
Pages
127
Size
13.7 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
hbd-n5200w-hbd-n7200w-hbd-n7200wl-hbd-n9200w-hbd-n.pdf
Date

Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL Service Manual ▷ View online

SERVICE MANUAL
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
US Model
HBD-N5200W/N7200W
Canadian Model
HBD-N9200W
AEP Model
HBD-N5200W/N7200W/N7200WL/
N9200W/N9200WL
UK Model
HBD-N5200W/N7200W/N7200WL
Russian Model
Australian Model
Chinese Model
Saudi Arabia Model
Taiwan Model
Thai Model
HBD-N9200W/N9200WL
E Model
HBD-N7200W/N9200W/N9200WL
Mexican Model
PX Model
HBD-N5200W
Singapore Model
HBD-N5200W/N9200W/N9200WL
HBD-N5200W/N7200W/N7200WL/
N9200W/N9200WL
BLU-RAY DISC
TM
/DVD RECEIVER
9-890-638-05
2014L80-1
© 
2014.12
Ver. 1.4  2014.12
•  HBD-N5200W is the Blu-ray disc
TM
/DVD receiver in BDV-N5200W.
•  HBD-N7200W is the Blu-ray disc
TM
/DVD receiver in BDV-N7200W.
•  HBD-N7200WL is the Blu-ray disc
TM
/DVD receiver in BDV-N7200WL.
•  HBD-N9200W is the Blu-ray disc
TM
/DVD receiver in BDV-N9200W.
•  HBD-N9200WL is the Blu-ray disc
TM
/DVD receiver in BDV-N9200WL.
•  In order to perform the operation checking, all the units contained in this unit are needed.
– Continued on next page –
SPECIFICATIONS
Model Name Using Similar Mechanism
NEW
Optical Device Name
KEM480AHA/C2RP1
US model only:
AUDIO POWER SPECIFICATIONS POWER
OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
 
 With 6 ohms loads, both channels 
driven, from 180 Hz – 20,000 Hz; rated 
70 watts per channel minimum RMS 
power, with no more than 1% total 
harmonic distortion from 250 milliwatts 
to rated output.
Other models:
POWER OUTPUT (rated)
Front L/Front R:
 
 125 W + 125 W (at 6 ohms, 1 kHz,
1% THD)
POWER OUTPUT (reference)
Front L/Front R:
 
200 W (per channel at 6 ohms, 1 kHz)
Center:
 
200 W (at 6 ohms, 1 kHz)
Subwoofer:
 
200 W (at 6 ohms, 80 Hz)
Inputs (Analog)
AUDIO IN
 
Sensitivity: 2 V/700 mV
Inputs (Digital)
TV (Audio Return Channel/OPTICAL)
 
Supported formats: LPCM 2CH
 
(up to 48 kHz), Dolby Digital, DTS
HDMI (IN 1)/HDMI (IN 2)
 
 Supported formats: LPCM 5.1CH (up 
to 48 kHz), LPCM 2CH (up to 96 kHz), 
Dolby Digital, DTS
HDMI Section
Connector
 Type 
(19pin)
BD/DVD/Super Audio CD/CD System
Signal format system
 
NTSC/PAL (AEP, AUS, E12, E3, EA, 
 
E32, MX, MX6, TW, E51, AR)
 
NTSC (US, CND, PX)
USB Section
 (USB) port:
 
 Type A (For connecting USB memory, 
memory card reader, digital still 
camera, and digital video camera)
LAN Section
LAN (100) terminal
 100BASE-TX 
Terminal
Wireless LAN Section
Standards Compliance
 
IEEE 802.11 a/b/g/n
Frequency band
 
2.4 GHz, 5 GHz
BLUETOOTH Section
Communication system
 
BLUETOOTH Specifi cation version 3.0
Output
 BLUETOOTH 
Specifi cation Power
 Class 
2
Maximum communication range
 
