Sharp VC-MH732HM (serv.man29) User Manual / Operation Manual ▷ View online
GB-33
CUSTOMISED INSTALLATION
MANUALLY TUNING A CHANNEL
Normally it will not be necessary to manually tune broadcast programmes except in unusual
circumstances such as poor signal or to suit your preferences.
circumstances such as poor signal or to suit your preferences.
Ensure the video channel is selected on the TV.
1.
Press
MENU
. Press [
/
] to select SET UP. Press
SET
.
2.
CHANNEL PRESET
will be highlighted. Press
SET
to confirm.
3.
MANUAL TUNING
will be highlighted. Press
SET
to confirm.
4.
PRESET
will be highlighted. Press [
/
] to choose the required VCR preset channel.
5.
Press [
/
] to select
SOURCE
(if you have previously installed a satellite receiver).
Press [
/
] to choose the required source. If you select SAT go to point
9
.
6.
Press [
/
] to select
CHANNEL
..
If you selected CH as the source you have the option to tune terrestrial channels.
7.
Then press [
/
] to start tuning in either direction. Tuning will stop when a programme
is received. If it is not the desired programme, press [
/
] to continue tuning.
8.
Press [
/
] to select
FINE
TUNING
.
(Not available if tuning a
satellite channel). Press and hold
[
[
/
] until the sharpest colour picture
is obtained. Go to point
10
.
9.
Press [
/
] to select
CHANNEL
.
Enter preset satellite numbers using
NUMBER BUTTONS
or [
/
] to
step through each preset satellite
channel.
channel.
11.
Press [
/
]to select
SKIP
.
The SKIP function determines whether the
channel can be selected when using
channel can be selected when using
CHANNEL
[
/
] instead of the
NUMBER BUTTONS
.
12.
Press [
/
] to select ON or OFF for this
option. Press
SET
to confirm.
13.
Press
MENU
to leave this function.
IMPORTANT NOTE:
10.
Press [
/
] to select
DECODER
.
This is preset to OFF. If you wish to
connect a satellite receiver to the VCR
as shown previously, leave this set to
OFF. If you wish to connect a decoder
use
connect a satellite receiver to the VCR
as shown previously, leave this set to
OFF. If you wish to connect a decoder
use
[
/
] to turn the decoder
function ON.
The VCR has 84 programmable channel positions each of which can be set to any of the
broadcast channels.
broadcast channels.
➔
P R E S E T
1
BBC 1
SOURC E
CH S A T
CHANN E L
CH 2 1
F I N E T UN I NG
D E COD E R
ON
O F F
S K I P
ON
O F F
▲
▲
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-34
CUSTOMISED INSTALLATION
CONNECTING A SATELLITE RECEIVER/CABLE BOX
TO YOUR VCR
TO YOUR VCR
SATELLITE RECEIVER/
CABLE BOX
CABLE BOX
AERIAL OR
CATV CABLE
CATV CABLE
BACK OF
TELEVISION
4
Connect the VCR plug to
the mains socket. The VCR is
now in STANDBY mode.
the mains socket. The VCR is
now in STANDBY mode.
3
Connect the VCR
RF OUT
socket to the TV
AERIAL IN
socket with RF connection
cable (not supplied).
cable (not supplied).
Optional
SCART (not supplied). If
you have a scart lead connect it to
your TV and
your TV and
LINE 1 IN/OUT
socket on the VCR.
- The advantage of a Scart
connection is improved picture and
sound quality during playback.
- The advantage of a Scart
connection is improved picture and
sound quality during playback.
Connect your existing aerial
cable to the
cable to the
ANTENNA IN
socket on the satellite
receiver.
receiver.
1
2
Connect
ANTENNA OUT
socket on the satellite
receiver to the
receiver to the
ANTENNA
IN
socket on the VCR with
RF connection cable (not
supplied).
supplied).
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-35
CUSTOMISED INSTALLATION
SATELLITE RECEIVER/CABLE BOX INSTALLATION
If you wish to connect a satellite receiver to your VCR after auto-installation without a satellite
receiver it is not necessary to completely re-install all channels. Follow the procedure below:
If you wish to connect a satellite receiver/cable box to your VCR after auto installation
it is not necessary to completely re-install all channels. The installation procedure for
cable boxes is the same as for satellite receivers. Sharp cannot guarantee this feature
will operate with all makes of satellite receiver or cable box. (See end of this manual for
manufacturers codes.)
Follow the prodecure below:
1.
Press
MENU
.
2.
Press [
/
] to select SET UP. Press
SET
to confirm.
3.
CHANNEL PRESET
will be
highlighted. Press
SET
to confirm.
4.
Press [
/
] to select
SAT
RECEIVER
. Press
SET
to confirm. The
satellite receiver screen will appear.
5.
Follow points
6-11
in
AUTO
INSTALLATION
(satellite/cable box
control only).
6.
Then press [
/
] to select
SAT
PROG SEARCH
. Press
SET
to confirm.
The satellite channels will be installed. (This
may take a few minutes).
7.
Then press
MENU
.
MANUAL TUN I NG
S AT RE C E I V ER
S AT PROGRAM S EARCH
MANUAL TUN I NG
S AT RE C E I V ER
S AT PROGRAM S EARCH
6.
4.
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-36
CUSTOMISED INSTALLATION
MANUALLY SORTING CHANNELS
SORTING THE CHANNELS INTO YOUR PREFERRED ORDER
When your VCR tunes in broadcast channels automatically it sorts them into a standard order
using teletext information. You can change the order of the channels with the following
procedure.
using teletext information. You can change the order of the channels with the following
procedure.
1.
Press
MENU
.
2.
Press [
/
] to select SET UP. Press
SET
to
confirm.
3.
Press [
/
] o select CHANNEL SORT. Press
SET
to confirm.
4.
The MOVE position will be highlighted. Press
SET
to confirm.
5.
Press [
/
/
/
] to highlight the
channel to be moved. Press
SET
to confirm.
6.
Press [
/
/
/
] to highlight the new
position for the channel. Press
SET
to confirm.
7.
If any more channels are to be moved,repeat
procedure from step 5.
procedure from step 5.
8.
When all the channels are in your preferred
order, press
order, press
MENU
to leave the MENU
function.
MENU SCREEN
2.
MOD E
S E T U P
5.
MOV E
1 / 5
1 BBC 1
7
1 3
2 BBC 2
8
1 4
3 I T V 9
1 5
4 CH 4 1 0
1 6
5
CH 5
1 1
1 7
6
1 2
1 8
6.
MOV E
1 / 5
1
CH 5
7
1 3
2 BBC 1
8
1 4
3 BBC 2
9
1 5
4 I T V 1 0
1 6
5 CH 4 1 1
1 7
6
1 2
1 8
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
Click on the first or last page to see other VC-MH732HM (serv.man29) service manuals if exist.