Sony HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL Service Manual ▷ View online
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
37
BD SERVICE MODE
Note: The operation in this mode must use a remote commander and TV
monitor.
Setting method of the BD service mode:
1. Connect this unit with TV monitor.
2. Press the [
1. Connect this unit with TV monitor.
2. Press the [
?/1
] button to turn the power on.
3. Press button in order of the [x]
[DISPLAY] [X] [M]
on the remote commander.
(Make the interval when each button is pressed within two
seconds)
seconds)
4. Enter the BD service mode. The OSD menu on TV monitor
can be operated by remote commander.
1. Main
Functions
• Diag
Performs unit test of devices installed on the board.
• Log
Error log is displayed. Displayed contents can also be saved in
an USB memory device.
an USB memory device.
• Factory
Initialize
Restores the unit to its factory settings.
• Network
Checks the wired network connection.
• Version
Up
Not
used.
• System
Information
Displays the system information of the unit.
Displays information such as the software version, drive infor-
mation, etc.
mation, etc.
• EMC
Test
Mode
Not
used.
• Drive
Write drive OP data and check drive.
• HDD
mode
Not
used.
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
38
2. Menu
Tree
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD Mode
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD Mode
Version Up
Not used
Not used
System Information
Displays system information
Displays system information
Factory Initialize
,QLWLDOL]HGHIDXOWVHWWLQJ
,QLWLDOL]HGHIDXOWVHWWLQJ
Log
'isplays Error Log
'isplays Error Log
Error Log
Displays error log
Diag
Network
1Htwork diagnosis for wired
1Htwork diagnosis for wired
Ping
Ifconfig
View network status
Confirm network connection
HDD log
Device Test
86%WHVW
86%WHVW
Video Test
Video output test
Video output test
Audio Test
Audio output test
Audio output test
Audio Input Test
Audio input test
Audio input test
Wireless LAN Test
Wireless LAN test
Wireless LAN test
EMC Test Mode
Not used
Not used
Drive
Write drive OP data and check drive
Write drive OP data and check drive
HDD Mode
Not used
Not used
Start Update
Not used
Start Initialize
Initialize default setting for the unit
'LDJ7HVW
Transcoder Test
Not used
Not used
HDMI Input Test
Not used
Not used
%OXHWRRWK'HYLFH7HVW
%OXHWRRWKGHYLFHWHVW
%OXHWRRWKGHYLFHWHVW
Mic Test
Not used
Not used
Not used
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
39
3. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
Moves to Diag screen
[2]
Moves to Log screen
[3]
Moves to Factory Initialize screen
[4]
Moves to Network screen
[5]
Moves to Version Up (DISC version update) screen
(Not
used)
[6]
Moves to System Information screen
[7]
Moves to EMC test mode screen (Not used)
[8]
Moves to Drive screen
[9]
Moves to HDD mode (Not used)
[
M
]/[
m
] Moves the cursor
[
]
Moves to the screen of the item selected with the cursor
* Cursor is not displayed when the menu is fi rst displayed.
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD mode
HELP : [UP] [DOWN] [ENT] [NUM]
HELP (currently available keys, etc.) is displayed
[1] Diag
4. Diag (Device Test)
This screen is used to test devices mounted on the board.
This screen is used to test devices mounted on the board.
Screen 1: Selects the test category
Operation:
[
Operation:
[
<
]/[
,
]
Selects the category
[
m
]/[
]
Moves to the selected category
[RETURN] Returns to the service top menu
Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
<
]/[
,
]
Selects the device to test
[
]
Executes the test
[
M]
Returns to selection of test category
[RETURN] Returns to selection of test category
•
List of test categories
Device Test
Video Test
Audio Test
Audio Input Test
Wireless LAN Test
Mic Test (not used)
HDMI Input Test
Transcoder Test (not used)
Bluetooth Device Test
Video Test
Audio Test
Audio Input Test
Wireless LAN Test
Mic Test (not used)
HDMI Input Test
Transcoder Test (not used)
Bluetooth Device Test
Diag
Category:
Diag
Category: Device Test
Device:
Device:
Front USB Media check ...
[ENT] Test Start
HELP: [RIGHT] [UP] [ENT] [RET]
USB Host
Device Test
(Screen 1)
(Screen 2)
•
Device test : List of devices
USB HOST
: USB media check. Only one time.
D/A Converter : Not used in this unit.
Ifcon
Ifcon
: Not used in this unit.
MIC
: Not used in this unit.
MFI
: Not used in this unit.
IPC
: Not used in this unit.
External HDMI : Not used in this unit.
Transcorder
Transcorder
: Not used in this unit.
5. Diag (Video/Audio Test)
This screen performs video and audio tests.
This screen performs video and audio tests.
Screen 1: When video test category is selected
Operation:
[
Operation:
[
]
Shows/hides the color bar
[
M
]/[RETURN] Returns to the selection of test category
Screen 2: When audio test category is selected
Operation:
[
Operation:
[
]
Plays back/stops the tone sound
[
M
]/[RETURN] Returns to the selection of test category
• Video
test:
Outputs a color bar (HDMI).
• Audio
test:
TONE sound output (speaker & HDMI).
Diag
Category: Video Test
HELP: [UP][ENT][RET]
Diag
Category: Audio Test
HELP: [UP] [ENT] [RET]
[ENT] Show Color Bar
[ENT] Generate TONE Sound
(Screen 1)
(Screen 2)
HBD-N5200W/N7200W/N7200WL/N9200W/N9200WL
40
6. Diag (Audio Input Test)
This screen performs audio input test.