Line of sight approx. 10 m (33 ft)
1)
Frequency band
 2.4 
GHz
Modulation method
 
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profi les
2)
 
 A2DP 1.2 (Advanced Audio 
Distribution Profi le)
 
 AVRCP 1.3 (Audio Video Remote 
Control Profi le)
Supported Codecs
3)
 SBC
4)
, AAC
Transmission range (A2DP)
 
 20 Hz – 20,000 Hz (Sampling 
frequency 44.1 kHz, 48 kHz)
1)
 The actual range will vary depending on 
factors such as obstacles between devices, 
magnetic fi elds around a microwave oven, 
static electricity, cordless phone, reception 
sensitivity, antenna’s performance, operating 
system, software application, etc.
2)
 
 
BLUETOOTH standard profi les indicate the 
purpose of BLUETOOTH communication 
between devices.
3) 
Codec: Audio signal compression and 
conversion format
4)
Subband Codec
Photo: HBD-N9200WL
Photo: HBD-N9200W
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
2
FM Tuner Section
System
 
PLL quartz-locked digital synthesizer
Tuning range
 
87.5 MHz - 108.0 MHz (100 kHz step) (US, CND, PX models)
 
87.5 MHz – 108.0 MHz (50 kHz step) (other models)
Antenna (aerial)
 
FM wire antenna (aerial)
Antenna (aerial) terminals
 
75 ohms, unbalanced
General
Main unit
Power requirements
 
US, CND models:
 
120 V AC, 60 Hz
 TW 
model:
 
120 V AC, 50/60 Hz
 PX 
model:
 
110 V – 240 V AC, 50/60 Hz
 MX 
model:
 
120 V AC, 60 Hz
 
MX6, E32, E51 models:
 
110 V – 240 V AC, 50/60 Hz
 Other 
models:
 
220 V – 240 V AC, 50/60 Hz
Power consumption
 
On: 95 W (HBD-N9200W/
 HBD-N7200W/HBD-N5200W)
 105 
(HBD-N9200WL/
 HBD-N7200WL)
 Standby: 
0.3 
W
Dimensions (w/h/d) (approx.)
 
480 mm × 78 mm × 212.5 mm
 
(19 in x 3 
1
/
in x 8 
3
/
in) incl.
 projecting 
parts
Mass (approx.)
 
3.1 kg (6 lb 14 oz)
Design and specifi cations are subject to
change without notice.
• Abbreviation
 AR  : 
Argentina 
model
 AUS : 
Australian 
model
  CH 
: Chinese model
  CND  : Canadian model
  E3 
: 240 V AC area in E model
  E12 
: 220-240 V AC area in E model
  E32 
: 110-240 V AC area in E model
  E51 
: Chilean and Peruvian models
  EA 
: Saudi Arabia model
  MX 
: Mexican model
  MX6  : Latin-American model
  PX 
: PX model
  RU 
: Russian model
  SP 
: Singapore model
 TH  : 
Thai 
model
 TW  : 
Taiwan 
model
Copyrights and Trademarks
•  This system incorporates with Dolby* Digital and Dolby Pro Logic adaptive matrix surround 
decoder and the DTS** Digital Surround System.
 
*   Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D 
symbol are trademarks of Dolby Laboratories.
 
**  For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, 
& DTS and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All 
Rights Reserved.
•  This system incorporates High-Defi nition Multimedia Interface (HDMI™) technology.
 
