Sharp VC-M522HM (serv.man29) User Manual / Operation Manual ▷ View online
GB-9
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
SHARP SUPER PICTURE
should enhance the picture quality during playback. It is
normally set to ON. To turn
SHARP SUPER PICTURE
on or off press
SUPER P.
on the
VCR front panel.
•
For double speed playback (without sound), press
PLAY/X2
(
) again.
•
To revert to normal playback, press
PLAY/X2
(
) again.
•
To stop the video tape, press
STOP
(
).
•
To eject the tape press
EJECT
on the VCR.
PICTURE DISTURBANCE DURING PLAYBACK
This VCR has an automatic tracking system which reduces picture disturbance when you start
to playback a video tape. When auto-tracking is in operation
flashes on the on-screen
display. If the picture still has disturbance you may need to manually track the video tape:
During PLAYBACK of a video tape.
•
Press
CHANNEL
or
to position picture interference off the TV screen. (Manual
Tracking)
•
Press
CHANNEL
and
buttons together to start Auto Tracking.
PAUSING AND SLOW MOTION
1.
Press
PLAY/X2
(
) to start the video tape playing.
2.
To pause the video tape, press
PAUSE/STILL
(
)
.
•
To minimise jitter whilst in pause mode press
CHANNEL
or
.
•
Press
PLAY/X2
(
) to resume playback.
3.
To playback in slow motion (without sound) press
SLOW
on the remote control. Slow
motion speed can be adjusted using the
or
buttons next to the slow button.
Picture disturbance can be improved by using the
CHANNEL
or
during slow
motion playback.
•
Press
PLAY/X2
(
)to resume playback.
NOTES:
•
There will be picture interference and possibly a change to black and white picture
using Pause and Slow functions.
using Pause and Slow functions.
•
PAUSE mode will disengage after about 5 minutes.
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 9 Monday, June 14, 1999 2:46 PM
GB-10
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
FAST FORWARDING/REWINDING A VIDEO TAPE
1.
Press
STOP
(
) to stop the video tape.
2.
Press
FAST FORWARD
(
)/
REWIND
(
) on the remote control or rotate the
shuttle dial clockwise for Fast Forward and counter clockwise for Rewind then release.
3.
To stop fast forward/rewind, press
STOP
(
).
FORWARD/REVERSE VISUAL SEARCH
Visual Search can be operated during playback by either the Fast Forward/Rewind buttons
on the remote control or by using the shuttle dial on the VCR front panel.
Remote Control Operation
1.
Press
FAST FORWARD
(
)/
REWIND
(
) during playback.
2.
To decrease the speed, press
FAST FORWARD
(
)/
REWIND
(
) again.
3.
Press
PLAY/X2
(
) to resume playback.
OR: Shuttle Dial Operation
As the Shuttle dial is rotated a soft click can be felt. During playback, rotating the dial one click
clockwise will make the VCR enter Visual search x 3 mode. An additional click clockwise or
counter clockwise will change the operation as illustrated above.
clockwise will make the VCR enter Visual search x 3 mode. An additional click clockwise or
counter clockwise will change the operation as illustrated above.
The start position shown above is only an example. The Shuttle dial can be operated from any
position.
position.
Press
PLAY/X2
(
) to resume playback at any time, or rotate the shuttle dial clockwise/
counter clockwise until the playback function is selected.
NOTE:
•
There will be picture interference and possibly a change to black and white picture
using Visual Fast Forward/Rewind functions.
using Visual Fast Forward/Rewind functions.
(ANTI)
COUNTERCLOCKWISE
CLOCKWISE
PLAYBACK
REVERSE VISUAL SEARCH x 7
REVERSE VISUAL SEARCH x 3
VISUAL SEARCH x 7
PLAY/X2
VISUAL SEARCH x 3
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 10 Monday, June 14, 1999 2:46 PM
GB-11
BASIC OPERATION
IMMEDIATE RECORDING
SELECTION OF A CHANNEL
Select the channel by using the number buttons on the remote control, or select the
next/previous channel by pressing
next/previous channel by pressing
CHANNEL
[
or
].
To change between single digit and 2-digit channel numbers, press
AM/PM
.
For example, for channel 24, press
AM/PM
then press
2
4
.
You can record the channel you are watching or a different channel.
1.
Insert a video tape into your VCR.
2.
Select the channel you wish to record on the VCR.
3.
To start recording, press
REC
(
).
4.
To pause during recording, press
PAUSE/STILL
(
).
5.
To continue recording, press
REC
(
).
6.
To stop recording, press
STOP
(
) once.
SIMPLE TIMED RECORDING:
1.
To specify a stop time, press
REC
(
).
2.
Each additional press of
REC
(
) will delay
the stop time by 10 minutes.
3.
To stop recording at any time, press
STOP
(
) once.
NOTES:
•
If the tape ends before the recording is complete the VCR will stop recording, rewind,
eject the tape and place the VCR into Standby mode, or just eject the tape and place
the VCR in Standby/timer mode if the VCR is in timer record mode.
eject the tape and place the VCR into Standby mode, or just eject the tape and place
the VCR in Standby/timer mode if the VCR is in timer record mode.
•
If the VCR ejects the video tape when you press
REC
(
) the tape is record
protected. i.e. record protection tab has been removed.
STOP 15:30
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 11 Monday, June 14, 1999 2:46 PM
GB-12
BASIC OPERATION
HOW TO USE TO MAKE A RECORDING
•
If
appears on the VCR display, press
TIMER ON/OFF
before starting.
•
Check that the clock is displaying the correct time.
VIDEOPLUS+ allows you to program the VCR to record up to eight programmes using the
VIDEOPLUS+ numbers published in TV listings...
VIDEOPLUS+ numbers published in TV listings...
1.
Press [
SV/V+
] on the remote control
2.
Enter the VIDEOPLUS+ number from the TV
listing using the
listing using the
NUMBER BUTTONS
.
NOTE:
3.
Press [
/
] to select ONCE, WEEKLY, DAILY
4.
If you want to make additional recordings at the same time each day or week, then use
[
[
/
] to select the WEEKLY, or DAILY option as appropriate.
5.
Press
SET
to confirm..
NOTE:
The first time that you use VIDEOPLUS+ to make a
recording on each channel Preset, (PR) may be
highlighted on the menu.
recording on each channel Preset, (PR) may be
highlighted on the menu.
6.
Enter the channel you wish to record using
the
the
NUMBER BUTTONS
, for example if
you wish to record channel 2 press
0 2
. The
VCR will remember this for the future.
NOTES:
•
An ERROR message will appear if you have entered a number that is not a current
VIDEOPLUS+ number. If this happens press
VIDEOPLUS+ number. If this happens press
CLEAR
to delete the numbers as required
and enter the correct VIDEOPLUS+ number
•
Check that the menu list agrees with the times shown in the TV listing. If it does not press
CLEAR
to return to the VIDEOPLUS+ menu, and re-enter the correct VIDEOPLUS+
number
You may also access the VIDEOPLUS+ menu by the following procedure:
i.
Press
MENU
.
ii.
The VIDEOPLUS+ option will be highlighted. Press
SET
to confirm.
Continue from step 2 above.
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
P R
: BBC 2
씱 씰
: S E L E C T
쑿 쑼
: CHANGE
S E T
: E N T E R ME NU : E X I T
→
P L U S COD E .
-
ONC E
WE E K L Y
DA I L Y
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 12 Monday, June 14, 1999 2:46 PM
Click on the first or last page to see other VC-M522HM (serv.man29) service manuals if exist.