This screen performs audio input test.
Screen 1: Selects the audio input test category
Operation:
[
Operation:
[
<
]/[
,
]
Selects the category
[
m
]/[
]
Activate to the selected category
[RETURN] Returns to the service top menu
Screen 2: Select input device
After “Audio Input Test” selects in screen 1, the device to test is
chosen.
Operation:
[
After “Audio Input Test” selects in screen 1, the device to test is
chosen.
Operation:
[
M]/[
m
]
Selects the device
[
]
Start and stop the test
[RETURN] Returns to selection of test category
Screen 3: Select Digital Input 1
Operation:
[
Operation:
[
M]/[
m
] Select
Test
[
]
Activate and Start/Stop Input Sound
[RETURN] Return to audio input test
•
Device test : Device List
Digital input 1 : IC101 (MB1305 board) is inputted from optical.
Digital input 2 : IC101 (MB1305 board) is inputted from ARC.
Analog input
Digital input 2 : IC101 (MB1305 board) is inputted from ARC.
Analog input
: IC101 (MB1305 board) is inputted from audio.
•
Audio input test:
IC101 (MB1305 board) is inputted from DIR/analog and outputs
line-out (8 ch) L and R.
Check tone sound by speaker connected with line-out (8 ch) L and
R.
(Input: LPCM 48 kHz (2 ch))
line-out (8 ch) L and R.
Check tone sound by speaker connected with line-out (8 ch) L and
R.
(Input: LPCM 48 kHz (2 ch))
Diag
HELP: [UP] [DOWN] [ENT] [RET]
Category :
Audio Input Test
c Digital Input 1
[2] Coaxial Test
[ENT]Stop Input Sound
[1] TV Test (OPT)
Note: The [2] Coaxial Test is not used for this model.
Diag
Category:
Category:
HELP: [UP] [DOWN] [ENT] [RET]
Audio Input Test
(Screen 1)
[ ]
[ ]
(Screen 3)
Diag
Device:
[ENT] Start Input Sound
HELP: [UP] [DOWN] [ENT] [RET]
Digital Input 2
Analog Input
Analog Input
(Screen 2)
Diag
HELP: [UP] [DOWN] [ENT] [RET]
Category :
Audio Input Test
c Digital Input 1
[2] Coaxial Test
[ENT]Start Input Sound
Category:
Audio Input Test
Digital Input 1
[1] TV Test (OPT)
7. Diag (Wireless LAN Test)
This screen performs wireless LAN test.
This screen performs wireless LAN test.
Screen 1: Selects the wireless LAN test category
Operation:
[
Operation:
[
<
]/[
,
]
Selects the category
[
m
]/[
]
Moves to the selected category
[RETURN] Returns to the service top menu
Screen 2: Wireless LAN test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[5] Write P2P address to Registry
[6] P2P Registry Check
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[5] Write P2P address to Registry
[6] P2P Registry Check
Operation:
[
[
M]/[
m
]
Selects the device
[
]
Executes the test
[RETURN] Returns to selection of test category
Screen 2: Select [1] Show WLAN HwInfo
(Displayed characters/values in the following fi gure are example)
•
(Displayed characters/values in the following fi gure are example)
•
Viewing the display
Serial : Serial number
Hard
Hard
: Hardware version
Mac
: Mac address
Screen 3: Select [2] Connect to AccessPoint
Connect access point only with the following AP settings.
CERT :
Connect access point only with the following AP settings.
CERT :
NO-ENCRYPT
WEPKEY :
abcdef1234
PMK :
ABCDE12345
SSID :
SONY-Test-R
IPADDR :
192.168.1.100
NETMASK :
255.255.255.0
BROADCAST :
192.168.1.10
When connect to AP, Status is “Connected!”
When cannot connect to AP, Status is “can’t Connect!”
When cannot connect to AP, Status is “can’t Connect!”
Screen 4: Select [3] Start Display RSSI Value
(Displayed characters/values in the following fi gure are example)
RSSI value is displayed.
(Displayed characters/values in the following fi gure are example)
RSSI value is displayed.
Screen 5: Select [4] Start Ping Test
Ping test is executed (IP address use the value of “192.168.1.10”).
OK: “192.168.1.10 OK!” is displayed
NG: “192.168.1.10 failed!” is displayed
Ping test is executed (IP address use the value of “192.168.1.10”).
OK: “192.168.1.10 OK!” is displayed
NG: “192.168.1.10 failed!” is displayed
Screen 6: Select [5] Write P2P address to Registry
•
•
Viewing the display
P2P device address : xx:xx:xx:xx:xx:xx
When write P2P address to registry is OK: “Write Successful!” is
displayed
When write P2P address to registry is NG: “Write Fail!” is displayed
When write P2P address to registry is OK: “Write Successful!” is
displayed
When write P2P address to registry is NG: “Write Fail!” is displayed
Screen 7: Select [6] P2P Registry Check
Check the P2P Registry address is the same as displayed in Screen 6.
Check the P2P Registry address is the same as displayed in Screen 6.
Click on the first or last page to see other HBD-N5200W / HBD-N7200W / HBD-N7200WL / HBD-N9200W / HBD-N9200WL service manuals if exist.