Sharp VC-MH732HM (serv.man29) User Manual / Operation Manual ▷ View online
GB-5
INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
IMPORTANT NOTE:
If is illuminated on the VCR display, the VCR is in STANDBY mode.
If not the VCR is in LOW POWER mode. To change between LOW POWER and
STANDBY mode press the STANDBY button on the VCR front panel.
If is illuminated on the VCR display, the VCR is in STANDBY mode.
If not the VCR is in LOW POWER mode. To change between LOW POWER and
STANDBY mode press the STANDBY button on the VCR front panel.
1.
Ensure your VCR is still in the STANDBY mode
(not low power).
(not low power).
2.
Switch on the TV.
3.
Press and hold the
MENU
button on the VCR
for 3 seconds, (The VCR is now tuning itself in).
The VCR will search and display an ideal RF
channel. (Wait for the flashing channel
number to appear in the VCR display.)
The VCR will search and display an ideal RF
channel. (Wait for the flashing channel
number to appear in the VCR display.)
4.
Select an unused preset channel on your TV
for your VCR (there may be a dedicated
video preset channel refer to your TV
operation manual).
for your VCR (there may be a dedicated
video preset channel refer to your TV
operation manual).
5.
Tune the selected preset channel on your TV
(refer to your TV manual) until the menu
screen appears. Store this as your VCR preset
channel.
(refer to your TV manual) until the menu
screen appears. Store this as your VCR preset
channel.
6.
Press
SET
to store the RF channel and to
place the VCR back into STANDBY.
NOTE:
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
✔
The TV is tuned to the VCR.
•
If you have a preferred channel, the RF channel can be set manually (21-69) after
Step 3 using [
Step 3 using [
/
] keys.
Example:
MENU SCREEN
T I ME R
MOD E
S E T U P
M N
: S E L E C T
S E T
: E N T E R
ME NU : E X I T
1.
3.
5.
4.
preset 1 = BBC1 preset 2 = BBC2
preset 3 = ITV preset 4 = Channel 4
preset 5 = Channel 5 preset ? = VCR
preset 3 = ITV preset 4 = Channel 4
preset 5 = Channel 5 preset ? = VCR
GB-6
INSTALLING YOUR VCR
AUTO INSTALLATION
SATELLITE RECEIVER / CABLE BOX CONTROL
If you have a satellite receiver or cable box connected to your VCR you can automatically
install the satellite channels using this feature. The installation procedure for cable boxes is the
same as for satellite receivers (for cable box connections refer to your cable box manual).
install the satellite channels using this feature. The installation procedure for cable boxes is the
same as for satellite receivers (for cable box connections refer to your cable box manual).
Follow steps 1-4 below before INSTALLATION PROCEDURE:
1.
Connect your satellite receiver to the VCR as previously shown.
2.
Place the satellite receiver near the VCR (ideally on the top). This ensures that the
reflected infrared signals from the VCR which control the satellite receiver can reach it
unimpeded.
reflected infrared signals from the VCR which control the satellite receiver can reach it
unimpeded.
3.
Ensure all the channels you wish to be tuned are within channel positions 1-199 on your
satellite receiver as the VCR will only tune the first 199 channels - refer to your satellite
receiver operation manual for instructions on moving channels.
satellite receiver as the VCR will only tune the first 199 channels - refer to your satellite
receiver operation manual for instructions on moving channels.
4.
Ensure the receiver is not in any special mode.
INSTALLATION PROCEDURE
These models automatically tune the TV channels for your area, then using Teletext
information sort the TV channels into a standard order and set the clock.
information sort the TV channels into a standard order and set the clock.
Turn the TV on and select the video channel . (As previously explained)
1.
2.
•
The satellite channels can now be tuned in as part of the auto-installation procedure.
You will be prompted for further information from the on-screen displays.
You will be prompted for further information from the on-screen displays.
•
SHARP cannot guarantee this feature will work with all satellite receivers and cable
boxes.
boxes.
•
See the list of satellite receiver manufacturers codes at the end of this manual.
All information relevant to satellite receiver control will display this symbol.
Press
STOP
to switch on the VCR.
Step through the on screen instructions by
pressing the
pressing the
SET
button.
REW
FF
PAUSE
/STILL
STOP
PLAY / X 2
MENU
SET
CLEAR
SV/V+
2
1
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
See next page to continue
GB-7
MENU
SET
CLEAR
SV/V+
2
INSTALLING YOUR VCR
AUTO INSTALLATION
NOTE:
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
•
If the AUTO INSTALLATION screen doesn’t
appear when you switch on your VCR or
you wish to reset your VCR and start the
installation again, refer to
appear when you switch on your VCR or
you wish to reset your VCR and start the
installation again, refer to
VCR RESET
at
the back of the book.
SAT CONTROL WILL BE HIGHLIGHTED.
If you
do
have a satellite receiver connected
to the VCR continue from point
5
.
If you
do
not
have a satellite receiver
connected to the VCR leave SAT CONTROL
set to OFF and press
set to OFF and press
SET
.
(Auto install may take a few minutes.)
3.
P L E A S E
B E
S UR E
T H E
A E R I A L / S CAR T
CAB L E I S
CONN E C T E D T O YOUR V CR .
S E T
: E N T E R ME NU : E X I T
Press the
SET
button.
2
1
CH 2 2
AU T OMA T I C
SOR T I NG .
P L E A S E WA I T .
S E T
: E N T E R ME NU : E X I T
Press the
SET
button.
2
See next page to continue
Press the
SET
button.
2
S A T
R E C E I V E R
S A T CON T RO L ON
O F F
M
N
: CHANGE
S E T
: E N T E R ME NU : E X I T
AU T O
I N S T A L L A T I ON
P R E S S
S E T
K E Y
T O S T AR T
S E T
: E N T E R ME NU : E X I T
GB-8
MENU
SET
CLEAR
SV/V+
4
MENU
SET
CLEAR
SV/V+
6
INSTALLING YOUR VCR
AUTO INSTALLATION
On completion, the
MOVE MENU
will appear
showing the standard channel order.
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
MOV E
1 / 5
1 BBC 1
7
1 3
2 BBC 2
8
1 4
3 I T V 9
1 5
4 CH 4 1 0
1 6
5 CH 5
1 1
1 7
6
1 2
1 8
S E L E C T E D : BBC 1
M N
O P
: S E L E C T E D
S E T
: E N T E R ME NU : E X I T
Press
MENU
to exit if you are happy with
the channel order, if not and you wish to
change the order refer to
change the order refer to
MANUALLY
SORTING CHANNELS
.
If the clock is not automatically set, the
clock screen will appear, refer to
clock screen will appear, refer to
MANUALLY SETTING THE CLOCK
for help on setting the time and date.
To check the clock has been set correctly
press the
press the
DISPLAY
button until the time
appears on the VCR display.
4.
Points 5-11.
(Satellite/Cable Box Control only)
(Satellite/Cable Box Control only)
Select Channel 1 on your satellite receiver.
Press [
/
], to set SAT CONTROL to ON.
S A T
R E C E I V E R
S A T CON T RO L
ON
O F F
➔
I N P U T
R F I N
L 2
S A T NO .
0 0 1
P L E A S E CONN E C T - - - - -
S A T
L 2
V CR
- - - - - - - - - - -
R
M N
: S E L E C T
M
N
: CHANGE
S E T
: E N T E R ME NU : E X I T
6.
5.
If you are NOT connecting a Satellite/Cable box control your VCR is now correctly tuned in.
Click on the first or last page to see other VC-MH732HM (serv.man29) service manuals if exist.