DOWNLOAD Sharp VC-M522HM (serv.man29) Service Manual ↓ Size: 1.95 MB | Pages: 41 in PDF or view online for FREE

GB-13

If your VCR has long play facility and you wish 
to change the 

, use 

the [

/

] to highlight SP. Press [

/

] 

to select standard play (SP) or long play (LP) 
as required.

[See 

 below]. For VPS/ setting use

[

/

] to highlight the final column.  Using 

the [

/

] will select VPS/PDC ON or OFF 

(

✱

 = ON  

 = OFF).

Press 

 to confirm the programme. The 

VIDEOPLUS+ menu will reappear. If you wish 
to enter further VIDEOPLUS+ recordings 
repeat this procedure.

When you have completed entering timer 
settings, press 

 to remove the menu 

from the TV screen.

Press TIMER ON/OFF once to place the VCR 
in TIMER STANDBY mode.  

 will be shown on 

the display.

•

VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time 
of your VCR recording. This ensures that if there is a change in broadcast time for your 
programme the VCR will still record the whole programme. It is essential that the start 
time as it appears in the TV listing is used to program the VCR, as this information is used 
to identify the VPS/PDC signal corresponding to your programme.

•

If 

 flashes a video tape has not been inserted into the VCR.

•

If the video tape is ejected when the VCR tries to record the record protection tab has 
been  removed. 

•

During recording, press

 (

) to cancel the recording. If there are further 

recordings to be made, the VCR will return to TIMER STANDBY.

씱 씰

쑿 쑼

✱

씱 씰

쑿 쑼

TINS-3584UMZZ VC-M522HM  Page 13  Monday, June 14, 1999  2:46 PM

GB-14

You can make a maximum of eight delayed recordings up to a year in advance.

The example shown is for 24-hour clock operation. 12-hour clock operation can be selected 
from the manual clock setting menu.

12-hour clock am/pm can be selected using the 

 

 button on the remote control.

•

If  

 appears on the VCR display, press 

 before starting.

•

Check that the clock is displaying the correct time.

For example: Recording a programme on channel 3 from 21:05 to 22:30 on July 9th.

Press

 (

) to switch on the VCR.

Press 

 .

Press [

/

] to select TIMER.  Press 

 to 

confirm.

The position which is initially highlighted is the 
next available timer record entry. Press 

 to 

confirm this.

•

The display will automatically show today's 
date.  
Either: If this is the date you wish to make the 
recording on, press 

 to confirm this.

Or: enter the recording date using the[

/

] or the 

.  Enter two 

digits for the day, then two for the month. For 
example for July 9th, press 

 (9th), then 

 

(July).

Then press 

 to confirm.

If you want to make additional recordings at 
the same time each day or week, use [

/

] or select D (daily) or W (weekly).  Then 

press 

 to confirm.

Enter the channel using the [

/

] or the 

.  For example to 

record a programme on channel 3, press 0 3. 
Then press 

 to confirm.

쑿 쑼

TINS-3584UMZZ VC-M522HM  Page 14  Monday, June 14, 1999  2:46 PM

GB-15

Enter the start time using the [

/

] or the 

hours first then minutes 

(when entering less than 10 minutes add a '0' 
before the number), for example for 21:05 start, 
press 

. Then press

to confirm.

Enter the stop time, for example for 22:30 stop, 
press 

.

If your VCR has long play facility and you wish to 
change the 

, use the         

[

/

] to highlight SP. Press [

/

] to 

select standard play (SP) or long play (LP) as 
required.

[See note below]. For VPS/PDC setting use the 

[

/

] 

to highlight the final column.  Using the  

[

/

] will select VPS/PDC ON or OFF  ( * = 

ON - = OFF).

Press 

to confirm.

•

The MENU now shows all the timer settings you 
have entered. If you wish to make additional 
timer recordings, repeat this procedure.

When you have completed entering timer 
settings, press 

 to remove the menu 

from the TV screen.

Press 

once to place the VCR 

in TIMER STAND-BY mode. 

 will be shown on 

the display.

•

VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time 
of your VCR recording. This ensures that if there is a change in broadcast time for your 
programme the VCR will still record the whole programme. It is essential that the start 
time as it appears in the TV listing is used to program the VCR, as this information is used 
to identify the VPS/PDC signal corresponding to your programme.

•

If 

 flashes a video tape has not been inserted into the VCR.

•

If the video tape is ejected when the VCR tries to record the record protection tab has 
been  removed.

•

During recording, press 

 (

)  to cancel the recording. If there are further 

recordings to be made, the VCR will return to TIMER STANDBY.

TINS-3584UMZZ VC-M522HM  Page 15  Monday, June 14, 1999  2:46 PM

GB-16

If in TIMER STANDBY mode, press 

 to exit. 

Press

  to switch on the VCR.

Press 

.

Press [

/

] to select TIMER. Press 

 to 

confirm

•

All the delayed recordings in the VCR’s memory 
will be shown. 

•

You can check the settings and change or 
cancel them.

Follow steps 1 to 4 of 

.

If you wish to change a delayed recording, 
press  [

/

] to highlight the recording, 

then press 

. 

Press [

/

] to highlight the setting to be 

changed and correct it by using the[

/

] 

or the 

.

When all corrections are complete press 

, 

then press 

.

Follow steps 1 to 4 of 

.

If you wish to cancel a delayed recording, press  
[

/

] to highlight the recording to be 

cancelled, then press 

.

Press 

.

•

If there are some programmes to be recorded, do not forget to press 

 

button to return the VCR to TIMER STAND-BY mode. 

쑿 쑼

TINS-3584UMZZ VC-M522HM  Page 16  Monday, June 14, 1999  2:46 PM