The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are 
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other 
countries.
•  Java is a trademark of Oracle and/or its affi liates.
•  DVD Logo is a trademark of DVD Format/Logo Licensing Corporation.
•  “Blu-ray Disc”, “Blu-ray”, “Blu-ray 3D”, “BD-LIVE”, “BONUSVIEW”, and logos are 
trademarks of the Blu-ray Disc Association.
•  “Blu-ray Disc”, “DVD+RW”, “DVD-RW”, “DVD+R”, “DVD-R”, “DVD VIDEO”, and “CD” 
logos are trademarks.
•  “Super Audio CD” is a trademark.
•  App Store is a service mark of Apple Inc.
•  “BRAVIA” is a trademark of Sony Corporation.
•  “AVCHD 3D/Progressive” and the “AVCHD 3D/Progressive” logo are trademarks of Panasonic 
Corporation and Sony Corporation.
• 
, “XMB”, and “xross media bar” are trademarks of Sony Corporation and Sony Computer 
Entertainment Inc.
•  “Playstation” is a registered trademark of Sony Computer Entertainment Inc.
•  “Sony Entertainment Network” logo and “Sony Entertainment Network” are trademarks of Sony 
Corporation.
•  Music and video recognition technology and related data are provided by Gracenote
®
. Gracenote 
is the industry standard in music recognition technology and related content delivery. For more 
information, please visit www.gracenote.com.
 
CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright 
© 2000-present Gracenote. Gracenote Software, copyright © 2000-present Gracenote. One 
or more patents owned by Gracenote apply to this product and service. See the Gracenote 
website for a nonexhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, 
the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either a registered 
trademark or a trademark of Gracenote, Inc. in the United States and/or other countries.
• Wi-Fi
®
, Wi-Fi Protected Access
®
 and Wi-Fi Alliance
®
 are registered trademarks of Wi-Fi 
Alliance.
•  Wi-Fi CERTIFIED™, WPA™, WPA2™, Wi-Fi Protected Setup™, Miracast™ and Wi-Fi 
CERTIFIED Miracast™ are trademarks of Wi-Fi Alliance.
•  The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and 
in other countries.
•  Android™ is a trademark of Google Inc.
•  Google Play™ is a trademark of Google Inc.
•  “Xperia” is a trademark of Sony Mobile Communications AB.
• The 
Bluetooth
®
 word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. 
and any use of such marks by Sony Corporation is under license. Other trademarks and trade 
names are those of their respective owners.
•  MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and 
Thomson.
•  This product incorporates proprietary technology under license from Verance Corporation and 
is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending 
as well as copyright and trade secret protection for certain aspects of such technology. Cinavia 
is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights 
reserved by Verance. Reverse engineering or disassembly is prohibited.
•  Windows Media is either a registered trademark or trademark of Microsoft Corporation in the 
United States and/or other countries.
 
