Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL Service Manual ▷ View online
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
21
2-7. OPTICAL DEVICE BLOCK
6 wire (flat type)
(9
(9
core)
3 flexible flat cable (45 core)
guide line (concave edge)
5 Remove the
device,
device,
optical
block in the direction
of an arrow.
7 device, optical
block
block
4 three screws (S), float
1 sheet, OP
Note
Note
1: sheet, OP is not reused.
2 cushion, OP
Note
Note
5: cushion, OP is not reused.
cushion, OP
support board
(blue color portion)
(blue color portion)
Note 3: Make sure that the cover, OP,
cushion, OP and connector are hidden.
Note 6: Make sure that the
support board is hidden.
cover, OP
OP sheet
Note 2: Make sure that it is
Note 2: Make sure that it is
not float or bent.
Note 4: Make sure that flexible
flat cable is not bent.
cushion, OP
connector
cushion, OP
cushion, OP
support board
(blue color portion)
(blue color portion)
OK
NG
Note 7: When installing the flexible flat cable and wire (flat type),
ensure the colored line. No slanting after insertion.
colored line
colored line
Inserting is straight to the interior.
Inserting is slant.
flexible flat cable,
wire (flat type)
wire (flat type)
flexible flat cable,
wire (flat type)
wire (flat type)
connector
connector
OK
NG
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
22
2-8. FLEXIBLE FLAT CABLE (45 CORE), WIRE (FLAT TYPE) (9 CORE),
WIRE (FLAT TYPE) (5 CORE)
flexible flat cable
(45 core)
(45 core)
wire (flat type)
(9 core)
(9 core)
– Loading assy block top view –
8 two claws
– Loading assy block bottom view –
– Loading assy block bottom view –
1 tape, non halogene
tape, non halogene
2 three
claws
claws
4 two claws
5 claw
0 claw
3 wire (flat type) (5 core)
qs flexible flat cable (45 core)
No slanting
No slanting
:LUHVHWWLQJ
:LUHVHWWLQJ
qa Draw out the flexible flat cable (45 core)
7 wire (flat type) (9 core)
9 two claws
6 Draw out the wire (flat type) (9 core)
colored line
colored line
Inserting is straight to the interior.
Inserting is slant.
flexible flat cable,
wire (flat type)
wire (flat type)
flexible flat cable,
wire (flat type)
wire (flat type)
connector
connector
OK
NG
Note: When installing the flexible flat cable and
wire (flat type), ensure the colored line.
No slanting after insertion.
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
23
2-9. OPTICAL DEVICE KEM480AHA/C2RP1 (OP1)
Note: When the device, optical KEM480AHA/C2RP1 (OP1) is replaced, refer to
“NOTE OF REPLACING THE OPTICAL DEVICE KEM480AHA/C2RP1
(OP1) AND THE COMPLETE MB1305 BOARD” on page 9.
(OP1) AND THE COMPLETE MB1305 BOARD” on page 9.
1 two screws
(0 + P P1.7
u 5)
1 two screws
(0 + P P1.7
u 5)
2 cover, BU
3 three claws
3 two claws
5 insulator
5 insulator
5 insulator
5 insulator
6 device, optical
KEM480AHA/C2RP1
KEM480AHA/C2RP1
(OP1)
4 cover, OP
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
24
2-10. COVER (BOTTOM) BLOCK
2 CN1003 (2P)
1 tape
3 Remove the wires
from
from
clip.
7 Remove the chassis block
in the direction of an arrow.
8 Draw out the power cord
chassis block
9 cover (bottom)
clip
POWER KEY board
tape
:LUHVHWWLQJ
:LUHVHWWLQJ
4 nine screws
(+BV3
(+BV3
(3-CR))
5 four screws
(+BV3
(+BV3
(3-CR))
6 cover (USB)
front side
front side
Click on the first or last page to see other HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL service manuals if exist.