Sharp VC-MH732HM (serv.man29) User Manual / Operation Manual ▷ View online
GB-41
MORE INFORMATION ABOUT YOUR VCR
ON-SCREEN DISPLAY
All the information you need on the VCR status will be summarised on the on-screen display.
If you are recording, playing back a tape or watching a broadcast on the video channel you
can call up three standard on-screen displays. The display can be selected by pressing the
If you are recording, playing back a tape or watching a broadcast on the video channel you
can call up three standard on-screen displays. The display can be selected by pressing the
MODE OSD
button on the remote control, 1,2,3 or 4 times.
1.
AUTO
, the current mode and channel
number will be displayed for 3 seconds when an
operation or number button is pressed.
operation or number button is pressed.
2.
FULL
., all the active features will also be shown
on screen.
3.
COUNTER
, this display will show the tape
counter and amount of tape remaining.
4.
DISPLAY OFF
, this will remove the display
from the screen.
NOTES:
•
The default time and date will be displayed if the clock has not been set.
•
The VCR will return to display
1
. each time it is switched on.
•
If you are recording from this VCR to another, make sure you remove the display from
the screen otherwise it will be recorded.
the screen otherwise it will be recorded.
1.
■
1 CH 5 9
N I CAM
S T E R EO
S T E R EO
S P
L
R
Programme number and channel
Tape Status
NICAM signal
Audio output mode
Tape speed
Tape remaining
Time
Date
Tape counter
These
depend on
model
features
depend on
model
features
2.
■
1 CH 5 9
S U P E R
P .
ON
N I CAM
S T E R EO
S T E R EO
S P
L
R
2 2 : 0 0
R EM 1 : 0 5
9 / 0 7 9 9
0 : 0 0 . 0 0
REM 1:05
0:00.00
3.
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-42
TROUBLESHOOTING
TROUBLESHOOTING
PROBLEM
ANSWER
Display is not working.
• Make sure the VCR is not in LOW POWER mode.
• Make sure the power cord is plugged in.
• Make sure the wall socket has power (plug another
• Make sure the power cord is plugged in.
• Make sure the wall socket has power (plug another
appliance in).
VCR will not operate -
appears in VCR display.
• Press the TIMER ON/OFF button to disengage timer.
VCR will not respond to
any commands.
any commands.
• Check CHILD LOCK is not engaged.
• Safety device operating: unplug VCR for 2 hours.
• Safety device operating: unplug VCR for 2 hours.
Tape cannot be loaded.
• Make sure there is no other tape in the VCR.
• Make sure you are loading the tape correctly.
• Make sure you are loading the tape correctly.
VCR cannot be operated
by remote control.
by remote control.
• Remote control is too far away from the main unit.
• Point the remote control at the VCR.
• Batteries are flat - replace both.
• Batteries have not been inserted correctly.
• VCR is positioned in strong light.
• Point the remote control at the VCR.
• Batteries are flat - replace both.
• Batteries have not been inserted correctly.
• VCR is positioned in strong light.
No picture appears.
• Make sure TV is set to the video channel.
• Check all connecting cables.
• Check all connecting cables.
Rewind is not possible.
• Make sure tape is not at the start.
Picture does not change
even though CHANNEL
even though CHANNEL
/
buttons are
pressed.
• Make sure VCR is not in timer or menu mode.
Desired channel position
cannot be selected.
cannot be selected.
• The channel position has been set to be skipped. Cancel
the skip mode for that channel.
No colour or poor TV
picture on normal viewing.
picture on normal viewing.
• Make sure all the cables are connected properly.
• Make sure VCR power cord is properly plugged in.
• Make sure VCR power cord is properly plugged in.
Playback picture is snowy. • Adjust the tracking using CHANNEL
/
buttons.
• Try another tape.
• The video heads may have been contaminated - refer to
• The video heads may have been contaminated - refer to
a SHARP Service Facility.
Tape is automatically
ejected when pressing
REC (
ejected when pressing
REC (
) or TIMER
ON/OFF buttons.
• The record-protection tab has been removed.
Playback/ recording does
not playback in stereo.
not playback in stereo.
• Ensure VCR is connected to a stereo TV and SCART lead.
• Programme may not carry stereo.
• Programme may not carry stereo.
VIDEOPLUS+ does not
record desired
programme.
record desired
programme.
• Broadcast does not carry VPS/PDC signal which alters
recording time.
• Check VPS/PDC mode is switched to ON.
• Ensure date and time are correctly set on the VCR.
• Ensure date and time are correctly set on the VCR.
Satellite receiver does not
respond to VCR
commands.
respond to VCR
commands.
• Adjust the position or angle of the satellite receiver.
Desired satellite channel
cannot be selected by the
VCR.
cannot be selected by the
VCR.
• Re-install all channels ensuring that the satellite receiver is
not in any special channel setting mode and that the
desired channel is below channel 99 on your satellite
receiver.
desired channel is below channel 99 on your satellite
receiver.
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-43
VCR RESET
1.
Press
STOP
to switch on the VCR.
2.
Press and hold
MENU
and
CHANNEL
buttons together on the front of the VCR
for 10 seconds.
3.
The AUTO INSTALLATION screen should now be showing on your TV.
4.
Follow the on-screen display to proceed with auto installation.
✔
All the programmes should now be correctly tuned in and the clock set.
Refer to the
CUSTOMISED INSTALLATION
chapter if
•
Your VCR could not tune automatically - due to for example poor reception.
•
You wish to re-arrange the channel order.
•
You wish to change the time on the clock or if the VCR could not set the time.
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-44
GUARANTEE
SHARP Electronics (UK) Ltd (hereafter called Sharp) guarantee to provide for the
repair, or at its option the replacement, of this product subject to the conditions listed
below:
repair, or at its option the replacement, of this product subject to the conditions listed
below:
1.
This guarantee shall only apply to faults which are due to inferior workmanship or
materials. It does not cover faults or damage by accident, misuse, fair wear and
tear, neglect, tampering with the product, or repair other than by a Service
Facility appointed by SHARP.
materials. It does not cover faults or damage by accident, misuse, fair wear and
tear, neglect, tampering with the product, or repair other than by a Service
Facility appointed by SHARP.
2.
As this product is intended for private domestic use only, the guarantee will not
apply if the product is used in the course of a business, trade or profession.
apply if the product is used in the course of a business, trade or profession.
3.
To benefit from this guarantee, any fault which occurs must be notified to SHARP,
or its appointed Service Facility within one year from the date this product was
purchased. Proof of purchase must be provided.
or its appointed Service Facility within one year from the date this product was
purchased. Proof of purchase must be provided.
4.
The guarantee does not cover carriage costs, batteries or video tapes.
5.
In the unlikely event of this product requiring repair, please contact the supplier
from whom it was purchased. Where this is not possible, please contact the
SHARP Customer Information Centre on the telephone number given below.
from whom it was purchased. Where this is not possible, please contact the
SHARP Customer Information Centre on the telephone number given below.
6.
This guarantee is offered as an additional benefit to your statutory rights and
does not affect these rights in any way.
does not affect these rights in any way.
7.
No person has any authority to vary the terms or conditions of this guarantee.
If you have any difficulty operating this product, or would like information on other
SHARP products, please telephone the SHARP Customer Information Centre on the
number given below.
SHARP products, please telephone the SHARP Customer Information Centre on the
number given below.
SHARP Customer Helpline Tel: 0990 274277
Please note that all calls are charged at local rate.
Please note that all calls are charged at local rate.
Click on the first or last page to see other VC-MH732HM (serv.man29) service manuals if exist.