This product is protected by certain intellectual property rights of Microsoft Corporation. Use 
or distribution of such technology outside of this product is prohibited without a license from 
Microsoft or an authorized Microsoft subsidiary.
  Content owners use Microsoft PlayReady™ content access technology to protect their 
intellectual property, including copyrighted content. This device uses PlayReady technology to 
access PlayReady-protected content and/or WMDRM-protected content. If the device fails to 
properly enforce restrictions on content usage, content owners may require Microsoft to revoke 
the device’s ability to consume PlayReady-protected content. Revocation should not affect 
unprotected content or content protected by other content access technologies. Content owners 
may require you to upgrade PlayReady to access their content. If you decline an upgrade, you 
will not be able to access content that requires the upgrade.
•  DLNA™, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or 
certifi cation marks of the Digital Living Network Alliance.
• Opera
®
 Devices SDK from Opera Software ASA. Copyright 1995-2013 Opera Software ASA. 
All rights reserved.
•  All other trademarks are trademarks of their respective owners.
•  Other system and product names are generally trademarks or registered trademarks of the 
manufacturers. ™ and ® marks are not indicated in this document.
Ver. 1.3
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
3
CAUTION
Use of controls or adjustments or performance of procedures 
other than those specifi ed herein may result in hazardous radia-
tion exposure.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, 
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE  TEST
The AC leakage from any exposed metal part to earth ground and 
from all exposed metal parts to any exposed metal part having a 
return to chassis, must not exceed 0.5 mA (500 microamperes.). 
Leakage current can be measured by any one of three methods.
1.  A commercial leakage tester, such as the Simpson 229 or RCA 
WT-540A. Follow the manufacturers’ instructions to use these 
instruments.
2.  A battery-operated AC milliammeter. The Data Precision 245 
digital multimeter is suitable for this job.
3.  Measuring the voltage drop across a resistor by means of a 
VOM or battery-operated AC voltmeter. The “limit” indication 
is 0.75 V, so analog meters must have an accurate low-voltage 
scale. The S pson 250 and Sanwa SH-63Trd are examples of a 
passive VOM that is suitable. Nearly all battery operated digi-
tal multimeters that have a 2 V AC range are suitable. (See Fig. 
A)
1.5 k
Ω
0.15 
μF
AC
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Earth Ground
Fig. A.  Using an AC voltmeter to check AC leakage.
NOTES  ON  CHIP  COMPONENT  REPLACEMENT
• 
Never reuse a disconnected chip component.
• 
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
Pick-up unit of this appliance is 
classified as a CLASS 3R LASER product. 
Visible and invisible laser radiation is 
emitted when the laser protective 
housing is opened, so be sure to avoid 
direct eye exposure.
This marking is located on the bottom 
exterior of the main unit.
This appliance is classified as a CLASS 1 
This appliance is classified as a CLASS 1
LASER product by IEC60825-1:2007. This
marking is located on the bottom
exterior of the main unit.
LASER product. This marking is located 
on the bottom exterior of the main unit.
Ver. 1.4
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
4
1. 
SERVICING  NOTES 
 .............................................  
5
2. DISASSEMBLY
2-1. Disassembly 
Flow 
...........................................................  15
2-2. Cover 
(Top) 
.....................................................................  16
2-3.  TOUCH_F Board, TOUCH_S Board Block ...................   17
2-4.  Inner Door Block ............................................................   18
2-5. Cover 
(Bu 
Top) 
...............................................................  19
2-6. Loading 
Assy 
Block 
........................................................  20
2-7.  Optical Device Block ......................................................   21
2-8.  Flexible Flat Cable (45 Core), 
Wire (Flat Type) (9 Core), Wire (Flat Type) (5 Core) ....   22
2-9.  Optical Device KEM480AHA/C2RP1 (OP1) ................   23
2-10.  Cover (Bottom) Block ....................................................   24
2-11.  WLAN/BT Combo Card .................................................   25
2-12. FL+CHUKEI Board ........................................................   25
2-13.  RF Modulator (WS001) ..................................................   26
2-14.  LED CHUKEI Board ......................................................   26
2-15. FUSB+SIRCS Board ......................................................   27
2-16.  AUDIO IO Board ............................................................   27
2-17.  Shield (Power) Block ......................................................   28
2-18. MB1305 Board ...............................................................   29
2-19. DC Fan ............................................................................   30
2-20. Power Cord .....................................................................   30
2-21. AMP Board .....................................................................   31
2-22. Switching Regulator .......................................................   32
2-23.  How To Bend FFC ..........................................................   33
3. 
TEST  MODE 
 ............................................................   35
4. 
ELECTRICAL  CHECK 
 .........................................   46
5. TROUBLESHOOTING 
 ..........................................   47
6. DIAGRAMS
6-1.  Block Diagram - SERVO Section - ................................   51
6-2.  Block Diagram - MEMORY Section - ............................   52
6-3.  Block Diagram - MAIN Section - ...................................   53
6-4.  Block Diagram - AMP Section - .....................................   54
6-5.  Block Diagram - POWER SUPPLY Section - ................   55
6-6. Printed 
Wiring 
Board
 
- MB1305 Board (Component Side) - ............................   57
6-7. Printed 
Wiring 
Board
 
