Sharp VC-MH732HM (serv.man29) User Manual / Operation Manual ▷ View online
GB-45
MORE INFORMATION ABOUT YOUR VCR
MANUFACTURERS CODES FOR SATELLITE RECEIVERS
The following table is a list of satellite manufacturers’ code numbers. Your VCR will use one of
these in order to recognise your satellite receiver. The code number must be entered at point
these in order to recognise your satellite receiver. The code number must be entered at point
9
. during installation with a satellite receiver.
Look up your make of satellite receiver.
Use the
NUMBER BUTTONS
to enter the first code number listed. For example number 8
should be entered
0 0 8
. Continue from point
10
. (
AUTO INSTALLATION
).
MANUFACTURER
CODES
CAMBRIDGE
53
ARMSTRONG
2,9,12,20,22,36,41,59,73,74,82
CHANNEL MASTER
12,41
BUSH
9,12,14,72,79
BEST/DISKEXPRESS
75
FERGUSON
9,14,16,45,85
TELEVES
9,14,16,35,38,41,45,47,48,49,51,52,63,65,76,80,85,90,109,110
SATSIE/ STANON
9,12,14,39,72,79
SEG
9,12,14,19,37,39,69,71,72,79,94,104,117
ALLSAT
9,14,85
ALBA
6,9,12,14,16,32,39,45,57,72,79,85
AMSTRAD/ANKARO/FIDELITY/HANSEATIC
35,38,41,47,48,49,51,52,55,63,65,76,80,90,109,110
VISIOPASS
2,9,20,22,36,59,74,82
PHILLIPS
2,9,20,22,36,59,74,82
SABA
6,9,14,16,32,45,57,85,120,122
MANHATTAN
6,9,14,16,32,45,57,85,120,122
PACE
6,9,14,16,32,45,57,85,120,122
NETWORK
9,14
MASPRO
10,26,68,84,116
ZHENDER
1,2,4,17,18,25,27,31,33,34,40,43,50,60,67,77,81,88,92,94,95,98,100,101,105,107,108
KATHREIN
2,9,10,16,17,18,20,22,25,26,27,36,40,59,67,68,74,82,84,88,92,100,105,108,112
GRUNDIG
2,16,23,44,70,91,114,119
HUTH
56,61,73,89
MORGAN
73
RADEX
2,29,31,54,58,64,87,102,118
POLYTRON
2,29,31,54,58,64,87,102,118
DNT
2,29,31,54,58,64,87,102,118
TECHNISAT
2,29,31,54,58,64,87,102,118
ECHOSTAR
2,29,31,54,58,64,87,102,118
TELEDIREKT
85,121
SIEMANS
85,121
SCHWAIGER
85,121
LUXOR
3,5,7,8,15,16,42,46,66,75,103
SALORA
3,5,7,8,15,16,42,46,66,75,103
NOKIA
2,3,5,7,8,15,16,29,31,42,46,54,58,64,66,75,87,102,103,111
SONOLOR
2,9,20,22,36,59,74,82
FUBA/TRIASAT/TRIAX/FREECOM
19,37,69,71,94,104,117
JOHANSSON/WINNERSAT
40
HIRSCHMANN
2,11,24,25,30,97
SAMSUNG
11
VORTEC
11
UNIDEN
84
QUADREL
21,28,93,96
NIKKO
21,28,93,96
TATUNG
21,28,93,96
TRISTAR
18
STRONG
18
SCIENTIFIC ATALANTA
13
G.I.JERROLD
106
MATSUI
115
WISI/TECH
1,2,4,31,33,34,43,50,60,77,81,95,98,101,107,113
PALSAT/NAGAI/PALCOM
27,94
GALAXIS/ALDES/PROSAT/SKYMASTER/ANARKO
86,99,78
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-46
CONNECTING TO THE MAINS
This VCR is suitable only for connection to UK
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse. The VCR does not
have a mains power switch. When connected
to the mains, the unit will draw current at all
times to power the clock. Be sure to unplug the
VCR when it is not to be used for several months.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked (ASTA) or (BSI) to BS-1362. Remove the
fuse cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
fuse cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
Never connect the plug to the
mains without the fuse cover
fitted.
fitted.
TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
fuse and dispose of the cut-off plug safely.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
•
blue wire to the terminal marked N or coloured black or blue.
•
brown wire to the terminal marked L or coloured red or brown.
