Sharp VC-M522HM (serv.man29) User Manual / Operation Manual ▷ View online
GB-5
INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
IMPORTANT NOTE:
If is illuminated on the VCR display, the VCR is in STANDBY mode.
If not the VCR is in LOW POWER mode. To change between LOW POWER and
STANDBY mode press the STANDBY button.
If is illuminated on the VCR display, the VCR is in STANDBY mode.
If not the VCR is in LOW POWER mode. To change between LOW POWER and
STANDBY mode press the STANDBY button.
1.
Ensure your VCR is still in the STANDBY mode
(not low power).
(not low power).
2.
Switch on the TV.
3.
Press and hold the
MENU
button on the VCR
for 3 seconds, (The VCR is now tuning itself in).
The VCR will search and display an ideal RF
channel. (Wait for the flashing channel
number to appear in the VCR display.)
The VCR will search and display an ideal RF
channel. (Wait for the flashing channel
number to appear in the VCR display.)
4.
Select an unused preset channel on your TV
for your VCR (there may be a dedicated
video preset channel refer to your TV
operation manual).
for your VCR (there may be a dedicated
video preset channel refer to your TV
operation manual).
5.
Tune the selected preset channel on your TV
(refer to your TV manual) until the menu
screen appears. Store this as your VCR preset
channel.
(refer to your TV manual) until the menu
screen appears. Store this as your VCR preset
channel.
6.
Press
SET
to store the RF channel and to
place the VCR back into STANDBY.
NOTE:
✔
The TV is tuned to the VCR.
•
If you have a preferred channel, the RF channel can be set manually (21-69) after
Step 3 using [
Step 3 using [
/
] keys.
Example:
MENU SCREEN
T I ME R
MOD E
S E T U P
쑿 쑼
: S E L E C T
S E T
: E N T E R
ME NU : E X I T
1.
3.
5.
4.
preset 1 = BBC1 preset 2 = BBC2
preset 3 = ITV preset 4 = Channel 4
preset 5 = Channel 5 preset ? = VCR
preset 3 = ITV preset 4 = Channel 4
preset 5 = Channel 5 preset ? = VCR
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 5 Monday, June 14, 1999 2:46 PM
GB-6
INSTALLING YOUR VCR
AUTO INSTALLATION
These models automatically tune the TV channels for your area, then using Teletext
information sort the TV channels into a standard order and set the clock.
information sort the TV channels into a standard order and set the clock.
Turn the TV on and select the video channel . (As previously explained).
1
2
P L E A S E
B E
S UR E
T H E
A E R I A L / S CAR T
CAB L E I S
CONN E C T E D T O YOUR V CR .
S E T
: E N T E R ME NU : E X I T
AU T O
I N S T A L L A T I ON
P R E S S
S E T
K E Y
T O S T AR T
S E T
: E N T E R ME NU : E X I T
Press the
SET
button.
2
1
CH 2 2
AU T OMA T I C
SOR T I NG .
P L E A S E WA I T .
S E T
: E N T E R ME NU : E X I T
Press the
SET
button.
2
See next page to continue
2
1
Press
STOP
to switch on the VCR.
Step through the on screen instructions by
pressing the
pressing the
SET
button. (Auto tune may take
a few minutes).
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 6 Monday, June 14, 1999 2:46 PM
GB-7
INSTALLING YOUR VCR
AUTO INSTALLATION
On completion, the
MOVE MENU
will appear
showing the standard channel order.
NOTE:
•
If the AUTO INSTALLATION screen doesn’t appear when you switch on your VCR or you
wish to reset your VCR and start the installation again, refer to
wish to reset your VCR and start the installation again, refer to
VCR RESET
at the back
of the book.
MOV E
1 / 5
1 BBC 1
7
1 3
2 BBC 2
8
1 4
3 I T V 9
1 5
4 CH 4 1 0
1 6
5 CH 5
1 1
1 7
6
1 2
1 8
S E L E C T E D : BBC 1
쑿 쑼
씱 씰
: S E L E C T E D
S E T
: E N T E R ME NU : E X I T
Press
MENU
to exit if you are happy with
the channel order, if not and you wish to
change the order refer to
change the order refer to
MANUALLY
SORTING CHANNELS
.
If the clock is not automatically set, the
clock screen will appear, refer to
clock screen will appear, refer to
MANUALLY SETTING THE CLOCK
for help on setting the time and date.
3
3
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 7 Monday, June 14, 1999 2:46 PM
GB-8
BASIC OPERATION
IMPORTANT NOTES ON YOUR VCR AND VIDEO
TAPES
TAPES
VIDEO TAPES
•
If you use only good quality video tapes, generally it will not be necessary to clean the
video heads.
video heads.
•
If poor quality tapes are used, or if a tape is loaded after changing VCR location, oxide
from the tape may "clog" the video heads. This will cause the playback picture to be
"snowy", or even disappear.
from the tape may "clog" the video heads. This will cause the playback picture to be
"snowy", or even disappear.
•
To remove minor contamination run a video tape in visual search mode. If this fails, you
will need to have the heads cleaned by a SHARP Service Facility. Please note, if cleaning
is necessary it is not covered by the guarantee.
will need to have the heads cleaned by a SHARP Service Facility. Please note, if cleaning
is necessary it is not covered by the guarantee.
•
Use video tapes which carry the
mark.
HOW TO PLAYBACK A VIDEO TAPE
PLAYBACK
1.
Switch on your TV and select the video channel.
2.
Carefully push a pre-recorded video
tape into the tape compartment.
This will switch the VCR on.
tape into the tape compartment.
This will switch the VCR on.
•
If the record-protection tab has
been removed, the VCR will start
playback as soon as the video tape
has been loaded.
been removed, the VCR will start
playback as soon as the video tape
has been loaded.
3.
To start playback, press
PLAY/
X2
(
).
BEFORE YOU PLAYBACK A VIDEO TAPE
Condensation forms in the VCR when it is moved out of or into a warm place.
If you try to playback or record, the video tape and VCR may be damaged.
Turn the VCR on and wait for about two hours until the VCR reaches room
temperature before operating.
If you try to playback or record, the video tape and VCR may be damaged.
Turn the VCR on and wait for about two hours until the VCR reaches room
temperature before operating.
SECAM
PAL
Record protection tab
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 8 Monday, June 14, 1999 2:46 PM
Click on the first or last page to see other VC-M522HM (serv.man29) service manuals if exist.