- MB1305 Board (Conductor Side) - ..............................   58
TABLE  OF  CONTENTS
6-8.  Schematic Diagram - MB1305 Board (1/9) - .................   59
6-9.  Schematic Diagram - MB1305 Board (2/9) - .................   60
6-10.  Schematic Diagram - MB1305 Board (3/9) - .................   61
6-11.  Schematic Diagram - MB1305 Board (4/9) - .................   62
6-12.  Schematic Diagram - MB1305 Board (5/9) - .................   63
6-13.  Schematic Diagram - MB1305 Board (6/9) - .................   64
6-14.  Schematic Diagram - MB1305 Board (7/9) - .................   65
6-15.  Schematic Diagram - MB1305 Board (8/9) - .................   66
6-16.  Schematic Diagram - MB1305 Board (9/9) - .................   67
6-17. Printed Wiring Board
 
- AMP Board (Component Side) - ..................................   68
6-18. Printed Wiring Board
 
- AMP Board (Conductor Side) - ....................................   69
6-19.  Schematic Diagram - AMP Board (1/2) - .......................   70
6-20.  Schematic Diagram - AMP Board (2/2) - .......................   71
6-21.  Printed Wiring Board - AUDIO IO Board - ....................   72
6-22.  Schematic Diagram - AUDIO IO Board - ......................   73
6-23.  Printed Wiring Board - FL+CHUKEI Board - ................   74
6-24.  Schematic Diagram - FL+CHUKEI Board - ..................   75
6-25.  Printed Wiring Board - TOUCH_F Board - ....................   76
6-26.  Schematic Diagram - TOUCH_F Board -.......................   77
6-27.  Printed Wiring Board - LED CHUKEI Board - ..............   78
6-28.  Schematic Diagram - LED CHUKEI Board - ................   79
6-29.  Printed Wiring Board - TOUCH_S Board - ....................   80
6-30.  Schematic Diagram - TOUCH_S Board -.......................   80
6-31.  Printed Wiring Board - FUSB+SIRCS Board - ..............   81
6-32.  Schematic Diagram - FUSB+SIRCS Board - .................   81
6-33.  Printed Wiring Board - POWER KEY Board -...............   82
6-34.  Schematic Diagram - POWER KEY Board - .................   82
7. 
EXPLODED  VIEWS
7-1.  Cover (Top) Section ........................................................  108
7-2.  TOUCH_F Board, TOUCH_S Board Section ................  109
7-3.  Mechanism Deck Section ...............................................  110
7-4.  Optical Device KEM480AHA/C2RP1 (OP1) Section ...  111
7-5.  Cover (Bottom) Section ..................................................  112
7-6.  Shield (Power) Section ...................................................  113
7-7.  MB1305 Board Section ..................................................  114
7-8.  Switching Regulator Section ..........................................  115
8. 
ELECTRICAL  PARTS  LIST 
 ..............................  116
SAFETY-RELATED  COMPONENT  WARNING!
COMPONENTS  IDENTIFIED  BY  MARK  
0  OR  DOTTED  LINE  
WITH  MARK  
0  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS 
 
WHOSE  PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  
MANUAL  OR  IN  SUPPLEMENTS  PUBLISHED  BY  SONY.
ATTENTION  AU  COMPOSANT  AYANT  RAPPORT  
À  LA  SÉCURITÉ!
LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  
0  SUR  
LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE  DES  
PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ  DE  FONC-
TIONNEMENT.  NE  REMPLACER  CES  COMPOSANTS  QUE  
PAR  DES  PIÈCES  SONY  DONT  LES  NUMÉROS  SONT  DON-
NÉS  DANS  CE  MANUEL  OU  DANS  LES  SUPPLÉMENTS  
PUBLIÉS  PAR  SONY.
Ver. 1.1
Page of 127
Display

Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL Service Manual ▷ Download

  • DOWNLOAD Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL Service Manual ↓ Size: 13.7 MB | Pages: 127 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL in PDF for free, which will help you to disassemble, recover, fix and repair Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL Audio. Information contained in Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.