Severe electric shock may occur if you connect the cut-off
plug to a mains socket. If a new plug is fitted, observe the
wiring code supplied by the plug manufacturer (and given
below.) If you have any doubt, consult a qualified
electrician.
plug to a mains socket. If a new plug is fitted, observe the
wiring code supplied by the plug manufacturer (and given
below.) If you have any doubt, consult a qualified
electrician.
•
Ensure neither the brown nor the blue wire is connected
to the earth terminal in your plug.
to the earth terminal in your plug.
•
Do not allow water to come into contact with the power
supply cord or plug.
supply cord or plug.
•
A damaged power supply cord or loose plug may cause
electric shock.
electric shock.
•
Contact your SHARP dealer or a qualified electrician. Do
not use the VCR.
not use the VCR.
ASA
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-47
MORE INFORMATION ABOUT YOUR VCR
SPECIFICATIONS
•
•
Format:
VHS PAL standard
Number of heads:
Four heads
PAL colour or monochrome signal: 625 lines
Maximum playing time:
480 min. with E-240 video cassette in Long Play
(LP) mode
(LP) mode
Tape width:
12.7 mm
Tape speed:
23.39 mm/s Standard Play (SP): 11.70 mm/s
Long Play (LP)
Long Play (LP)
Antenna:
75
Ω
unbalanced
Reception channels:
UHF channel 21-69
RF output signal:
UHF channel 21-69
Power requirement:
AC 230V, 50 Hz
Power consumption:
19 W approx (Low power consumption
≤
1W)
Operating temperature:
5 ˚C to 40 ˚C
Storage temperature:
-20 ˚C to 55 ˚C
Video input:
1.0 Vp-p, 75
Ω
Video output:
1.0 Vp-p, 75
Ω
Audio input:
Line1&2: -3.8 dBs, 10 k
Ω,
Line 3: -5.0 dBs, 47 k
Ω
Audio output:
Line1&2: -3.8 dBs, 1 k
Ω
Audio Out: -5.0 dBs, 1 k
Ω
Hi-Fi audio:
Dynamic range:~ 90 dBs typ. (SP); Frequency
response: 20 Hz - 20 kHz; Wow and
flutter: < 0.005% Wrm (JIS A)
response: 20 Hz - 20 kHz; Wow and
flutter: < 0.005% Wrm (JIS A)
Dimensions:
430(W) x 284(D) x 92(H) mm
Weight:
4.3 kg (approx)
Supplied accessories:
75
Ω
HF Connection cable, operation manual,
remote control, AA/R6/UM3 battery (x2)
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-47
MORE INFORMATION ABOUT YOUR VCR
SPECIFICATIONS
•
•
Format:
VHS PAL standard
Number of heads:
Four heads
PAL colour or monochrome signal: 625 lines
Maximum playing time:
480 min. with E-240 video cassette in Long Play
(LP) mode
(LP) mode
Tape width:
12.7 mm
Tape speed:
23.39 mm/s Standard Play (SP): 11.70 mm/s
Long Play (LP)
Long Play (LP)
Antenna:
75
Ω
unbalanced
Reception channels:
UHF channel 21-69
RF output signal:
UHF channel 21-69
Power requirement:
AC 230V, 50 Hz
Power consumption:
19 W approx (Low power consumption
≤
1W)
Operating temperature:
5 ˚C to 40 ˚C
Storage temperature:
-20 ˚C to 55 ˚C
Video input:
1.0 Vp-p, 75
Ω
Video output:
1.0 Vp-p, 75
Ω
Audio input:
Line1&2: -3.8 dBs, 10 k
Ω,
Line 3: -5.0 dBs, 47 k
Ω
Audio output:
Line1&2: -3.8 dBs, 1 k
Ω
Audio Out: -5.0 dBs, 1 k
Ω
Hi-Fi audio:
Dynamic range:~ 90 dBs typ. (SP); Frequency
response: 20 Hz - 20 kHz; Wow and
flutter: < 0.005% Wrm (JIS A)
response: 20 Hz - 20 kHz; Wow and
flutter: < 0.005% Wrm (JIS A)
Dimensions:
430(W) x 284(D) x 92(H) mm
Weight:
4.3 kg (approx)
Supplied accessories:
75
Ω
HF Connection cable, operation manual,
remote control, AA/R6/UM3 battery (x2)
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277