Sharp VC-MH732HM (serv.man29) User Manual / Operation Manual ▷ View online
GB-25
ADVANCED OPERATION
BLUE MUTE
The TV screen will be blue if a TV channel with no signal is selected, an unrecorded section of
tape is played or the quality of the recording on the tape is poor. Select OFF to disable this
feature.
tape is played or the quality of the recording on the tape is poor. Select OFF to disable this
feature.
1.
Press
MENU
to display the main menu on the
screen.
2.
Press [
/
] to select MODE.
3.
Press
SET
.
4.
Press [
/
] to select BLUE MUTE.
5.
Press [
/
] to select OFF.
6.
Press
SET
and then
MENU
to return to the
normal screen.
COLOUR
If the VCR is playing poor quality recording, the picture may turn black and white. Selecting
PAL may improve this (depending on the recording), although coloured speckles may appear
on black and white recordings.
PAL may improve this (depending on the recording), although coloured speckles may appear
on black and white recordings.
1.
Follow steps 1 to 3 from BLUE MUTE.
2.
Press [
/
] to select COLOUR.
3.
Press [
/
] to select AUTO/PAL.
4.
Press
SET
and then
MENU
to return to the normal screen.
MODE MENU SCREEN
N I CAM
AU T O
O F F
CO L OUR
AU T O
P A L
B L U E MU T E
AU T O
O F F
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-26
ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
SKIP SEARCHING THE VIDEO TAPE
You can search the tape in 30 second time intervals. To do this follow the procedure below:
1.
Press
PLAY/X2
(
) to start the video tape playing.
2.
Press
SKIP SEARCH
on the remote control.
The number of times you press
SKIP SEARCH
determines the forward search time.
•
After searching, normal playback
will resume automatically
will resume automatically
1 press = 30 seconds.
2 presses = 1 minute.
3 presses = 1 minute 30 seconds.
2 presses = 1 minute.
3 presses = 1 minute 30 seconds.
4 presses = 2 minutes.
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-27
ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
DIGITAL PROGRAMME SEARCH SYSTEM (DPSS)
Your VCR records a marker signal on the tape at the start of each recording. These signals can
be used later to locate the starting point of a recording.
Press
DPSS
to locate a previous programme or the next programme.
For example,
1.
Load the video tape into the VCR.
2.
Press
DPSS
three times. A 3 will appear on the on-screen display, and the VCR will
fast forward to locate the third recording after the current one.
3.
Press
DPSS
once. A -1 will appear on the on-screen display and the VCR will rewind
to locate the beginning of the current recording.
4.
To cancel the search before it has finished, press
STOP
(
) or
PLAY/X2
(
) .
NOTES:
•
Recordings must be longer than 3 minutes..
•
The starting point of playback may vary.
•
This feature will only work with video tapes recorded on a VCR with the DPSS feature.
/
-1
+1
+2
+3
RECORDING 5
RECORDING 4
RECORDING 3
RECORDING 2
RECORDING 1
DPSS Signals
Current tape position
Fast Forward
Rewind
DPSS
Number
Number
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-28
ADVANCED OPERATION
RECORDING FROM OTHER EQUIPMENT
You can record video and audio signals from various sources, for example a camcorder, onto
a video tape using your VCR.
a video tape using your VCR.
For example, recording from a camcorder connected to LINE 2 IN/DECODER on your VCR:
1.
Load tape into the VCR.
2.
Press
INPUT SELECT
on the remote control
until the VCR display shows
L2
.
3.
If you wish to record from a source connected to
LINE 1 IN/OUT, select
LINE 1 IN/OUT, select
L1
.
4.
If you wish to record from a source connected
with audio phono leads to the sockets on the
front of the VCR (if fitted), select
with audio phono leads to the sockets on the
front of the VCR (if fitted), select
L3
.
5.
Press
REC
to start the recording.
NOTE:
•
There are many different ways of connecting external equipment to your VCR. Please
refer to your equipment operation manuals for further information.
refer to your equipment operation manuals for further information.
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE
Optional Scart connection (not supplied)
Mono/Stereo Camcorder
LINE IN 3
VIDEO
L • AUDIO • R
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
Click on the first or last page to see other VC-MH732HM (serv.man29) service manuals if exist.