Sharp VC-M522HM (serv.man29) User Manual / Operation Manual ▷ View online
GB-25
SPECIAL FEATURES ON YOUR VCR
LOW POWER FEATURE
To meet new power regulations your VCR can be placed in LOW POWER mode. In LOW
POWER mode the VCR power consumption is reduced to below 1 Watt.
POWER mode the VCR power consumption is reduced to below 1 Watt.
LOW POWER MODE
1.
Press
STAND BY
(
) to place the VCR in STANDBY mode.
2.
Press
STAND BY
(
) again to place the VCR in LOW POWER mode. The VCR digital
display will appear blank.
The VCR power consumption will now be below 1 Watt.
DISENGAGING LOW POWER MODE
Either
Press
STAND BY
(
) to return the VCR to STANDBY mode.
Or
Press
STOP
(
) to use the VCR.
NOTES:
CHILD LOCK
You can lock your VCR with this feature. It will work even when the VCR is in standby,
preventing children from operating the VCR.
preventing children from operating the VCR.
TO ENGAGE CHILD LOCK
Press and hold
on the remote control for about 2 seconds.
flashes and then
remains lit on the VCR display confirming that CHILD LOCK
has been activated.
Regardless of what other operating buttons are touched, the VCR will continue to operate in
its present mode. If CHILD LOCK is activated during playback, once the tape reaches its end,
the VCR will automatically rewind the tape, eject it, and turn the power off.
its present mode. If CHILD LOCK is activated during playback, once the tape reaches its end,
the VCR will automatically rewind the tape, eject it, and turn the power off.
TO DISENGAGE CHILD LOCK
Press and hold
for about 2 seconds.
starts flashing and then disappears. CHILD LOCK is disengaged.
NOTES:
•
With poor signal conditions an increase in noise may be observed on the screen in LOW
POWER mode.
POWER mode.
•
When entering STANDBY, noise may be observed.
•
If a signal is input from an AV source, the VCR may not go into true LOW POWER mode.
•
When disengaging low power mode from the VCR press the Standby button.
•
If you attempt to change modes by pressing another button while CHILD LOCK is on,
the
the
indicator will flash on the VCR display.
•
If power is interrupted for more than 60 seconds (due to power failure etc), CHILD LOCK
may disengage.
may disengage.
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 25 Monday, June 14, 1999 2:46 PM
GB-26
CUSTOMISED INSTALLATION
MANUALLY TUNING A CHANNEL
It should not be necessary to tune in a broadcast channel manually except in unusual
circumstances such as poor signal.
circumstances such as poor signal.
To manually tune in a channel follow the procedure below.
1.
Press
MENU
.
2.
Press [
/
] to select SET UP. Press
SET
to confirm.
3.
CHANNEL PRESET
will be
highlighted. Press
SET
.
4.
Press [
/
] to select
CHANNEL
.
5.
Press [
/
] to start tuning in either
direction. Tuning will stop when a channel
is received. If it is not the desired channel,
press [
is received. If it is not the desired channel,
press [
/
] to continue tuning.
6.
Press [
/
] to select
FINE
TUNING
. Press and hold [
/
] until
the sharpest colour picture is obtained.
8.
Press [
/
] to select SKIP.
The SKIP function determines whether the
channel can be selected when using the
channel can be selected when using the
CHANNEL
/
instead of the
NUMBER BUTTONS
.
9.
Press [
/
] to select ON or OFF for this
option.
10.
Press
SET
to confirm.
11.
Press
MENU
to leave this function.
IMPORTANT NOTE:
7.
If you connect an independent
decoder, you must press [
decoder, you must press [
/
] to
select DECODER, then select [
/
] to
turn the decoder function ON.
C HANN E L
P R E S E T
C HANN E L S O R T
C L O C K
➔
P R E S E T
1
CHANN E L
CH 2 1
F I N E T UN I NG
▲
▲
D E COD E R
ON
O F F
S K I P
ON
O F F
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 26 Monday, June 14, 1999 2:46 PM
GB-27
CUSTOMISED INSTALLATION
MANUALLY SORTING CHANNELS
SORTING THE CHANNELS INTO YOUR PREFERRED ORDER
When your VCR tunes in broadcast channels automatically it sorts them into a standard order
using teletext information. You can change the order of the channels with the following
procedure.
using teletext information. You can change the order of the channels with the following
procedure.
1.
Press
MENU
.
2.
Press [
/
] to select SET UP. Press
SET
to
confirm.
3.
Press [
/
] to select CHANNEL SORT. Press
SET
to confirm.
4.
The MOVE position will be highlighted. Press
SET
to confirm.
5.
Press [
/
/
/
] to highlight the
channel to be moved. Press
SET
to confirm.
6.
Press [
/
/
/
] to highlight the new
position for the channel. Press
SET
to confirm.
7.
If any more channels are to be moved, repeat
procedure from step 5.
procedure from step 5.
8.
When all the channels are in your preferred
order, press
order, press
MENU
to leave the MENU
function.
MENU SCREEN
2.
MOD E
S E T U P
5.
MOV E
1 / 5
1 BBC 1
7
1 3
2 BBC 2
8
1 4
3 I T V 9
1 5
4 CH 4 1 0
1 6
5
CH 5
1 1
1 7
6
1 2
1 8
6.
MOV E
1 / 5
1
CH 5
7
1 3
2 BBC 1
8
1 4
3 BBC 2
9
1 5
4 I T V 1 0
1 6
5 CH 4 1 1
1 7
6
1 2
1 8
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 27 Monday, June 14, 1999 2:46 PM
GB-28
CUSTOMISED INSTALLATION
MANUALLY SORTING CHANNELS
DELETING CHANNELS
If there is a channel you wish to delete from the VCR memory you can follow the procedure
below.
below.
1.
Press
MENU
.
2.
Press [
/
] to select SET UP. Press
SET
to
confirm.
3.
Press [
/
] to select CHANNEL SORT. Press
SET
to confirm.
4.
Press [
/
] to select CANCEL. Press
SET
to
confirm.
5.
Press [
/
/
/
] to highlight the
channel to be cancelled.
6.
Press
SET
twice to cancel the channel.
7.
When all the channels you wish have been
cancelled, press
cancelled, press
MENU
.
CANC E L
1 / 5
1 BBC 1
7
1 3
2 BBC 2
8
1 4
3 I T V
9
1 5
4 CH 4
1 0
1 6
5
1 1
1 7
6
1 2
1 8
5.
6.
MENU SCREEN
2.
T I ME R
MOD E
S E T U P
CANC E L
1 / 5
1 BBC 1
7
1 3
2 BBC 2
8
1 4
3
CH 5
9
1 5
4 I T V
1 0
1 6
5 CH 4
1 1
1 7
6
1 2
1 8
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 28 Monday, June 14, 1999 2:46 PM
Click on the first or last page to see other VC-M522HM (serv.man29) service manuals if exist.