DOWNLOAD Sharp VC-M522HM (serv.man29) Service Manual ↓ Size: 1.95 MB | Pages: 41 in PDF or view online for FREE

GB-33

•

Specifications are subject to change without notice as part of our policy of continuous 
improvement.

•

No liability is accepted for any inaccuracies or omissions in this publication, although 
every possible care has been taken to make it complete and as accurate as possible.

Format:

VHS PAL  standard

Number of heads:

Four heads

Video signal system::

PAL colour or monochrome signal: 625 lines

Maximum playing time:

480 min. with E-240 video cassette in Long Play 
(LP) mode

Tape width:

12.7 mm

Tape speed:

23.39 mm/s Standard Play (SP): 11.70 mm/s 
Long Play (LP)

Antenna:

75 

Ω

 unbalanced

Reception channels:

UHF channel 21-69

RF output signal:

UHF channel 21-69

Power requirement:

AC 230-240V, 50 Hz

Power consumption:

17 W approx. (Low power consumption 

≤

 1W)

Operating temperature:

5 ˚C  to 40 ˚C

Storage temperature:

-20 ˚C  to 55 ˚C

Video input:

1.0 Vp-p, 75 

Ω

Video output:

1.0 Vp-p, 75 

Ω

Audio input:

Line1&2: -3.8 dBs, 10 k

Ω, 

Line 3: -5.0 dBs, 47 k

Ω

Audio output:

Line1&2: -3.8 dBs, 1 k

Ω

Dimensions:

430(W) x 300(D) x 91.5(H) mm

Weight:

4.3 kg (approx.)

Supplied accessories:

75 

Ω

 RF Connection cable, operation manual, 

remote control, AA/R6/UM3 battery (x2)

TINS-3584UMZZ VC-M522HM  Page 33  Monday, June 14, 1999  2:46 PM

GB-34

Display is not working.

• Make sure the VCR is not in LOW POWER mode.
• Make sure the power cord is plugged in.
• Make sure the wall socket has power (plug another 

appliance in).

VCR will not operate - 

 

appears in VCR display.

• Press the TIMER ON/OFF button to disengage timer.

VCR will not respond to 
any commands.

• Check CHILD LOCK is not engaged.
• Safety device operating: unplug VCR for 2 hours.

Tape cannot be loaded. • Make sure there is no other tape in the VCR.

• Make sure you are loading the tape correctly.

VCR cannot be 
operated by remote 
control.

• Remote control is too far away from the main unit.
• Point the remote control at the VCR.
• Batteries are flat - replace both.
• Batteries have not been inserted correctly.
• VCR is positioned in strong light.

No picture appears.

• Make sure TV is set to the video channel.
• Check all connecting cables.

Rewind is not possible.

• Make sure tape is not at the start.

Picture does not change 
even though 
CHANNEL 

/

 

buttons are pressed.

• Make sure VCR is not in timer or menu mode.

Desired channel position 
cannot be selected.

• The channel position has been set to be skipped. 

Cancel the skip mode for that channel.

No colour or poor TV 
picture on normal 
viewing.

• Make sure all the cables are connected properly.
• Make sure VCR power cord is properly plugged in.

Playback picture is 
snowy.

• Adjust the tracking using CHANNEL 

 

/

 

buttons.

• Try another tape.
• The video heads may have been contaminated - refer 

to a SHARP Service Facility. 

Tape is automatically 
ejected when pressing 
REC (

) or TIMER

ON/OFF buttons.

• The record-protection tab has been removed.

VIDEOPLUS+ does not 
record desired 
programme.

• Broadcast does not carry VPS/PDC signal which alters 

recording time.

• Check VPS/PDC mode is switched to ON.
• Ensure  date and time are correctly set on the VCR.

TINS-3584UMZZ VC-M522HM  Page 34  Monday, June 14, 1999  2:46 PM

GB-35

Press 

 to switch on the VCR.

Press and hold 

 and 

 

 buttons together on the front of the VCR 

for 10 seconds.

The AUTO INSTALLATION screen should now be showing on your TV.

Follow the on-screen display to proceed with auto installation.

✔

Refer to the 

 chapter if

•

Your VCR could not tune automatically - due to for example poor reception.

•

You wish to re-arrange the channel order.

•

You wish to change the time on the clock or if the VCR could not set the time.

TINS-3584UMZZ VC-M522HM  Page 35  Monday, June 14, 1999  2:46 PM

 

GB-36

 

SHARP Electronics (UK) Ltd. (hereafter called Sharp) guarantee to provide for the 
repair, or at its option the replacement, of this product subject to the conditions listed 
below:

 

This guarantee shall only apply to faults which are due to inferior workmanship or 
materials.  It does not cover faults or damage by accident, misuse, fair wear and 
tear, neglect, tampering with the product, or repair other than by a Service 
Facility appointed by SHARP.

 

As this product is intended for private domestic use only, the guarantee will not 
apply if the product is used in the course of a business, trade or profession.

 

To benefit from this guarantee, any fault which occurs must be notified to SHARP, 
or its appointed Service Facility within one year from the date this product was 
purchased.  Proof of purchase must be provided.

 

The guarantee does not cover carriage costs, batteries or video tapes.

 

In the unlikely event of this product requiring repair, please contact the supplier 
from whom it was purchased.  Where this is not possible, please contact the 
SHARP Helpline on the telephone number given below.

 

This guarantee is offered as an additional benefit to your statutory rights and 
does not affect these rights in any way.

 

No person has any authority to vary the terms or conditions of this guarantee.

If you have any difficulty operating this product, or would like information on other 
SHARP products, please telephone the SHARP Helpline on the number given below.

 

Please note that all calls are charged at local rate.

 

TINS-3584UMZZ VC-M522HM  Page 36  Monday, June 14, 1999  4:09 PM